(Created page with "<center><font size=3>'''Median pollutant removal of hydrocarbons by stormwater treatment practices. Values represent percentage of incoming pollutant load that is removed. S...")
 
m
 
(3 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
<tr>
 
<tr>
 
<th>BMP group</th>
 
<th>BMP group</th>
<th>Hydrocarbons></td>
+
<th>Hydrocarbons></th>
 
</tr>
 
</tr>
 
<tr>
 
<tr>
 
<td>Bioretention<sup>a</sup></td>
 
<td>Bioretention<sup>a</sup></td>
<td>85<sup>c</sup></td>
+
<td>80<sup>c</sup></td>
 
</tr>
 
</tr>
 
<tr>
 
<tr>
 
<td>Filtration<sup>b</sup></td>
 
<td>Filtration<sup>b</sup></td>
<td>85</td>
+
<td>80</td>
 
</tr>
 
</tr>
 
<tr>
 
<tr>
Line 24: Line 24:
 
<tr>
 
<tr>
 
<td>Stormwater wetlands</td>
 
<td>Stormwater wetlands</td>
<td>75</td>
+
<td>85</td>
 
</tr>
 
</tr>
 
</table>
 
</table>
Line 33: Line 33:
 
<sup>d</sup>Note that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment.
 
<sup>d</sup>Note that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment.
 
</font size>
 
</font size>
 +
 +
<noinclude>
 +
[[Category:Level 2 - Pollutants/Pollutant removal]]
 +
[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Pollutant removal]]
 +
</noinclude>

Latest revision as of 19:49, 1 August 2022

Median pollutant removal of hydrocarbons by stormwater treatment practices. Values represent percentage of incoming pollutant load that is removed. Source: Minnesota Stormwater Manual. Manual data was based on information from ASCE/EPA International Database; Winer (2000)
BMP group Hydrocarbons>
Bioretentiona 80c
Filtrationb 80
Infiltrationd 100
Stormwater ponds 80
Stormwater wetlands 85

aData based on fewer than five monitoring studies
bExcludes vertical sand filters and filter strips
cFiltration values used
dNote that 100% is assumed for all infiltration, but only for that portion of the flow fully treated in the infiltration facility; by-passed runoff does not receive any treatment.

This page was last edited on 1 August 2022, at 19:49.