m
Line 17: Line 17:
 
*Also see guidance on [http://stormwater.pca.state.mn.us/index.php/Stormwater_infiltration_and_setback_%28separation%29_distances setback distances]
 
*Also see guidance on [http://stormwater.pca.state.mn.us/index.php/Stormwater_infiltration_and_setback_%28separation%29_distances setback distances]
  
In addition to the above questions, sizing and design information in this manual can be used to determine the amount of infiltration feasible at a site. See sizing information in the various [http://stormwater.pca.state.mn.us/index.php/Category:Design_criteria design sections] of this manual. The [[MIDS calculator]] may also be used to calculate infiltration volumes based on BMP sizing information.
+
In addition to the above questions, the sizing and design information in this manual can be used to determine the amount of infiltration feasible at a site. See sizing information in the various [http://stormwater.pca.state.mn.us/index.php/Category:Design_criteria design sections] of this manual. The [[MIDS calculator]] may also be used to calculate infiltration volumes based on BMP sizing information.
  
 
Guidance for determining the feasibility of infiltrating stormwater has been developed for locations outside Minnesota. Examples can be found through a simple Google search on ''stormwater infiltration guidance''.
 
Guidance for determining the feasibility of infiltrating stormwater has been developed for locations outside Minnesota. Examples can be found through a simple Google search on ''stormwater infiltration guidance''.

Revision as of 20:22, 17 July 2015

This site is currently undergoing revision. For more information, open this link.
This site was recently updated and is undergoing development. Anticipated completion date is July, 2015.

This page provides information for determining the feasibility of infiltrating stormwater at a site.

The Minimal Impact Design Standards (MIDS) design sequence flowchart can be used to make decisions about the feasibility of infiltrating stormwater at a site. Although the flowchart focuses on MIDS performance goals, it can be adapted to help determine if infiltration restrictions exist at a site. Potential constraints to infiltration, with links to the MIDS flowchart and other guidance in this manual, are shown below.

In addition to the above questions, the sizing and design information in this manual can be used to determine the amount of infiltration feasible at a site. See sizing information in the various design sections of this manual. The MIDS calculator may also be used to calculate infiltration volumes based on BMP sizing information.

Guidance for determining the feasibility of infiltrating stormwater has been developed for locations outside Minnesota. Examples can be found through a simple Google search on stormwater infiltration guidance.

Caution: Caution must be exercised in applying guidance from other locations to Minnesota since regulations may differ.

Two examples that may be useful are indicated below.

  • Wisconsin Site Evaluation for Stormwater Infiltration
  • Strategies/Guidance for Managing Stormwater: Infiltration vs. Surface Water Discharge. Clark, S., Baker, K., Lalor, M., Mikula, J., and Burkhardt, C. (2005). Impacts of Global Climate Change: pp. 1-12. doi: 10.1061/40792(173)228.