Difference between revisions of "General WinSLAMM result QAQC list"
| Line 36: | Line 36: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td>Compare source area outflow pollutant concentration to values | + | <td>Compare source area outflow pollutant concentration to [https://stormwater.pca.state.mn.us/index.php?title=TSS_and_TP_EMC_literature_values_for_TMDL_modeling tabled values]</td> |
<td>Output: Land Uses → Pollutants → Concentration (mg/L)</td> | <td>Output: Land Uses → Pollutants → Concentration (mg/L)</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td>Compare TSS/TP removal rate to typical values | + | <td>Compare TSS/TP removal rate to typical [https://stormwater.pca.state.mn.us/index.php?title=Typical_BMP_TSS_and_TP_removal_rates_from_Minnesota_Stormwater_Manual tabled values]</td> |
<td>Calculate pollutant removal (%) as described in <font color="red">Table 41</font>. Note: must have junction elements upstream and downstream of all control practices</td> | <td>Calculate pollutant removal (%) as described in <font color="red">Table 41</font>. Note: must have junction elements upstream and downstream of all control practices</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
Revision as of 18:58, 6 September 2019
General WinSLAMM result QAQC list
Link to this table
| QA/QC review item | Related WinSLAMM output |
|---|---|
| Confirm total watershed area is correct | Output Summary → Total Area Modeled (ac) |
| Confirm area modeled in each land uses is correct | Review land use summary table shown in the main model space window |
| Confirm source areas or applied SLUs are correct for each land use | Review source area modeling assumptions for each land use |
| Confirm correct number of control devices modeled in drainage network and source areas | Review control practice summary table shown in the main model space window |
| Confirm correct parameters modeled in control practices | Review parameters applied in control practice parameter window for all modeled drainage area and source area control practices |
| Confirm land use, junction, and device routing | Review routing in main model space window |
| Confirm precipitation event totals are correct | Review precipitation dates and rainfall depth totals. Can be accessed through a number of output tabs including "Junction → Runoff Volume" |
| Compare source area outflow pollutant concentration to tabled values | Output: Land Uses → Pollutants → Concentration (mg/L) |
| Compare TSS/TP removal rate to typical tabled values | Calculate pollutant removal (%) as described in Table 41. Note: must have junction elements upstream and downstream of all control practices |