(39 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[file:Stillwater rain garden 2.JPG|thumb|300px|alt=photo of a rain garden|<font size=3>A raingarden in a commercial development, Sillwater, Minnesota.</font size>]]
+
[[File:Pdf image.png|100px|thumb|alt=pdf image|<font size=3>[https://stormwater.pca.state.mn.us/index.php?title=File:Overview_for_bioretention_-_Minnesota_Stormwater_Manual_June_2022.pdf Download pdf]</font size>]]
 +
[[File:General information page image.png|right|100px|alt=image]]
 +
[[file:RG pic1.jpg|thumb|300px|alt=photo of a rain garden|<font size=3>A rain garden in a residential development. Photo courtesy of Katherine Sullivan.</font size>]]
  
Bioretention is a terrestrial-based (up-land as opposed to wetland) water quality and water quantity control process. Bioretention employs a simplistic, site-integrated design that provides opportunity for runoff infiltration, filtration, storage, and water uptake by vegetation.
+
Bioretention is a terrestrial-based (up-land as opposed to wetland) water quality and water quantity control process. Bioretention employs a simplistic, site-integrated design that provides opportunity for runoff <span title="Infiltration Best Management Practices (BMPs) treat urban stormwater runoff as it flows through a filtering medium and into underlying soil, where it may eventually percolate into groundwater. The filtering media is typically coarse-textured and may contain organic material, as in the case of bioinfiltration BMPs."> [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_infiltration_Best_Management_Practices '''infiltration''']</span>, <span title="Filtration Best Management Practices (BMPs) treat urban stormwater runoff as it flows through a filtering medium, such as sand or an organic material. They are generally used on small drainage areas (5 acres or less) and are primarily designed for pollutant removal. They are effective at removing total suspended solids (TSS), particulate phosphorus, metals, and most organics. They are less effective for soluble pollutants such as dissolved phosphorus, chloride, and nitrate."> [https://stormwater.pca.state.mn.us/index.php?title=Filtration '''filtration''']</span>, storage, and water uptake by vegetation.
  
Bioretention areas are suitable stormwater treatment practices for all land uses, as long as the contributing drainage area is appropriate for the size of the facility. Common bioretention opportunities include landscaping islands, cul-de-sacs, parking lot margins, commercial setbacks, open space, rooftop drainage and street-scapes (i.e., between the curb and sidewalk). Bioretention, when designed with an under-drain and liner, is also a good design option for treating [[Potential stormwater hotspots|potential stormwater hotspots]] (PSHs). Bioretention is extremely versatile because of its ability to be incorporated into landscaped areas. The versatility of the practice also allows for bioretention areas to be frequently employed as stormwater retrofits.
+
Bioretention areas are suitable stormwater treatment practices for all land uses, as long as the <span title="The total drainage area, including pervious and impervious surfaces, contributing to a BMP"> '''[https://stormwater.pca.state.mn.us/index.php?title=Contributing_drainage_area_to_stormwater_BMPs contributing drainage area]'''</span> is appropriate for the size of the facility. Common bioretention opportunities include landscaping islands, cul-de-sacs, parking lot margins, commercial setbacks, open space, rooftop drainage and street-scapes (i.e., between the curb and sidewalk). Bioretention, when designed with an <span title="An underground drain or trench with openings through which the water may percolate from the soil or ground above"> '''underdrain'''</span> and [https://stormwater.pca.state.mn.us/index.php?title=Liners_for_stormwater_management liner], is also a good design option for treating potential <span title="Stormwater Hotspots (PSHs) are activities or practices that have the potential to produce relatively high levels of stormwater pollutants"> '''[https://stormwater.pca.state.mn.us/index.php?title=Potential_stormwater_hotspots stormwater hotspots]'''</span> (PSHs). Bioretention is extremely versatile because of its ability to be incorporated into landscaped areas. The versatility of the practice also allows for bioretention areas to be frequently employed as stormwater retrofits.
  
 
==Function within stormwater treatment train==
 
==Function within stormwater treatment train==
Unlike end-of-pipe BMPs, bioretention facilities are typically shallow depressions located in upland areas of a [[Using the treatment train approach to BMP selection|stormwater treatment train]]. The strategic, uniform distribution of bioretention facilities across a development site results in smaller, more manageable subwatersheds, and thus, will help in controlling runoff close to the source where it is generated ([[References for bioretention|Prince George’s County Bioretention Manual]], 2002). Bioretention facilities are designed to function by essentially mimicking certain physical, chemical, and biological processes that occur in the natural environment. Depending upon the design of a facility, different processes can be maximized or minimized depending on the type of pollutant loading expected ([[References for bioretention|Prince George’s County]], 2002).
+
Unlike end-of-pipe BMPs, bioretention facilities are typically shallow depressions located in upland areas of a <span title="Multiple BMPs that work together to remove pollutants utilizing combinations of hydraulic, physical, biological, and chemical methods"> [https://stormwater.pca.state.mn.us/index.php?title=Using_the_treatment_train_approach_to_BMP_selection '''treatment train''']</span>. The strategic, uniform distribution of bioretention facilities across a development site results in smaller, more manageable subwatersheds, and thus, will help in controlling runoff close to the source where it is generated ([https://www.slideshare.net/Sotirakou964/md-prince-georges-county-bioretention-manual Prince George’s County Bioretention Manual], 2002). Bioretention facilities are designed to function by essentially mimicking certain physical, chemical, and biological processes that occur in the natural environment. Depending upon the design of a facility, different processes can be maximized or minimized depending on the type of pollutant loading expected (Prince George’s County, 2002).
  
