Line 24: | Line 24: | ||
*[https://www.epa.gov/sites/production/files/2015-11/documents/idde_manualwithappendices.pdf Illicit Discharge Detection and Elimination A Guidance Manual for Program Development and Technical Assessments] - EPA's manual on techniques to detect and correct discharges in municipal storm drains | *[https://www.epa.gov/sites/production/files/2015-11/documents/idde_manualwithappendices.pdf Illicit Discharge Detection and Elimination A Guidance Manual for Program Development and Technical Assessments] - EPA's manual on techniques to detect and correct discharges in municipal storm drains | ||
− | ===Model | + | ===Model laguage=== |
*[https://www.epa.gov/sites/production/files/2015-12/documents/modelillicit.pdf Illicit Discharge Model Ordinance Language] - EPA's model ordinance language for municipalities to prohibit illicit discharges and connections | *[https://www.epa.gov/sites/production/files/2015-12/documents/modelillicit.pdf Illicit Discharge Model Ordinance Language] - EPA's model ordinance language for municipalities to prohibit illicit discharges and connections | ||
Our storm sewer systems carry water directly to our lakes, rivers, and wetlands without additional treatment, so to prevent pollution from entering our surface water, only clean stormwater should enter a storm sewer system. If any other discharge enters the system, it is usually an illicit discharge. Minimum Control Measure (MCM) 3 of the MS4 General Permit requires permittees to develop and implement a program to detect and eliminate illicit discharges within their storm sewer system.
The illicit discharge detection and elimination (IDDE) program must include:
Click on the blue links above in the "Requirements" section to get more information and resources specific to those permit requirements. In addition, all resources related to MCM 3 are below.