Difference between revisions of "Calculating stormwater volume and pollutant reductions and credits"
m |
m |
||
| Line 1: | Line 1: | ||
| − | The Minnesota Pollution Control Agency is currently working with a Contractor to develop information for volume and pollutant credits for most of the BMPs discussed in this manual. | + | The Minnesota Pollution Control Agency is currently working with a Contractor to develop information for volume and pollutant credits for most of the BMPs discussed in this manual. We anticipate this information will incorporated into the Manual by early summer, 2014. Draft versions of this information can be found for the following BMPs. |
*[[Calculating_credits_for_permeable_pavement|Permeable pavement]] | *[[Calculating_credits_for_permeable_pavement|Permeable pavement]] | ||
*[[Calculating credits for tree trenches and tree boxes|Tree boxes and tree trenches]] | *[[Calculating credits for tree trenches and tree boxes|Tree boxes and tree trenches]] | ||
*[[Calculating credits for green roofs|Green roofs]] | *[[Calculating credits for green roofs|Green roofs]] | ||
| + | |||
The Minnesota Pollution Control Agency is also working with a Contractor to develop information on using the Minimal Impact Design Standards calculator to calculate credits for volume, phosphorus and total suspended solids. Drafts of that information can be found for the following BMPs. | The Minnesota Pollution Control Agency is also working with a Contractor to develop information on using the Minimal Impact Design Standards calculator to calculate credits for volume, phosphorus and total suspended solids. Drafts of that information can be found for the following BMPs. | ||
*[[Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator|Bioretention]] | *[[Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator|Bioretention]] | ||
*[[Requirements, recommendations and information for using green roofs as a BMP in the MIDS calculator|Green roofs]] | *[[Requirements, recommendations and information for using green roofs as a BMP in the MIDS calculator|Green roofs]] | ||
| + | |||
The Manual also contains information on models that can be used to calculate credits for volume and pollutants. Information on models is found on the following pages. | The Manual also contains information on models that can be used to calculate credits for volume and pollutants. Information on models is found on the following pages. | ||
| − | [[Available stormwater models and selecting a model]] | + | *[[Available stormwater models and selecting a model]] |
| − | [[The Simple Method for estimating phosphorus export ]] | + | *[[The Simple Method for estimating phosphorus export ]] |
| − | + | The original Manual contained the following credit information for Better Site Design. | |
| + | [[Credits for Better Site design]] | ||
Revision as of 12:27, 7 April 2014
The Minnesota Pollution Control Agency is currently working with a Contractor to develop information for volume and pollutant credits for most of the BMPs discussed in this manual. We anticipate this information will incorporated into the Manual by early summer, 2014. Draft versions of this information can be found for the following BMPs.
The Minnesota Pollution Control Agency is also working with a Contractor to develop information on using the Minimal Impact Design Standards calculator to calculate credits for volume, phosphorus and total suspended solids. Drafts of that information can be found for the following BMPs.
The Manual also contains information on models that can be used to calculate credits for volume and pollutants. Information on models is found on the following pages.
- Available stormwater models and selecting a model
- The Simple Method for estimating phosphorus export
The original Manual contained the following credit information for Better Site Design.
Credits for Better Site design