m
m
 
(One intermediate revision by the same user not shown)
Line 27: Line 27:
 
*[[Requirements, recommendations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
 
*[[Requirements, recommendations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
  
<noinclude>[[Category:BMP]]</noinclude>
+
<noinclude>[[Category:Level 3 - Best management practices/Structural practices/Constructed stormwater wetland]]
<noinclude>
 
[[Category:Ponds and wetlands]]
 
 
</noinclude>
 
</noinclude>

Latest revision as of 01:09, 8 February 2023

This photo shows a an example of a stormwater wetland
Example of a stormwater wetland in a largely undeveloped area.

Stormwater wetlands are similar in design to stormwater ponds and mainly differ by their variety of water depths and associated vegetative complex. They require slightly more surface area than stormwater ponds for the same contributing drainage area. Stormwater wetlands are constructed stormwater management practices, not natural wetlands. Like ponds, they can contain a permanent pool and temporary storage for water quality control and runoff quantity control.

Wetlands are widely applicable stormwater treatment practices that provide both water quality treatment and water quantity control. Stormwater wetlands are best suited for drainage areas of at least 10 acres. When designed and maintained properly, stormwater wetlands can be an important aesthetic feature of a site.


The sections in this chapter may be viewed as a single page. Note: Due to an unresolved bug, when viewing a formula in a combined article, the math markup (used for equations) is displayed. Please ignore the markup. Thanks.


Stormwater wetlands articles

This page was last edited on 8 February 2023, at 01:09.