(82 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{alert|This page is in edit and testing by the wiki authors. It is not a content page for the Manual. Information on this page may not be accurate and should not be used as guidance in managing stormwater.|alert-danger}}
+
[[File:Technical information page image.png|100px|right|alt=image]]
 +
[[File:Pdf image.png|100px|thumb|alt=pdf image|<font size=3>[https://stormwater.pca.state.mn.us/index.php?title=File:Operation_and_maintenance_(O%26M)_of_swales_-_Minnesota_Stormwater_Manual2.pdf Download pdf]</font size>]]
 +
[[File:Swale at Lino Lakes city hall.jpg|300px|thumb|alt=Image of a swale|<font size=3>Image of a swale at Lino Lakes city hall</font size>]]
  
==Overview of Typical O&M Issues==
+
{{alert|Swales can be an important tool for retention and detention of stormwater runoff. Because they utilize vegetation, swales provide additional benefits, including cleaner air, carbon sequestration, improved biological habitat, and aesthetic value.|alert-success}}
A grass or dry swale is a general term for filtration or infiltration conveyance practice, but there are a wide variety of designs depending on the site requirements. The key functions of swales are to convey water with reduced peak velocities and to perform water quality treatment with filtration and infiltration. Swales have the benefit of providing ecological function in areas dominated by development and impervious surface. These practices are ideal for urban settings, which creates an opportunity for humans to impact their function through vandalism, littering, and vehicular traffic.  
 
  
These practices, like other green stormwater infrastructure, require regular maintenance to ensure proper and long-lasting ecosystem and stormwater function. If properly maintained, swales can operate effectively for 20-50 years, depending on the design type. Vegetated dry swales may perform properly for up to 50 years (Malvern Borough, 2013). The most frequently cited O&M concerns for swales include: *
+
This page provides guidance for operation and maintenance (O&M) of <span title="Are configured as shallow, linear channels. They typically have vegetative cover such as turf or native perennial grasses"> [https://stormwater.pca.state.mn.us/index.php?title=Dry_swale_(Grass_swale) '''swales''']</span>. This includes <span title="Dry swales, sometimes called grass swales, are similar to bioretention cells but are configured as shallow, linear channels. They typically have vegetative cover such as turf or native perennial grasses. Dry swales may be constructed as filtration or infiltration practices, depending on soils."> [https://stormwater.pca.state.mn.us/index.php?title=Dry_swale_(Grass_swale) '''dry swales''']</span>, <span title="Wet swales occur when the water table is located very close to the surface or water does not readily drain out of the swale. A wet swale acts as a very long and linear shallow biofiltration or linear wetland treatment system."> [https://stormwater.pca.state.mn.us/index.php?title=Wet_swale_(wetland_channel) '''wet swales''']</span>, <span title="Bioswales are landscape elements designed to concentrate or remove debris and pollution out of surface runoff water. They consist of a swaled drainage course with gently sloped sides (less than 6%) and filled with vegetation, compost and/or riprap.> '''bioswales'''</span>, and high gradient <span title="A step pool is a designed feature that is intended to reduce, treat, and, in some cases, infiltrate higher velocity stormwater.">'''step pools'''</span>.
*Standing water in the swale after a 48 hour timeline to infiltrate runoff.
+
 
*Loss of volume storage due to accumulated sediment.
+
Supplemental information can be found on the page called [[Operation and maintenance of swales - supplemental information]]. Supplemental information includes the following.
*Clogged soil media.
+
*<span title="Infiltration Best Management Practices (BMPs) treat urban stormwater runoff as it flows through a filtering medium and into underlying soil, where it may eventually percolate into groundwater. The filtering media is typically coarse-textured and may contain organic material, as in the case of bioinfiltration BMPs."> [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_infiltration_Best_Management_Practices '''Infiltration''']</span> rate service life before clogging
*Clogged inlet and outlet structures, or underdrains.
+
*Nitrogen reduction
*Growth and proliferation of weeds or other non-native species that threaten the long-term effectiveness of the swale.
+
*Phosphorus reduction
 +
*Heavy metals retention
 +
*<span title="Practices designed to prevent or minimize erosion> [https://stormwater.pca.state.mn.us/index.php?title=Erosion_prevention_practices '''Erosion protection''']</span>
 +
*Sediment monitoring, removal, and disposal
 +
*Seeding, planting, and landscaping maintenance
 +
*Snow and salt considerations
 +
*Maintenance agreements
 +
*References
 +
 
