Line 24: | Line 24: | ||
*[https://www.epa.gov/sites/production/files/2015-11/documents/idde_manualwithappendices.pdf Illicit Discharge Detection and Elimination A Guidance Manual for Program Development and Technical Assessments] - EPA's manual on techniques to detect and correct discharges in municipal storm drains | *[https://www.epa.gov/sites/production/files/2015-11/documents/idde_manualwithappendices.pdf Illicit Discharge Detection and Elimination A Guidance Manual for Program Development and Technical Assessments] - EPA's manual on techniques to detect and correct discharges in municipal storm drains | ||
− | ===Model | + | ===Model language=== |
*[https://www.epa.gov/sites/production/files/2015-12/documents/modelillicit.pdf Illicit Discharge Model Ordinance Language] - EPA's model ordinance language for municipalities to prohibit illicit discharges and connections | *[https://www.epa.gov/sites/production/files/2015-12/documents/modelillicit.pdf Illicit Discharge Model Ordinance Language] - EPA's model ordinance language for municipalities to prohibit illicit discharges and connections | ||
Our storm sewer systems carry water directly to our lakes, rivers, and wetlands without additional treatment, so to prevent pollution from entering our surface water, only clean stormwater should enter a storm sewer system. If any other discharge enters the system, it is usually an illicit discharge. Minimum Control Measure (MCM) 3 of the MS4 General Permit requires permittees to develop and implement a program to detect and eliminate illicit discharges within their storm sewer system.
The illicit discharge detection and elimination (IDDE) program must include:
Click on the blue links above in the "MS4 General Permit requirements" section to get more information and resources specific to those permit requirements. In addition, all resources related to MCM 3 are below.