 
{{alert|bioretention facilities are designed to mimic a site's natural hydrology|alert-success}}
 
{{alert|bioretention facilities are designed to mimic a site's natural hydrology|alert-success}}
  
 
==MPCA permit applicability==
 
==MPCA permit applicability==
One of the goals of this Manual is to facilitate understanding of and compliance with the MPCA [http://www.pca.state.mn.us/water/stormwater/stormwater-c.html Construction General Permit] (CGP), which includes design and performance standards for permanent stormwater management systems. Standards for various categories of stormwater management practices must be applied in all projects in which at  
+
One of the goals of this Manual is to facilitate understanding of and compliance with the MPCA [https://stormwater.pca.state.mn.us/index.php?title=Construction_stormwater_program Construction General Permit] (CGP), which includes design and performance standards for <span title="Stormwater management practice that will be operational after the land disturbing activities are completed"> '''permanent stormwater management'''</span> systems. Standards for various categories of stormwater management practices must be applied in all projects in which at least one acre of new impervious area is being created.
least one acre of new impervious area is being created.
 
  
For regulatory purposes, bioretention practices fall under the “Infiltration / Filtration” category described in Part III.D.1. of the CGP. If used in combination with other practices, credit for combined stormwater treatment can be given. Due to the statewide prevalence of the MPCA permit, design guidance in this section is presented with the assumption that the permit does apply. Also, although it is expected that in many cases the bioretention practice will be used in combination with other practices, standards are described for the case in which it is a stand-alone practice.
+
For regulatory purposes, bioinfiltration practices fall under ''Infiltration systems'' described in the CGP. Biofiltration practices fall under ''Filtration systems'' of the permit. If used in combination with other practices, credit for combined stormwater treatment can be given. Due to the statewide prevalence of the MPCA permit, design guidance is presented with the assumption that the permit does apply. Also, although it is expected that in many cases the bioretention practice will be used in combination with other practices, standards are described for the case in which it is a stand-alone practice.
  
 
There are situations, particularly retrofit projects, in which a bioretention practice is constructed without being subject to the conditions of the MPCA permit. While compliance with the permit is not required in these cases, the standards it establishes can provide valuable design guidance to the user. It is also important to note that additional and potentially more stringent design requirements may apply for a particular bioretention practice, depending on where it is situated both jurisdictionally and within the surrounding landscape.
 
There are situations, particularly retrofit projects, in which a bioretention practice is constructed without being subject to the conditions of the MPCA permit. While compliance with the permit is not required in these cases, the standards it establishes can provide valuable design guidance to the user. It is also important to note that additional and potentially more stringent design requirements may apply for a particular bioretention practice, depending on where it is situated both jurisdictionally and within the surrounding landscape.
  
 
==Retrofit suitability==
 
==Retrofit suitability==
The ability to use bioretention as a retrofit often depends on the age of development within a subwatershed. Subwatersheds that have been developed over the last few decades often present many bioretention opportunities because of open spaces created by modern setback, screening and landscaping requirements in local zoning and building codes. However, not every open area will be a good candidate for bioretention due to limitations associated with existing inverts of the storm drain system and the need to tie the [[Glossary#U|underdrain]] from the bioretention area (for practices requiring an underdrain) into the storm drain system. In general, 4 to 6 feet of elevation above this invert or use of an upturned elbow is needed to drive stormwater through the proposed bioretention area.
+
The ability to use bioretention as a retrofit often depends on the age of development within a subwatershed. Subwatersheds that have been developed over the last few decades often present many bioretention opportunities because of open spaces created by modern setback, screening and landscaping requirements in local zoning and building codes. However, not every open area will be a good candidate for bioretention due to limitations associated with existing <span title="Invert level is the base interior level of a pipe, trench or tunnel; it can be considered the "floor" level"> '''inverts'''</span> of the storm drain system and the need to tie the <span title="An underground drain or trench with openings through which the water may percolate from the soil or ground above"> '''underdrain'''</span> from the bioretention area (for practices requiring an underdrain) into the storm drain system. In general, 4 to 6 feet of elevation above this invert or use of an [https://stormwater.pca.state.mn.us/index.php?title=Bioretention_terminology#Biofiltration_with_internal_water_storage upturned elbow] is needed to drive stormwater through the proposed bioretention area.
  
