Difference between revisions of "Decision process for selecting liners"
m |
m |
||
| Line 34: | Line 34: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td>[http://stormwater.pca.state.mn.us/index.php/Summary_of_horizontal_and_vertical_setback_distances Separation | + | <td>[http://stormwater.pca.state.mn.us/index.php/Summary_of_horizontal_and_vertical_setback_distances Separation distance] from a BMP cannot be achieved</td> |
<td>2</td> | <td>2</td> | ||
<td></td> | <td></td> | ||
Revision as of 20:19, 2 December 2015
Design process for selecting the appropriate liner level.
Link to this table
| Condition | Design level | Note |
|---|---|---|
| Filtration BMP with less than 3 feet of separation to seasonal saturated soil or bedrock | 1 | Required under the Construction Stormwater permit |
| BMP in confirmed potential stormwater hotspot with high or very high groundwater pollution potential | 1 | Applies to all post-construction BMPs. See section on Potential stormwater hotspots for more information |
| Constructed ponds or constructed wetlands with less than 3 feet separation from seasonally high water table in a potential hotspot | 1 | |
| Karst terrain with high or very high groundwater pollution potential | 1 | See section on karst for more information |
| Maintain permanent pool in constructed ponds or constructed wetlands in areas underlain by geologic material that is fractured or has a high infiltration rate | 2 | |
| Separation distance from a BMP cannot be achieved | 2 | |
| Separate tree BMP from road, parking lot, sidewalk or adjacent walls or building foundation | 2 | To prevent tree root intrusion. See link |