m
m
 
(2 intermediate revisions by the same user not shown)
Line 22: Line 22:
 
*[[Sediment control practices - Stabilized earth/soil berm]]
 
*[[Sediment control practices - Stabilized earth/soil berm]]
 
*[[Sediment control practices - Buffer zones]]
 
*[[Sediment control practices - Buffer zones]]
 +
*[[Sediment control practices - Pavement sweeping]]
 +
*[[Construction stormwater practices - diversion and working in the dry]]
 
*[[Construction stormwater treatment - dewatering, including chemical treatment and sediment filtration]]
 
*[[Construction stormwater treatment - dewatering, including chemical treatment and sediment filtration]]
 
*[[Construction stormwater best management practice – buffer zones]] - Note this is a short fact sheet on the topic. For detailed information, see [[Sediment control practices - Buffer zones]]
 
*[[Construction stormwater best management practice – buffer zones]] - Note this is a short fact sheet on the topic. For detailed information, see [[Sediment control practices - Buffer zones]]
Line 48: Line 50:
 
==Permit applicability==
 
==Permit applicability==
 
{{alert|The Construction Stormwater General permit states "The Permittee(s) must stabilize all exposed soil areas (including stockpiles)." For more specific information, see [http://stormwater.pca.state.mn.us/index.php/IV._CONSTRUCTION_ACTIVITY_REQUIREMENTS#IV.B._EROSION_PREVENTION_PRACTICES Part IV.B.2] of the permit.|alert-danger}}
 
{{alert|The Construction Stormwater General permit states "The Permittee(s) must stabilize all exposed soil areas (including stockpiles)." For more specific information, see [http://stormwater.pca.state.mn.us/index.php/IV._CONSTRUCTION_ACTIVITY_REQUIREMENTS#IV.B._EROSION_PREVENTION_PRACTICES Part IV.B.2] of the permit.|alert-danger}}
 +
<noinclude>
 +
[[Category:Level 3 - Best management practices/Construction practices/Sediment control practices]]
 +
</noinclude>

Latest revision as of 13:08, 21 March 2023

photo of energy dissipation BMP
Energy dissipation using rock riprap.
photo of vehicle tracking pad
Properly constructed BMP for vehicle tracking.
image of inlet protection
Example of proper inlet protection.

Erosion is the process by which soil, rock, or other material is moved from one location to another, typically through the action of water or wind. Sediment control practices are designed to prevent or minimize loss of eroded soil at a site. Typical sediment control practices focus on the following.

  • Physical filtration of sediment by trapping soil particles as water passes through a silt fence, drop inlet screen, fiber roll, etc.
  • Settling processes, that allow sediment to fall out of flows that are slowed and temporarily impounded in ponds, traps, or in small pools created by berms, silt fencing, inlet protection dikes, check dams, and so on

This page provides links to several pages in this manual that address sediment control at construction stormwater sites, as well as links to other pages and information related to erosion prevention practices.

Acknowledgements

Sediment control practices

Photo galleries

Links

Permit applicability

Warning: The Construction Stormwater General permit states "The Permittee(s) must stabilize all exposed soil areas (including stockpiles)." For more specific information, see Part IV.B.2 of the permit.

This page was last edited on 21 March 2023, at 13:08.