 
==Special receiving waters suitability==
 
==Special receiving waters suitability==
The tables below provide guidance regarding the use of bioretention practices in areas upstream of special receiving waters. Note that the suitability of a bioretention practice depends on whether the practice has an underdrain (i.e. filtration vs. infiltration practice).
+
The table below provides guidance regarding the use of bioretention practices in areas upstream of <span title="Waters with qualities that warrant extra protection"> [https://stormwater.pca.state.mn.us/index.php?title=Construction_stormwater_program#Special_Waters_and_Impaired_Waters '''special receiving waters''']</span>. Note that the suitability of a bioretention practice depends on whether the practice has an underdrain (i.e. filtration vs. infiltration practice).
  
{{:Design restrictions for special waters}}
+
{{:Infiltration and filtration bmp design restrictions for special waters and watersheds}}
  
{{:Infiltration BMP design restrictions for special watersheds}}
+
It is ''Highly Recommended'' that bioretention practices be designed <span title="A stormwater system in which part or all of the stormwater runoff is diverted from the primary treatment practice. Partial diversion is employed for bypass runoff, which is runoff in excess of the designed treatment volume of the practice. Full offline diversion is employed as a temporary means to divert all runoff from a stormwater practice, typically to avoid erosion of exposed soil or establishment of vegetation."> '''offline'''</span>. Offline facilities are defined by the <span title="The route that water takes when moving through a channel, bmp (e.g. a stormwater pond), or other structure."> '''flow path'''</span> through the facility. Any facility that utilizes the same entrance and exit flow path upon reaching pooling capacity is considered an offline facility.
 
 
It is ''Highly Recommended'' that bioretention practices be designed off-line. off-line facilities are defined by the flow path through the facility. Any facility that utilizes the same entrance and exit flow path upon reaching pooling capacity is considered an off-line facility.
 
  
 
==Cold climate suitability==
 
==Cold climate suitability==
Studies conducted since the 2008 version of this manual indicate the difference between summer and winter performance of bioretention systems is not substantial, even on sites with severe winters (Davidson, et al., 2008; Dietz et al., 2006; Kahn et al., 2012; LeFevre et al., 2009; Roseen et al., 2009; Toronto and Region Conservation (TRCA), ). [http://www.ndwrcdp.org/documents/04-DEC-13SG/04DEC13SG%20FACTSHEET.pdf Davidson et al.] (2008) provide several recommendations for bioretention systems in cold climates.  These recommendations are consistent with [[Design criteria for bioretention#Materials specifications - filter media|design recommendations]] in the Minnesota Stormwater Manual.
+
Studies conducted since the 2008 version of this manual indicate the difference between summer and winter performance of bioretention systems is not substantial, even on sites with severe winters ([https://www.deeproot.com/blog/blog-entries/does-bioretention-still-work-when-the-ground-freezes-maximizing-bioretention-cold-climate-performance/ Shanstrom], 2012; Davidson, et al., 2008; Dietz and Clausen, 2006; Kahn et al., 2012; LeFevre et al., 2009; [https://www.researchgate.net/publication/253847256_Seasonal_Performance_Variations_for_StormWater_Management_Systems_in_Cold_Climate_Conditions Roseen et al.], 2009; Toronto and Region Conservation (TRCA), 2008). [https://www.yumpu.com/en/document/view/32101879/recommendations-to-optimize-hydrologic-bioretention-performance Davidson et al.] (2008) provide several recommendations for bioretention systems in cold climates.  These recommendations are consistent with [[Design criteria for bioretention#Materials specifications - filter media|design recommendations]] in the Minnesota Stormwater Manual.
  
