Difference between revisions of "Step 4 Calibration Chart for auger or conveyor systems"
m |
m |
||
| Line 5: | Line 5: | ||
<tr> | <tr> | ||
<td colspan=6>Date: August 8, 2015</td> | <td colspan=6>Date: August 8, 2015</td> | ||
| + | </tr> | ||
| + | <tr> | ||
<td colspan=6>Spreader #: A4219</td> | <td colspan=6>Spreader #: A4219</td> | ||
| + | </tr> | ||
| + | <tr> | ||
<td colspan=6>Material: Rock salt</td> | <td colspan=6>Material: Rock salt</td> | ||
</tr> | </tr> | ||
Revision as of 13:37, 29 February 2016
Step 4 Calibration Chart for auger or conveyor systems
Link to this table
| Date: August 8, 2015 | |||||
| Spreader #: A4219 | |||||
| Material: Rock salt | |||||
| Setting | Pounds per minute | 5 mph (X12) | 10 mph (X6) | 15 mph (X4) | 20 mph (X3) |
|---|---|---|---|---|---|
| 1 | 10 | * 120 | 60 | 40 | 30 |
| **1.9 | 1.0 | 0.6 | 0.5 | ||
| 2 | 22 | 264 | 132 | 88 | 66 |
| 4.2 | 2.1 | 1.4 | 1.0 | ||
| 3 | 34 | 408 | 204 | 136 | 102 |
| 6.5 | 3.2 | 2.2 | 1.6 | ||
*top half of each row = lbs/lane mile. To get this number, multiply lbs/min by the factor shown for each speed
**bottom half of each row = lbs/1000 sq ft. To find this, divide the number in the top half by 63