m |
m |
||
Line 36: | Line 36: | ||
</tr> | </tr> | ||
</table> | </table> | ||
+ | |||
+ | <noinclude> | ||
+ | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Models, modeling, model applications and examples]] | ||
+ | </noinclude> |
General MPCA Simple Estimator result QAQC list
Link to this table
QAQC / Review item | Related MIDS Calculator Output |
---|---|
Confirm total watershed area is correct | Review land use-based area assigned in the "total load" table |
Confirm annual precipitation totals are correct | Review annual rainfall values in column G and confirm all are the same value |
Review watershed pollutant concentrations | Compare watershed areal loading values in the "total load" table to literature values in Table 9 |
Review watershed routing to BMPs | Review land use-based area assigned to each BMP type |
Confirm only the directly-contributing watershed area is applied for each BMP | The area assigned to a given BMP should be only the directly-contributing watershed area and should NOT include area tributary to other BMPs upstream |
Review TSS/TP removal rates | Compare pollutant removal values to literature values. Note: percent load reduction shown for each BMP type is calculated based on the total watershed loading |
Review BMP sizing recommendations and review contributing watershed area | Bypass from undersized BMPs is not calculated. For this reason, only the area for which the BMP is correctly-sized should be modeled to the BMP (the remainder should be modeled as untreated). |
This page was last edited on 4 August 2022, at 14:28.