 
==Water quantity treatment==
 
==Water quantity treatment==
High-flow bypass systems are utilized to safely discharge stormwater when bioretention cells fill and reach their maximum ponding depth.  This will occur during storms exceeding the water quality design storm.  There are typically three types of high-flow bypass systems which are split into two categories: off-line and on-line.  Whenever possible, off-line designs are preferable, as they reduce the potential for internal erosion in the bioretention cell.  Off-line facilities are defined by the flow path through the bioretention cell.  Any facility that utilizes the same entrance and exit point upon reaching maximum ponding depth is considered an off-line system.  This is typically achieved with a curb cut set at the intended elevation of maximum ponding or through the use of some other upstream diversion, which results in flow bypass down the gutter when the cell has filled.  This type of bypass is often simple to utilize in retrofit situations (commercial and transportation applications) where existing drainage infrastructure is present.
+
High-flow <span title="Stormwater runoff in excess of the design flow, which is diverted around a stormwater structure"> '''bypass'''</span> systems are utilized to safely discharge stormwater when bioretention cells fill and reach their maximum ponding depth.  This will occur during storms exceeding the <span title="The volume of water that is treated by a BMP."> [https://stormwater.pca.state.mn.us/index.php?title=Water_quality_criteria '''Water Quality Volume''']</span> design storm.  There are typically three types of high-flow bypass systems which are split into two categories: offline and online.  Whenever possible, offline designs are preferable, as they reduce the potential for internal erosion in the bioretention cell.  Offline facilities are defined by the flow path through the bioretention cell.  Any facility that utilizes the same entrance and exit point upon reaching maximum ponding depth is considered an offline system.  This is typically achieved with a curb cut set at the intended elevation of maximum ponding or through the use of some other upstream diversion, which results in flow bypass down the gutter when the cell has filled.  This type of bypass is often simple to utilize in retrofit situations (commercial and transportation applications) where existing drainage infrastructure is present.
  
Where off-line designs are not achievable, it is ''Highly Recommended'' that bioretention practices be designed to route high flows on the shortest flow path across the cell to avoid scour in the bioretention practice.  The overflow location should be placed as close as practicable to the inlet(s). No matter the bypass design, energy dissipation should always be provided at the inlet(s) to avoid high flow velocity and associated turbulence that can re-suspended particulates and cause erosion in the bioretention cell.
+
Where offline designs are not achievable, it is ''Highly Recommended'' that bioretention practices be designed to route high flows on the shortest flow path across the cell to avoid scour in the bioretention practice.  The overflow location should be placed as close as practicable to the inlet(s). No matter the bypass design, energy dissipation should always be provided at the inlet(s) to avoid high flow velocity and associated turbulence that can re-suspended particulates and cause erosion in the bioretention cell.
  
Two types of on-line bypass systems may be used.  The first option is to utilize an internal drainage inlet.  Concrete box drop structures may be used to provide an overflow for bioretention cells; however, they should be located away from the inlet(s) to provide an elongated flow path and prevent short-circuiting.  These internal drainage structures may be tied into the existing drainage infrastructure, which is an attractive benefit in commercial applications.  When using these high-flow
+
Two types of online bypass systems may be used.  The first option is to utilize an internal drainage inlet.  Concrete box drop structures may be used to provide an overflow for bioretention cells; however, they should be located away from the inlet(s) to provide an elongated flow path and prevent <span title="A condition that occurs when water flows along a nearly direct pathway from the inlet to the outlet of a tank or basin, often resulting in shorter contact, reaction, or settling times in comparison with the calculated or presumed detention times."> '''short-circuiting'''</span>.  These internal drainage structures may be tied into the existing drainage infrastructure, which is an attractive benefit in commercial applications.  When using these high-flow bypass devices, it is critical to set the brink-of-overflow elevation properly, otherwise the cell will not function properly when construction is complete.  In a tree-shrub-mulch cell, the internal drainage inlets should have a system of screens to prevent loss of mulch.  These overflow devices should be designed to safely pass the design discharge.
bypass devices, it is critical to set the brink-of-overflow elevation properly, otherwise the cell will not function properly when construction is complete.  In a tree-shrub-mulch cell, the internal drainage inlets should have a system of screens to prevent loss of mulch.  These overflow devices should be designed to safely pass the design discharge.
 
  
A second option is to use a broad crested or compound weir in the berm of the bioretention cell to convey overflow.  This will typically be the best option in residential, institutional, and rural bioretention applications, where the overflow can tie in to an existing surface conveyance (swale or ditch).  Weir structures may be constructed of pressure-treated lumber, cast-in-place concrete, or precast concrete.  The invert of the weir should be set at the intended brink-of-overflow elevation.  This type of bypass structure should be designed to non-erosively bypass the design discharge.  
+
A second option is to use a broad crested or compound <span title="A low dam built across a river or body of flowing water to raise the level of water upstream or regulate its flow."> '''weir'''</span> in the <span title="a level space, shelf, or raised barrier (usually made of compacted soil) separating two areas"> '''berm'''</span> of the bioretention cell to convey overflow.  This will typically be the best option in residential, institutional, and rural bioretention applications, where the overflow can tie in to an existing surface conveyance (<span title="Are configured as shallow, linear channels. They typically have vegetative cover such as turf or native perennial grasses"> [https://stormwater.pca.state.mn.us/index.php?title=Dry_swale_(Grass_swale) '''swale''']</span> or ditch).  Weir structures may be constructed of pressure-treated lumber, cast-in-place concrete, or precast concrete.  The invert of the weir should be set at the intended brink-of-overflow elevation.  This type of bypass structure should be designed to non-erosively bypass the design discharge.  
  
