Difference between revisions of "Pollutant concentrations for stormwater pond BMPs"
m |
m |
||
| Line 5: | Line 5: | ||
<tr> | <tr> | ||
<th width="25%">Practice</th> | <th width="25%">Practice</th> | ||
| − | <th width="15%>TSS Low-Med-High</th> | + | <th width="15%">TSS Low-Med-High</th> |
| − | <th width="15%>TP Low-Med-High</th> | + | <th width="15%">TP Low-Med-High</th> |
| − | <th width="15%>TN</th> | + | <th width="15%">TN</th> |
| − | <th width="15%>Cu</th> | + | <th width="15%">Cu</th> |
| − | <th width="15%>Zn</th> | + | <th width="15%">Zn</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Revision as of 22:38, 4 March 2013
Typical pollutant concentrations leaving stormwater pond BMPs. Concentrations are in milligrams per liter (ppm). Note that a range of values, from low to high, is provided for TSS and TP
Link to this table
| Practice | TSS Low-Med-High | TP Low-Med-High | TN | Cu | Zn |
|---|---|---|---|---|---|
| Stormwater Ponds | 10-19-30 | 0.10-0.17-0.25 | 1.3 | 0.005 | 0.030 |