m
Line 15: Line 15:
 
*Biofiltration with elevated underdrain: [[File:Biofiltration with Elevated Underdrain.pdf]]
 
*Biofiltration with elevated underdrain: [[File:Biofiltration with Elevated Underdrain.pdf]]
 
*Biofiltration with internal water storage: [[File:Biofiltration with Internal Water Storage.pdf]]
 
*Biofiltration with internal water storage: [[File:Biofiltration with Internal Water Storage.pdf]]
*biofiltration with underdrain at bottom: [[File:Biofiltration with Underdrain at Bottom.pdf]]
+
*Biofiltration with underdrain at bottom: [[File:Biofiltration with Underdrain at Bottom.pdf]]
 
*Bioinfiltration: [[File:Bioinfiltration.pdf]]
 
*Bioinfiltration: [[File:Bioinfiltration.pdf]]
 
*Biofiltration with liner: [[File:Bioretention with Liner.pdf]]
 
*Biofiltration with liner: [[File:Bioretention with Liner.pdf]]

Revision as of 17:59, 1 April 2014

Bioretention

Infiltration

Warning: Note that the following diagram for an infiltration trench shows the depth of the trench exceeding the width. This would result in this BMP being classified as a Class V underground injection well. It is HIGHLY RECOMMENDED that the length of the trench be a minimum of two times the depth of the BMP.

Ponds

Sand filters

Swales