In limited cases, a bioretention practice may be able to accommodate the channel protection volume, Vcp, in either an off-line or on-line configuration, and in general they do provide some (albeit limited) storage volume. Bioretention can help reduce detention requirements for a site by providing elongated flow paths, longer times of concentration, and volumetric losses from infiltration and evapotranspiration. Experience and modeling analysis have shown that bioretention can be used for stormwater management quantity control when facilities are distributed throughout a site to reduce runoff and maintain the pre-existing time of concentration. This effort can be incorporated into the site hydrologic analysis. Generally, however, it is ''Highly Recommended'' that in order to meet site water quantity or peak discharge criteria, another structural control (e.g. detention) be used in conjunction with a bioretention area.
+
In limited cases, a bioretention practice may be able to accommodate the [https://stormwater.pca.state.mn.us/index.php?title=Unified_sizing_criteria channel protection volume], V<sub>cp</sub>, in either an offline or online configuration, and in general they do provide some (albeit limited) storage volume. Bioretention can help reduce detention requirements for a site by providing elongated flow paths, longer times of concentration, and volumetric losses from infiltration and <span title="Loss of water to the atmosphere as a result of the joint processes of evaporation and transpiration through vegetation"> '''evapotranspiration'''</span>. Experience and modeling analysis have shown that bioretention can be used for stormwater management quantity control when facilities are distributed throughout a site to reduce runoff and maintain the pre-existing time of concentration. This effort can be incorporated into the site hydrologic analysis. Generally, however, it is ''Highly Recommended'' that in order to meet site water quantity or peak discharge criteria, another structural control (e.g. detention) be used in conjunction with a bioretention area.
  
 
No matter the type of overflow device used, it is important that the designer provide non-erosive flow velocities at the outlet point to reduce downstream erosion.  During the 10-year or 25-year storm (depending on local drainage criteria), discharge velocity should be kept below 4 feet per second for grassed channels.  Erosion control matting or rock should be specified if higher velocities are expected.
 
No matter the type of overflow device used, it is important that the designer provide non-erosive flow velocities at the outlet point to reduce downstream erosion.  During the 10-year or 25-year storm (depending on local drainage criteria), discharge velocity should be kept below 4 feet per second for grassed channels.  Erosion control matting or rock should be specified if higher velocities are expected.
Line 52: Line 50:
 
Bioretention is an excellent stormwater treatment practice due to the variety of pollutant removal mechanisms including vegetative filtering, settling, evaporation, infiltration, transpiration, biological and microbiological uptake, and soil adsorption. Pollutant removal and effluent concentration data for select parameters are provided in the two tables below.
 
Bioretention is an excellent stormwater treatment practice due to the variety of pollutant removal mechanisms including vegetative filtering, settling, evaporation, infiltration, transpiration, biological and microbiological uptake, and soil adsorption. Pollutant removal and effluent concentration data for select parameters are provided in the two tables below.
  
{{alert|The information in the tables below will be updated in summer of 2014. Ranges will be provided rather than a single number because the data are highly variable.|alert-warning}}
+
{{:Median pollutant removal percentages for BMPs}}
 
 
{{:Pollutant removal percentages for bioretention BMPs}}
 
  
{{:Pollutant concentrations for bioretention BMPs}}
+
{{:Pollutant concentrations for stormwater BMPs}}
  
 
Early bioretention facilities were designed to provide water quality benefits by controlling the “first flush” event. Using highly permeable planting soils and an underdrain creates a high-rate biofilter, which can treat 90 to 95 percent (or higher) of the total annual volume of rainfall/runoff, depending on the design.
 
Early bioretention facilities were designed to provide water quality benefits by controlling the “first flush” event. Using highly permeable planting soils and an underdrain creates a high-rate biofilter, which can treat 90 to 95 percent (or higher) of the total annual volume of rainfall/runoff, depending on the design.
Line 75: Line 71:
  
 
==Related pages==
 
==Related pages==
*[[Bioretention terminology]]
+
*[[Bioretention terminology]] (including types of bioretention)
 
*[[Overview for bioretention]]
 
*[[Overview for bioretention]]
<!--*[[Types of bioretention]]-->
 
 
*[[Design criteria for bioretention]]
 
*[[Design criteria for bioretention]]
 
*[[Construction specifications for bioretention]]
 
*[[Construction specifications for bioretention]]
 
*[[Operation and maintenance of bioretention]]
 
*[[Operation and maintenance of bioretention]]
 +
*[[Assessing the performance of bioretention]]
 
*[[Cost-benefit considerations for bioretention]]
 
*[[Cost-benefit considerations for bioretention]]
 +
*[[Calculating credits for bioretention]]
 
*[[Soil amendments to enhance phosphorus sorption]]
 
*[[Soil amendments to enhance phosphorus sorption]]
 +
*[[Summary of permit requirements for bioretention]]
 
*[[Supporting material for bioretention]]
 
