m
m
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<center><font size=3>'''Table summarizing specifications for permeable pavement.'''</font size><br>
+
<font size=3>'''This table shows summarizes specifications for permeable pavement.'''</font size><br>
Link to this [[Summary of specifications for permeable pavement|table]].</center>
+
Link to this [[Summary of specifications for permeable pavement|table]].
 
<table class="sortable">
 
<table class="sortable">
 
<tr>
 
<tr>
<th><center>'''Material'''</center><th>
+
<th><center>'''Material'''</center></th>
 
<th><center>'''Specification'''</center></th>
 
<th><center>'''Specification'''</center></th>
 
<th><center>'''Notes'''</center></th>
 
<th><center>'''Notes'''</center></th>
Line 27: Line 27:
 
</tr>
 
</tr>
 
</table>
 
</table>
 +
<noinclude>[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Permeable pavement]]</noinclude>

Latest revision as of 20:36, 26 July 2022

This table shows summarizes specifications for permeable pavement.
Link to this table.

Material
Specification
Notes
Permeable Pavers Surface open area: typically 5% to 15%; minimum thickness: 3 inches for vehicles; minimum compressive strength: 8,000 psi Concrete pavers conform to ASTM C936 and clay pavers C1272. Reservoir layer required to support the structural load.
Pervious Concrete
  • Void content: 15% to 35 %
  • Thickness: typically 5 to 8 inches
May not require a reservoir layer to support loads, but a layer is required for storage/infiltration. In no case should plain steel rebar or mesh be used in pervious concrete as this invites corrosion.
Porous Asphalt
  • Void content: 16% to 20 %
  • Thickness: minimum 2.5 inch surface
Reservoir layer contributes to structural load support.

This page was last edited on 26 July 2022, at 20:36.