 +
==Overview of typical O&M issues==
 +
A grass or dry swale is a general term for <span title="Filtration Best Management Practices (BMPs) treat urban stormwater runoff as it flows through a filtering medium, such as sand or an organic material. They are generally used on small drainage areas (5 acres or less) and are primarily designed for pollutant removal. They are effective at removing total suspended solids (TSS), particulate phosphorus, metals, and most organics. They are less effective for soluble pollutants such as dissolved phosphorus, chloride, and nitrate."> [https://stormwater.pca.state.mn.us/index.php?title=Filtration '''filtration''']</span> or <span title="Infiltration Best Management Practices (BMPs) treat urban stormwater runoff as it flows through a filtering medium and into underlying soil, where it may eventually percolate into groundwater. The filtering media is typically coarse-textured and may contain organic material, as in the case of bioinfiltration BMPs."> [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_infiltration_Best_Management_Practices '''infiltration''']</span> conveyance practice, but there are a wide variety of designs depending on the site requirements. The key functions of swales are to convey water with reduced peak velocities and to perform water quality treatment with filtration and infiltration. Swales have the benefit of providing ecological function in areas dominated by development and impervious surface. These practices are ideal for urban settings, which creates an opportunity for humans to impact their function through vandalism, littering, and vehicular traffic.
 +
 
 +
These practices, like other <span title="Green stormwater infrastructure (GSI) describes practices that use natural systems (or engineered systems that mimic or use natural processes) to capture, clean, and infiltrate stormwater; shade and cool surfaces and buildings; reduce flooding, create wildlife habitat; and provide other services that improve environmental quality and communities’ quality of life. (City of Tucson)"> '''green stormwater infrastructure'''</span>, require regular maintenance to ensure proper and long-lasting ecosystem and stormwater function. If properly maintained, swales can operate effectively for 20-50 years, depending on the design type. Vegetated dry swales may perform properly for up to 50 years ([http://www.malvern.org/wp-content/uploads/2013/03/vegswale.pdf Malvern Borough], 2013). The most frequently cited O&M concerns for swales include the following.
 +
*Standing water in the swale after a 48 hour timeline to infiltrate runoff
 +
*Loss of volume storage due to accumulated sediment
 +
*Clogged soil <span title="Engineered media is a mixture of sand, fines (silt, clay), and organic matter utilized in stormwater practices, most frequently in bioretention practices. The media is typically designed to have a rapid infiltration rate, attenuate pollutants, and allow for plant growth."> [https://stormwater.pca.state.mn.us/index.php?title=Design_criteria_for_bioretention#Materials_specifications_-_filter_media '''media''']</span>
 +
*Clogged inlet and outlet structures, or <span title="An underground drain or trench with openings through which the water may percolate from the soil or ground above"> '''underdrains'''</span>
 +
*Growth and proliferation of weeds or other non-<span title="A species that has been observed in the form of a naturally occurring and self-sustaining population in historical times. Non-natives do not meet this definition."> '''native species'''</span> that threaten the long-term effectiveness of the swale
  
 
The sections below describe best practices to prevent or minimize these common problems.
 
The sections below describe best practices to prevent or minimize these common problems.
==Design Phase O&M Considerations==
+
 
Swales, like other infiltration practices in urban areas, may be subject to higher public visibility, greater trash loads, pedestrian traffic, vandalism, and vehicular loads. Designers should design these practices in ways that prevent or minimize O&M issues. Examples include:
+
==Design phase O&M considerations==
*Designing easy-access points for maintenance personnel and equipment.
+
[[File:Filter strip for bioswale.jpg|300px|thumb|alt=photo pretreatment filter strip|<font size=3>Pretreatment filter strip for a bioswale.</font size>]]
*Limiting the contributing drainage area and sizing the practice in accordance to its contributing drainage area.
+
 
*Adding pre-treatment and trash racks to reduce sediment and debris loads.
+
Swales, like other infiltration practices in urban areas, may be subject to higher public visibility, greater trash loads, pedestrian traffic, vandalism, and vehicular loads. Designers should design these practices in ways that prevent or minimize O&M issues. Examples include the following.
*Providing a vegetation design plan, emphasizing the following considerations:
+
*Designing easy-access points for maintenance personnel and equipment
**Utilizing native plantings that enhance pollinator and wildlife habitat, improve infiltration and evapotranspiration, reduce urban heat island effect, provide optimized carbon sequestration, and provide climate adaptation. Native plantings typically require less maintenance and replacement than non-native plantings because they are adapted to the local climate (see Plants for Stormwater Design).
+
*Limiting the <span title="The total drainage area, including pervious and impervious surfaces, contributing to a BMP"> '''[https://stormwater.pca.state.mn.us/index.php?title=Contributing_drainage_area_to_stormwater_BMPs contributing drainage area]'''</span> and sizing the practice in accordance to its contributing drainage area
 +
*Adding <span title="Pretreatment reduces maintenance and prolongs the lifespan of structural stormwater BMPs by removing trash, debris, organic materials, coarse sediments, and associated pollutants prior to entering structural stormwater BMPs. Implementing pretreatment devices also improves aesthetics by capturing debris in focused or hidden areas. Pretreatment practices include settling devices, screens, and pretreatment vegetated filter strips."> [https://stormwater.pca.state.mn.us/index.php?title=Pretreatment '''pretreatment''']</span> and <span title="A sturdy cage-like stormwater filtration structure that keeps large debris and trash out of stormwater systems and waterways."> '''trash racks'''</span> to reduce sediment and debris loads.
 +
*Providing a vegetation design plan, emphasizing the following considerations
 +
**Utilizing native plantings that enhance pollinator and wildlife habitat, improve infiltration and <span title="Practices designed to prevent or minimize erosion> [https://stormwater.pca.state.mn.us/index.php?title=Erosion_prevention_practices '''erosion protection''']</span>
 +
*<span title="Loss of water to the atmosphere as a result of the joint processes of evaporation and transpiration through vegetation"> '''Evapotranspiration'''</span>, reduce urban <span title="an urban area having higher average temperature than its rural surroundings owing to the greater absorption, retention, and generation of heat by its buildings, pavements, and human activities."> '''heat island'''</span> effect, provide optimized <span title="The process of capturing and storing atmospheric carbon dioxide.> '''carbon sequestration'''</span>, and provide climate adaptation. Native plantings typically require less maintenance and replacement than non-native plantings because they are adapted to the local climate ([https://stormwater.pca.state.mn.us/index.php?title=Minnesota_plant_lists see Plants for Stormwater Design]).
 