*[[Supporting material for bioretention]]
 
*[[External resources for bioretention]]
 
*[[External resources for bioretention]]
 
*[[References for bioretention]]
 
*[[References for bioretention]]
*[[Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator]]
+
*[[Requirements, recommendations and information for using bioretention with no underdrain BMPs in the MIDS calculator]]
 +
*[[Requirements, recommendations and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
 +
 
 +
[[Category:Level 3 - Best management practices/Structural practices/Bioretention‏‎]]
 +
[[Category:Level 3 - Best management practices/Guidance and information/BMP overview]]
 
</noinclude>
 
</noinclude>
 
<noinclude>[[Category:BMP overview]]</noinclude>
 

Latest revision as of 19:25, 27 December 2022

image
photo of a rain garden
A rain garden in a residential development. Photo courtesy of Katherine Sullivan.

Bioretention is a terrestrial-based (up-land as opposed to wetland) water quality and water quantity control process. Bioretention employs a simplistic, site-integrated design that provides opportunity for runoff infiltration, filtration, storage, and water uptake by vegetation.

Bioretention areas are suitable stormwater treatment practices for all land uses, as long as the contributing drainage area is appropriate for the size of the facility. Common bioretention opportunities include landscaping islands, cul-de-sacs, parking lot margins, commercial setbacks, open space, rooftop drainage and street-scapes (i.e., between the curb and sidewalk). Bioretention, when designed with an underdrain and liner, is also a good design option for treating potential stormwater hotspots (PSHs). Bioretention is extremely versatile because of its ability to be incorporated into landscaped areas. The versatility of the practice also allows for bioretention areas to be frequently employed as stormwater retrofits.

Function within stormwater treatment train

Unlike end-of-pipe BMPs, bioretention facilities are typically shallow depressions located in upland areas of a treatment train. The strategic, uniform distribution of bioretention facilities across a development site results in smaller, more manageable subwatersheds, and thus, will help in controlling runoff close to the source where it is generated (Prince George’s County Bioretention Manual, 2002). Bioretention facilities are designed to function by essentially mimicking certain physical, chemical, and biological processes that occur in the natural environment. Depending upon the design of a facility, different processes can be maximized or minimized depending on the type of pollutant loading expected (Prince George’s County, 2002).

Green Infrastructure: bioretention facilities are designed to mimic a site's natural hydrology

MPCA permit applicability

One of the goals of this Manual is to facilitate understanding of and compliance with the MPCA Construction General Permit (CGP), which includes design and performance standards for permanent stormwater management systems. Standards for various categories of stormwater management practices must be applied in all projects in which at least one acre of new impervious area is being created.

For regulatory purposes, bioinfiltration practices fall under Infiltration systems described in the CGP. Biofiltration practices fall under Filtration systems of the permit. If used in combination with other practices, credit for combined stormwater treatment can be given. Due to the statewide prevalence of the MPCA permit, design guidance is presented with the assumption that the permit does apply. Also, although it is expected that in many cases the bioretention practice will be used in combination with other practices, standards are described for the case in which it is a stand-alone practice.

There are situations, particularly retrofit projects, in which a bioretention practice is constructed without being subject to the conditions of the MPCA permit. While compliance with the permit is not required in these cases, the standards it establishes can provide valuable design guidance to the user. It is also important to note that additional and potentially more stringent design requirements may apply for a particular bioretention practice, depending on where it is situated both jurisdictionally and within the surrounding landscape.

Retrofit suitability

The ability to use bioretention as a retrofit often depends on the age of development within a subwatershed. Subwatersheds that have been developed over the last few decades often present many bioretention opportunities because of open spaces created by modern setback, screening and landscaping requirements in local zoning and building codes. However, not every open area will be a good candidate for bioretention due to limitations associated with existing inverts of the storm drain system and the need to tie the underdrain from the bioretention area (for practices requiring an underdrain) into the storm drain system. In general, 4 to 6 feet of elevation above this invert or use of an upturned elbow is needed to drive stormwater through the proposed bioretention area.

Special receiving waters suitability

The table below provides guidance regarding the use of bioretention practices in areas upstream of special receiving waters. Note that the suitability of a bioretention practice depends on whether the practice has an underdrain (i.e. filtration vs. infiltration practice).

Infiltration and filtration bmp1 design restrictions for special waters and watersheds. See also Sensitive waters and other receiving waters.
Link to this table

BMP Group receiving water
A Lakes B Trout Waters C Drinking Water2 D Wetlands E Impaired Waters
Infiltration RECOMMENDED RECOMMENDED NOT RECOMMENDED if potential stormwater pollution sources evident RECOMMENDED RECOMMENDED unless target TMDL pollutant is a soluble nutrient or chloride
Filtration Some variations NOT RECOMMENDED due to poor phosphorus removal, combined with other treatments RECOMMENDED RECOMMENDED ACCEPTABLE RECOMMENDED for non-nutrient impairments

1Filtration practices include green roofs, bmps with an underdrain, or other practices that do not infiltrate water and rely primarily on filtration for treatment.
2 Applies to groundwater drinking water source areas only; use the lakes category to define BMP design restrictions for surface water drinking supplies


It is Highly Recommended that bioretention practices be designed offline. Offline facilities are defined by the flow path through the facility. Any facility that utilizes the same entrance and exit flow path upon reaching pooling capacity is considered an offline facility.

