Difference between revisions of "Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator"
m |
m |
||
| Line 1: | Line 1: | ||
Below is a summary of requirements, recommendations and other information for using the Minimal Impacts Design Standards (MIDS) calculator for bioretention BMPs. Links to MIDS pages and the MIDS calculator are included at the bottom of this page. | Below is a summary of requirements, recommendations and other information for using the Minimal Impacts Design Standards (MIDS) calculator for bioretention BMPs. Links to MIDS pages and the MIDS calculator are included at the bottom of this page. | ||
| + | |||
| + | ==Overview== | ||
| + | [[File:Bioinfiltration MIDS.png|300px|thumb|alt=image for bioinfiltration used in MIDS calculator|Symbol used for bioinfiltration used in MIDS calculator<font zixe=3></font size>]] | ||
| + | [[File:Biofiltration.png|300px|thumb|alt=image for biofiltration (bioretention with underdrain) used in MIDS calculator|Symbol used for biofiltration (bioretention with underdrain) used in MIDS calculator<font zixe=3></font size>]] | ||
| + | The MIDS calculator includes bioinfiltration (bioretention with no underdrain) and biofiltration (bioretention with an underdrain) as BMP options. The user must input the impervious cover acreage draining to the BMP. | ||
| + | |||
| + | For bioinfiltration systems, the user must input the overflow surface area (the area of the BMP at the point where overflow occurs), the surface area of the bottom of the basin, and the depth of the basin (the depth between the overflow surface area and the bottom surface area). The volume that can be stored in the basin is equal to the basin depth times the average surface area of the basin ((overflow area + bottom surface area)divided by 2). Water is assumed to be instantaneously delivered to the basin. In reality, water would be infiltrating as the basin fills. The total volume infiltrated is thus underestimated. The user must also input the underlying soil type (HSG A, B, C, or D) and the time required for drawdown (48 hours or in the case of trout streams, 24 hours). | ||
==Requirements== | ==Requirements== | ||
| Line 49: | Line 56: | ||
*[[Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator]]</noinclude> | *[[Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator]]</noinclude> | ||
| − | + | ||
[[Category:MIDS calculator requirements]] | [[Category:MIDS calculator requirements]] | ||
Revision as of 21:18, 17 September 2013
Below is a summary of requirements, recommendations and other information for using the Minimal Impacts Design Standards (MIDS) calculator for bioretention BMPs. Links to MIDS pages and the MIDS calculator are included at the bottom of this page.
Contents
Overview
The MIDS calculator includes bioinfiltration (bioretention with no underdrain) and biofiltration (bioretention with an underdrain) as BMP options. The user must input the impervious cover acreage draining to the BMP.
For bioinfiltration systems, the user must input the overflow surface area (the area of the BMP at the point where overflow occurs), the surface area of the bottom of the basin, and the depth of the basin (the depth between the overflow surface area and the bottom surface area). The volume that can be stored in the basin is equal to the basin depth times the average surface area of the basin ((overflow area + bottom surface area)divided by 2). Water is assumed to be instantaneously delivered to the basin. In reality, water would be infiltrating as the basin fills. The total volume infiltrated is thus underestimated. The user must also input the underlying soil type (HSG A, B, C, or D) and the time required for drawdown (48 hours or in the case of trout streams, 24 hours).
Requirements
- 3 foot separation from the bottom of the bioretention system to the seasonal high water table
- Use the most restrictive infiltration rate within 3 feet of the bottom of the BMP
- Drawdown time of 24 hours when the discharge is to trout streams
- For measured infiltration rates, apply a safety factor of 2
- Pretreatment
Recommendations
- 5 acres or less for contributing area
- Maximum ponding depth of 18 inches, reduced to 6 inches if there is no site information
- Field tested infiltration rates rather than table values
Information
- Guidance on determining infiltration rates
- Information on site constraints (shallow soil, karst, etc.)
- Information on assessing BMPs
- Information on design metrics (high flow bypass, ponding depths, drawn down)
- Guidance on pretreatment
- Information on soil mixes
- Plant information, including species list that show water tolerance, potential effects of different species on infiltration rates, planting guidance
- Construction specifications
- Information on operation and maintenance of bioretention BMPs.
Links to MIDS pages
- Performance goals for new development, re-development and linear projects
- Flexible treatment options
- Ordinance goals
- MIDS calculator
Related pages
- Overview for bioretention
- Types of bioretention
- Design criteria for bioretention
- Construction specifications for bioretention
- Operation and maintenance of bioretention
- Cost-benefit considerations for bioretention
- External resources for bioretention
- References for bioretention
- Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator