Acknowledgements for manufactured treatment devices Acknowledgements for manufactured treatment devices

Information: The following people contributed to these updates. Note these represent the positions of these people at the time of the Stormwater Manual update and we do not update this information.

In addition to the following individuals who participated in the workgroup, we would like to thank individuals who provided additional information and insight during development of content on manufactured treatment devices.

Technical support workgroup

• Seth Brown, PE, PhD, Storm and Stream Solutions, LLC
• Craig Fairbaugh, Regional Regulatory Manager, Contech Engineered Solutions LLC
• Chris French, National Regulatory Manager, Hydro International (former National Regulatory Manager, Bio Clean Environmental)
• Jim Herbert, PE, Vice President, Senior Civil Engineer, Barr Engineering Co.
• Matt Hernick, PE, Associate Engineer, St. Anthony Falls Laboratory
• Terry Jeffrey, CWD, Watershed Planning Manager, Riley-Purgatory-Bluff Creek Watershed District
• Laura Jester, Administrator, Bassett Creek Watershed Management Commission
• Luke Martinkosky, BMP Inspector, Capitol Region Watershed District
• Jay Michels, CPESC, NGICP/IGICP, Emmons and Olivier Resources
• Josh Phillips, Water Resources Engineer, Barr Engineering Co.
• Randy Neprash, PE, Minnesota Cities Stormwater Coalition, National Municipal Stormwater Alliance, Stantec
• Todd Shoemaker, PE, CFM, Senior Associate, Senior Water Resources Engineer, Stantec
• Udai Singh, Ph.D., PE, Water Resources Director, Mississippi Watershed Management Organization
• Scott Sobiech, PE, Vice President, Senior Water Resources Engineer, Barr Engineering Co.
• Phillip Taylor, CPSWQ, Technical Manager, Hydro International

Minnesota Pollution Control Agency

• Todd Smith, PE
• Mike Trojan, Ph.D., Hydrologist