Cold climate suitability

Studies conducted since the 2008 version of this manual indicate the difference between summer and winter performance of bioretention systems is not substantial, even on sites with severe winters (Shanstrom, 2012; Davidson, et al., 2008; Dietz and Clausen, 2006; Kahn et al., 2012; LeFevre et al., 2009; Roseen et al., 2009; Toronto and Region Conservation (TRCA), 2008). Davidson et al. (2008) provide several recommendations for bioretention systems in cold climates. These recommendations are consistent with design recommendations in the Minnesota Stormwater Manual.

Water quantity treatment

High-flow bypass systems are utilized to safely discharge stormwater when bioretention cells fill and reach their maximum ponding depth. This will occur during storms exceeding the Water Quality Volume design storm. There are typically three types of high-flow bypass systems which are split into two categories: offline and online. Whenever possible, offline designs are preferable, as they reduce the potential for internal erosion in the bioretention cell. Offline facilities are defined by the flow path through the bioretention cell. Any facility that utilizes the same entrance and exit point upon reaching maximum ponding depth is considered an offline system. This is typically achieved with a curb cut set at the intended elevation of maximum ponding or through the use of some other upstream diversion, which results in flow bypass down the gutter when the cell has filled. This type of bypass is often simple to utilize in retrofit situations (commercial and transportation applications) where existing drainage infrastructure is present.

Where offline designs are not achievable, it is Highly Recommended that bioretention practices be designed to route high flows on the shortest flow path across the cell to avoid scour in the bioretention practice. The overflow location should be placed as close as practicable to the inlet(s). No matter the bypass design, energy dissipation should always be provided at the inlet(s) to avoid high flow velocity and associated turbulence that can re-suspended particulates and cause erosion in the bioretention cell.

Two types of online bypass systems may be used. The first option is to utilize an internal drainage inlet. Concrete box drop structures may be used to provide an overflow for bioretention cells; however, they should be located away from the inlet(s) to provide an elongated flow path and prevent short-circuiting. These internal drainage structures may be tied into the existing drainage infrastructure, which is an attractive benefit in commercial applications. When using these high-flow bypass devices, it is critical to set the brink-of-overflow elevation properly, otherwise the cell will not function properly when construction is complete. In a tree-shrub-mulch cell, the internal drainage inlets should have a system of screens to prevent loss of mulch. These overflow devices should be designed to safely pass the design discharge.

A second option is to use a broad crested or compound weir in the berm of the bioretention cell to convey overflow. This will typically be the best option in residential, institutional, and rural bioretention applications, where the overflow can tie in to an existing surface conveyance ( swale or ditch). Weir structures may be constructed of pressure-treated lumber, cast-in-place concrete, or precast concrete. The invert of the weir should be set at the intended brink-of-overflow elevation. This type of bypass structure should be designed to non-erosively bypass the design discharge.

In limited cases, a bioretention practice may be able to accommodate the channel protection volume, Vcp, in either an offline or online configuration, and in general they do provide some (albeit limited) storage volume. Bioretention can help reduce detention requirements for a site by providing elongated flow paths, longer times of concentration, and volumetric losses from infiltration and evapotranspiration. Experience and modeling analysis have shown that bioretention can be used for stormwater management quantity control when facilities are distributed throughout a site to reduce runoff and maintain the pre-existing time of concentration. This effort can be incorporated into the site hydrologic analysis. Generally, however, it is Highly Recommended that in order to meet site water quantity or peak discharge criteria, another structural control (e.g. detention) be used in conjunction with a bioretention area.

No matter the type of overflow device used, it is important that the designer provide non-erosive flow velocities at the outlet point to reduce downstream erosion. During the 10-year or 25-year storm (depending on local drainage criteria), discharge velocity should be kept below 4 feet per second for grassed channels. Erosion control matting or rock should be specified if higher velocities are expected.

Water quality treatment

Bioretention can be designed as an effective infiltration / recharge practice, particularly when parent soils have high permeability (> ~ 0.5 inches per hour). Where soils are not favorable, a rock infiltration gallery can be used to promote slow infiltration / recharge of stored water.

Bioretention is an excellent stormwater treatment practice due to the variety of pollutant removal mechanisms including vegetative filtering, settling, evaporation, infiltration, transpiration, biological and microbiological uptake, and soil adsorption. Pollutant removal and effluent concentration data for select parameters are provided in the two tables below.

