(Created page with "<center><font size=3>'''Typical winter decommission and maintenance tasks'''</font size><br> Link to this table</center>...")
 
Line 11: Line 11:
 
<tr>
 
<tr>
 
<td>'''Source Area/Collection Surface'''</td>
 
<td>'''Source Area/Collection Surface'''</td>
<td>*Clean residual de-icing material (sand, salt) from pavement prior to spring startup </td>
+
<td>
 +
*Clean residual de-icing material (sand, salt) from pavement prior to spring startup </td>
 
</tr>
 
</tr>
  
Line 18: Line 19:
 
<tr>
 
<tr>
 
<td>'''Collection System'''</td>
 
<td>'''Collection System'''</td>
<td>*Drain and disconnect conveyances to prevent freeze/thaw damage</td>
+
<td>
 +
*Drain and disconnect conveyances to prevent freeze/thaw damage</td>
 
</tr>
 
</tr>
  

Revision as of 21:46, 16 August 2016

Typical winter decommission and maintenance tasks
Link to this table
Component Typical decommissioning and winter maintenance tasks needed prior to spring startup 1
Source Area/Collection Surface
  • Clean residual de-icing material (sand, salt) from pavement prior to spring startup
Collection System
  • Drain and disconnect conveyances to prevent freeze/thaw damage
Storage System *Drain all water from above-ground outdoor storage tanks
  • Disconnect downspouts and/or pipe upstream of the tank to prevent rainwater/snowmelt from entering the tank during winter months
  • Disconnect electrical supply that controls equipment
  • Shut off makeup water supply to prevent water from entering the tank
Treatment System *Drain and disconnect any pre-storage treatment devices that should be decommissioned during the winter
  • Decommission treatment system components per manufacturer’s guidelines
Distribution System *Switch end use supply from harvested water to public water supply (if necessary)
  • Drain all water from pumps and conveyance to prevent freeze/thaw damage
  • Disconnect electrical supply to the pump and control equipment
  • Complete all recommended winter maintenance for pumps and controls
Overflow/Bypass Systems *Drain and disconnect to prevent freeze/thaw damage