This site is currently undergoing revision. For more information, open this link.
Information for this page is in development. It is anticipated this page will be completed by late winter, 2014.
Information for this page is in development. It is anticipated this page will be completed by late winter, 2014.
This section will eventually have information about the MIDS calculator, including a Manual and a link to the calculator. Below is a tentative outline for the section. Pages highlighted in blue are partly populated.
Overview
A Minimal Impact Design Standards (MIDS) best management practice (BMP) calculator was developed to assist designers and regulators in determining conformance to the MIDS performance goals
- Calculator - link to the MIDS calculator
- User’s Guide
- Links to Manual pages that address the MIDS calculator
- MIDS calculator sample exercises
- MIDS technical documents - documents prepared during development of the calculator
- Technical documents - these are final work products developed by Barr Engineering during the MIDS Project. Most are specific to an individual BMP.
- Links to other calculators
- Requirements, recommendations and information for using Other as a BMP in the MIDS calculator
- Conversion units - list of conversion units that may be used with the MIDS calculator
List of Super Users
The MPCA trained over 50 people across the state to become “Super Users” of the MIDS Calculator. People on the list have agreed to help others use the calculator. Feel free to contact them if you have a question on how to use the calculator.