Median pollutant removal percentages for several stormwater BMPs. Sources. More detailed information and ranges of values can be found in other locations in this manual, as indicated in the table. NSD - not sufficient data. NOTE: Some filtration bmps, such as biofiltration, provide some infiltration. The values for filtration practices in this table are for filtered water.
Link to this table

Practice TSS TP PP DP TN Metals1 Bacteria Hydrocarbons
Infiltration2 3 3 3 3 3 3 3 3
Biofiltration and Tree trench/tree box with underdrain 80 link to table link to table link to table 50 35 95 80
Sand filter 85 50 85 0 35 80 50 80
Iron enhanced sand filter 85 65 or 746 85 40 or 606 35 80 50 80
Dry swale (no check dams) 68 link to table link to table link to table 35 80 0 80
Wet swale (no check dams) 35 0 0 0 15 35 35 NSD
Constructed wet ponds4, 5 84 50 or 685 84 8 or 485 30 60 70 80
Constructed wetlands 73 38 69 0 30 60 70 80
Permeable pavement (with underdrain) 74 41 74 0 NSD NSD NSD NSD
Green roofs 85 0 0 0 NSD NSD NSD NSD
Vegetated (grass) filter 68 0 0 0 NSD NSD NSD NSD
Harvest and reuse Removal is 100% for captured water that is infiltrated. For water captured and routed to another practice, use the removal values for that practice.

TSS=Total suspended solids, TP=Total phosphorus, PP=Particulate phosphorus, DP=Dissolved phosphorus, TN=Total nitrogen
1Data for metals is based on the average of data for zinc and copper
2BMPs designed to infiltrate stormwater runoff, such as infiltration basin/trench, bioinfiltration, permeable pavement with no underdrain, tree trenches with no underdrain, and BMPs with raised underdrains.
3Pollutant removal is 100 percent for the volume infiltrated, 0 for water bypassing the BMP. For filtered water, see values for other BMPs in the table.
4Dry ponds do not receive credit for volume or pollutant removal
5Removal is for Design Level 2. If an iron-enhanced pond bench is included, an additional 40 percent credit is given for dissolved phosphorus. Use the lower values if no iron bench exists and the higher value if an iron bench exists.
6Lower values are for Tier 1 design. Higher values are for Tier 2 design.


Typical pollutant effluent concentrations, in milligrams per liter, for stormwater BMPs. Source (Winer, 2000)..
Link to this table

Practice TSS TP TN Cu Zn
Bioretention 11 0.3 1.11 0.007 0.040

1 Assumed values based on filtering practices


Early bioretention facilities were designed to provide water quality benefits by controlling the “first flush” event. Using highly permeable planting soils and an underdrain creates a high-rate biofilter, which can treat 90 to 95 percent (or higher) of the total annual volume of rainfall/runoff, depending on the design.

Limitations

Bioretention practices have been widely utilized for the past decade. Data suggests that these practices, when properly designed, constructed and maintained, perform well over long periods of time. However, design, construction and maintenance of these practices can be complex. In particular, maintenance personnel may need additional instruction on routine Operation and Maintenance requirements.

References

  • Davidson, J.D., M. Isensee, C. Coudron, T. Bistodeau, N.J. LeFevre, and G. Oberts. 2008. Recommendations to Optimize Hydrologic Bioretention Performance for Cold Climates. WERF Project 04-DEC-13SG.
  • Dietz, M.E. and Clausen, J.C. 2006. Saturation to improve pollutant retention in a rain garden. Environmental Science and Technology. Vol. 40. No. 4. pp. 1335-1340.
  • Kahn, U.T., C. Valeo, A. Chu, and B. van Duin. 2012. Bioretention cell efficacy in cold climates: Part 2 — water quality performance. Canadian Journal of Civil Engineering. 39(11):1222-1233.
  • LeFevre, N.J., J. D. Davidson, and G. L. Oberts. 2009. Bioretention of Simulated Snowmelt: Cold Climate Performance and Design Criteria. Proceedings of the 14th Conference on Cold Regions Engineering.
  • Roseen, R.M., Ballestro, T.P., Houle, J.J., Avelleneda, P., Briggs, J., Fowler, G., and Wildey, R. 2009. Seasonal Performance Variations for Storm-Water Management Systems in Cold Climate Conditions. Journal of Environmental Engineering. Vol. 135. No. 3. pp. 128-137.
  • Toronto and Region Conservation (TRCA). 2008. Performance Evaluation of Permeable Pavement and a Bioretention Swale, Seneca College, King City, Ontario. Prepared under the Sustainable Technologies Evaluation Program (STEP). Toronto, Ontario.


Related pages

This page was last edited on 27 December 2022, at 19:25.