m |
m |
||
Line 126: | Line 126: | ||
<noinclude> | <noinclude> | ||
− | [[ | + | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Chloride, salt management]] |
</noinclude> | </noinclude> |
Table summarizing of properties of deicing agents. Adapted from Local Road Research Board, 2012, Ketcham et al., 1996 and Levelton Consultants Ltd., 2008.
Link to this table
Category | Type | Lowest Practical Melting Pavement Temperature | Potential for corrosion impairment3 | Environmental Impact | |||||
---|---|---|---|---|---|---|---|---|---|
Atmospheric Corrosion to Metals | Concrete Matrix | Concrete Reinforcing | Water Quality/Aquatic Life | Air Quality | Soils | Vegetation | |||
Chloride Based Deicers | Sodium Chloride | 15°F | High; will initiate and accelerate corrosion | Low/moderate; Will exacerbate scaling; low risk of paste attack | High: Will initiate corrosion of rebar | Moderate: Excessive chloride loading/metals contaminants; ferrocyanide additives | Low: Leads to reduced abrasives use | Moderate/High: Sodium accumulation breaks down soil structure and decreases permeability and soil stability; potential for metals to mobilize | High: Spray causes foliage damage; osmotic stress harms roots, chloride toxicosis |
Calcium Chloride | -20°F | High; Will initiate and accelerate corrosion; higher potential for corrosion related to hydroscopic properties | Low/moderate; Will exacerbate scaling; low risk of paste attack | High: Will initiate corrosion of rebar | Moderate: Excessive chloride loading; heavy metal contamination | Low: Leads to reduced abrasives use | Low/Moderate: Improves soil structure; increases permeability; potential for metals to mobilize | High: Spray causes foliage damage; osmotic stress harms roots, chloride toxicosis | |
Magnesium Chloride | -10°F | High; Will initiate and accelerate corrosion; higher potential for corrosion related to hydroscopic properties | Moderate/high: Will exacerbate scaling; risk of paste deterioration from magnesium | High: Will initiate corrosion of rebar, evidence suggest MgCl2 has the highest potential for corrosion of chloride produces | Moderate: Excessive chloride loading; heavy metal contamination | Low: Leads to reduced abrasives | Low/Moderate: Improves soil structure; increases permeability; potential for metals to mobilize | High: Spray causes foliage damage; osmotic stress harms roots, chloride toxicosis | |
Acetate Based Deicers | Calcium Magnesium Acetate | 20°F [1] | Low/moderate; Potential to initiate and accelerate corrosion due to elevated conductivity | Moderate/high: Will exacerbate scaling; risk of pate deterioration from magnesium reactions | Low; probably little or no effect | High: Organic content leading to oxygen demand | Low: Leads to reduced abrasives use | Low/Moderate: Improves soil structure; increases permeability; potential for metals to mobilize | Low: Little or no adverse effect; osmotic stress at high levels |
Potassium Acetate | -26°F [2] | Low/moderate; Potential to initiate and accelerate corrosion due to elevated conductivity | [3] | Low; probably little or no effect [4] | High: Organic content leading to oxygen demand | Low: Leads to reduced abrasives use | |||
Sodium Acetate | 0°F [5] | Relative aquatic toxicity: high | |||||||
Carbohydrates | Beet Juice | NA | Low; Potential to initiate and accelerate corrosion due to elevated conductivity clams of mitigation of corrosion require further evaluation | Low; Probably little or no effect | Low; Probably little or no effect; claims of mitigation of corrosion require further evaluation | High Organic matter leading to oxygen demand; nutrient enrichment by phosphorus and nitrogen; heavy metals | Low: Leads to reduced abrasive use | Low: Probably little or no effect; limited information available | Low: Probably little or no effect |
Molasses | NA | ||||||||
Corn Syrup | NA |
This page was last edited on 4 August 2022, at 15:50.