Category:Level 3 - General information, reference, tables, images, and archives/Tables/Pollutant removal
Example schematic showing how pollutant load reductions are calculated for a bioretention basin with an underdrain. In this case, total volume, TSS and phosphorus credits are 100 percent for infiltrated water, while credits for filtered water (water captured by the underdrain) are 60 percent for TSS and are dependent on the media for phosphorus.
This page (Category) provides links to pages, subcategories, and/or media that contain tables providing information on pollutant removal.
Subcategories
This category has only the following subcategory.
Pages in category "Level 3 - General information, reference, tables, images, and archives/Tables/Pollutant removal"
The following 42 pages are in this category, out of 42 total.
B
C
O
P
- Pollutant concentrations and removals for iron enhanced filters
- Pollutant concentrations for bioretention BMPs
- Pollutant Removal Efficiencies from Street Sweeping for Total Solids Total Phosphorus and Total Nirogen
- Pollutant removal percentages for filtration BMPs
- Pollutant removal percentages for stormwater pond BMPs
- Potential sources of bacteria and actions to address
- Potential sources of organic matter and carbon and BMPs/Activities that could be included in your compliance schedule to address dissolved oxygen/oxygen demand applicable WLAs
- Practices for controlling pollutants in stormwater runoff
- Primary and secondary pollutant removal mechanisms
- Primary and secondary volume removal mechanisms
- Processes for removing pollutants from stormwater runoff
R
S
T
U
This page was last edited on 5 August 2022, at 00:30.