Difference between revisions of "BMP pollutant removal for total suspended solids"
m |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 33: | Line 33: | ||
<sup>d</sup>Note that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment. | <sup>d</sup>Note that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment. | ||
</font size> | </font size> | ||
| + | |||
| + | <noinclude> | ||
| + | [[Category:Level 2 - Pollutants/Pollutant removal]] | ||
| + | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Pollutant removal]] | ||
| + | </noinclude> | ||
Latest revision as of 19:49, 1 August 2022
| BMP group | Total suspended solids |
|---|---|
| Bioretentiona | 85c |
| Filtrationb | 85 |
| Infiltrationd | 100 |
| Stormwater ponds | 80 |
| Stormwater wetlands | 75 |
aData based on fewer than five monitoring studies
bExcludes vertical sand filters and filter strips
cFiltration values used
dNote that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment.
This page was last edited on 1 August 2022, at 19:49.