m |
m |
||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | <center><font size=3>'''Median pollutant removal of total suspended solids by stormwater treatment practices. Values represent percentage of incoming pollutant load that is removed. Source: Minnesota Stormwater Manual.'''<br></font size></center> | + | <center><font size=3>'''Median pollutant removal of total suspended solids by stormwater treatment practices. Values represent percentage of incoming pollutant load that is removed. Source: Minnesota Stormwater Manual. Manual data was based on information from [http://www.bmpdatabase.org/ ASCE/EPA International Database]; [http://www.stormwaterok.net/CWP%20Documents/CWP-07%20Natl%20Pollutant%20Removal%20Perform%20Database.pdf Winer] (2000)'''<br></font size></center> |
<table class="sortable"> | <table class="sortable"> | ||
<tr> | <tr> | ||
− | <th>Bioretention<sup>a</sup></ | + | <th>BMP group</th> |
− | < | + | <th>Total suspended solids</th> |
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Bioretention<sup>a</sup></td> | ||
+ | <td>85<sup>c</sup></td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 29: | Line 33: | ||
<sup>d</sup>Note that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment. | <sup>d</sup>Note that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment. | ||
</font size> | </font size> | ||
+ | |||
+ | <noinclude> | ||
+ | [[Category:Level 2 - Pollutants/Pollutant removal]] | ||
+ | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Pollutant removal]] | ||
+ | </noinclude> |
BMP group | Total suspended solids |
---|---|
Bioretentiona | 85c |
Filtrationb | 85 |
Infiltrationd | 100 |
Stormwater ponds | 80 |
Stormwater wetlands | 75 |
aData based on fewer than five monitoring studies
bExcludes vertical sand filters and filter strips
cFiltration values used
dNote that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment.
This page was last edited on 1 August 2022, at 19:49.