m
m
 
(One intermediate revision by the same user not shown)
Line 40: Line 40:
 
<tr>
 
<tr>
 
<td>'''Infiltration Basin Shape'''</td>
 
<td>'''Infiltration Basin Shape'''</td>
<td>Shape can vary from square, rectangle, round or elongate. Extents of the basin will vary by depth and drawdown time of the basin per [http://stormwater.pca.state.mn.us/index.php/Design_criteria_for_Infiltration_basin Infiltration Basin Design Criteria].</td>
+
<td>Shape can vary from square, rectangle, round or elongate. Extents of the basin will vary by depth and drawdown time of the basin per [[Design criteria for infiltration|Infiltration Basin Design Criteria]].</td>
 
<td>Decreases for rectangular installations</td>
 
<td>Decreases for rectangular installations</td>
 
<td>Increases for rectangular basin</td>
 
<td>Increases for rectangular basin</td>
Line 80: Line 80:
 
</tr>
 
</tr>
 
</table>
 
</table>
 +
 +
<noinclude>
 +
[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Hydrology and geology]]
 +
</noinclude>

Latest revision as of 21:54, 22 December 2022

Factors that affect the height and extent of a groundwater mound beneath a stormwater infiltration system
Link to this table

Model Input Parameter Description of Parameter Mound Height Mound Extent Effect on Groundwater Mounding
Horizontal Hydraulic Conductivity of Aquifer Measure of resistance to flow of water through a unit volume of aquifer matrix in the horizontal direction. Decreases as hydraulic conductivity increases Increases as hydraulic conductivity increases Increasing horizontal hydraulic conductivity allows for greater ability to transmit water away from the source of infiltration. This allows for lower height of groundwater mounding, but greater extents.
Initial Saturated Thickness of Aquifer Thickness of the aquifer, or permeable layer that can contain or transmit groundwater, within the saturated zone measured from the seasonal high water table to the bottom of the aquifer. Note this saturated zone may be a localized or perched groundwater system rather than the regional groundwater system. Minnesota regional aquifer information can be found on the MDNR groundwater provinces web page. Decreases with greater thickness Increases with greater thickness Increasing aquifer thickness allows for a larger area to transmit water to and from the source of infiltration. This allows for lower height of groundwater mounding but greater extents as water moves away from the source.
Specific Yield Governs the amount of water the unsaturated zone of an aquifer can store once recharge reaches the water table. Increases with lower values Increases with lower values Groundwater mound height and extent are lower when specific yield is higher because the aquifer can store more water per unit volume of aquifer
Infiltration Basin Shape Shape can vary from square, rectangle, round or elongate. Extents of the basin will vary by depth and drawdown time of the basin per Infiltration Basin Design Criteria. Decreases for rectangular installations Increases for rectangular basin Long narrow basins are much more efficient at infiltrating water than circular or square ones. High perimeter to area ratio basins have more efficient hydraulic sections because flow is radially away from the basin or recharge area once the mound height reaches the basin bottom.
Infiltration Basin Depth The maximum depth of ponded water within the infiltration basin.
  • This is determined by size of the basin, infiltration rate of soils, and required drawdown time per Infiltration Basin Design Criteria. Maximum of 3 feet allowed.
Increases with greater depth Increases with greater depths Greater basin depths allow for increased groundwater mounding height and extent.
Design Storm The design storm dictates the rainfall event intensity, duration, and statistical recurrence interval the infiltration basin is designed to manage. Increases with larger design storms Increases with larger design storms Larger design storms result in increased amounts of runoff and larger volume of water to be infiltrated.
Percent Impervious Cover Impervious cover represents the regions within the drainage area that are unable to infiltrate stormwater, resulting in stormwater runoff. Increases with higher percentages Increases with higher percentages Higher imperviousness results in increased amounts of stormwater runoff and larger volume of water to be infiltrated.
Recharge or Infiltration Rate The rate at which water placed within the basin reaches the water table.
  • Use as check on assumed hydraulic conductivity and design storm intensity to check the limiting infiltration factor.
  • If vertical hydraulic conductivity (1/10th of horizontal hydraulic conductivity) is greater than design storm intensity rate, adjust the vertical and corresponding hydraulic conductivity to be equal to design storm intensity value.
  • If design storm intensity is greater than vertical hydraulic conductivity, the vertical and corresponding horizontal hydraulic conductivity value assumptions are adequate.
Increases with higher rates Increases with higher rates Magnitude and extents of groundwater mounds are directly proportional to the recharge rate. Duration of recharge also impacts the height and extent of groundwater mounding. The longer the duration at the specified recharge rate, the greater the magnitude and extent of mounding.

This page was last edited on 22 December 2022, at 21:54.