**Site-specific plantings that take into account sun exposure, shade, proximity to traffic corners (visibility issues), interior vs exterior plantings, salt-tolerant plants, etc. The selection of plantings suitable to their immediate surroundings will minimize long-term care and replacement frequency.  
 
**Site-specific plantings that take into account sun exposure, shade, proximity to traffic corners (visibility issues), interior vs exterior plantings, salt-tolerant plants, etc. The selection of plantings suitable to their immediate surroundings will minimize long-term care and replacement frequency.  
*Providing educational signage for swales in residential areas to increase public awareness.
+
*Providing educational signage for swales in residential areas to increase public awareness
  
Designers should consult and include any local requirements regarding green infrastructure. O&M considerations often depend on whether the practice is located on public land, private land, or in the public right of way. For example, plantings in the public right of way that conflict with any traffic safety considerations could require increased O&M, such as pruning or complete removal. Swales are particularly subject to traffic considerations and regulations, given their frequent placement in public right-of-way.  
+
Designers should consult and include any local requirements regarding <span title="Green stormwater infrastructure is designed to mimic nature and capture rainwater where it falls. Green infrastructure reduces and treats stormwater at its source while while also providing multiple community benefits such as improvements in water quality, reduced flooding, habitat, carbon capture, etc."> '''green infrastructure'''</span>. O&M considerations often depend on whether the practice is located on public land, private land, or in the public right of way. For example, plantings in the public right of way that conflict with any traffic safety considerations could require increased O&M, such as pruning or complete removal. Swales are particularly subject to traffic considerations and regulations, given their frequent placement in public right-of-way.  
  
The designer should also provide a site-specific O&M plan that includes the following:
+
The designer should also provide a site-specific O&M plan that includes the following.
 
*Construction inspection schedule and checklists
 
*Construction inspection schedule and checklists
 
*Post-construction routine maintenance schedule and checklists
 
*Post-construction routine maintenance schedule and checklists
 
*Operating instructions for the practice (if applicable)
 
*Operating instructions for the practice (if applicable)
  
For more information on [https://stormwater.pca.state.mn.us/index.php?title=Design_criteria_for_dry_swale_(grass_swale) '''design criteria for dry swale (grass swales)''']</span>.
+
For more information on [https://stormwater.pca.state.mn.us/index.php?title=Design_criteria_for_dry_swale_(grass_swale) design criteria for dry swale (grass swales)]</span>.
 +
 
 +
==Construction phase O&M considerations==
 +
[[File:MPD Infiltrometer image.jpg|300px|thumb|alt=image of MPD infiltrometer|<font size=3>The modified Philip-Dunne infiltrometer, as well as other direct infiltration measurements such as double ring infiltrometers, are preferred methods for measuring infiltration rates, compared to soil borings and pits. Image: [http://stormwaterbook.safl.umn.edu/water-budget-measurement/infiltration University of Minnesota, St. Anthony Falls Laboratory]</font size>.]]
  
==Construction Phase O&M Considerations==
+
Proper construction methods and sequencing play a significant role in reducing O&M problems. Some key items during the construction phase include the following.
Proper construction methods and sequencing play a significant role in reducing O&M problems. Some key items during the construction phase include:
+
*'''Before construction begins'''
*Before construction begins:
+
**Install <span title="Practices designed to prevent or minimize erosion> [https://stormwater.pca.state.mn.us/index.php?title=Erosion_prevention_practices '''erosion control''']</span> prior to excavation of swale
**Install erosion control prior to excavation of swale.
 
 
**Hold a pre-construction meeting to review the construction plans and the sequencing of construction
 
**Hold a pre-construction meeting to review the construction plans and the sequencing of construction
**Designate a stormwater supervisor to make sure someone is responsible for erosion and sediment control.
+
**Designate a stormwater supervisor to make sure someone is responsible for erosion and <span title="practices designed to prevent or minimize loss of eroded soil at a site"> [https://stormwater.pca.state.mn.us/index.php?title=Sediment_control_practices '''sediment control''']</span>.
*During construction:
+
*'''During construction'''
**Construct any pre-treatment devices first to trap sediments.
+
**Construct any <span title="Pretreatment reduces maintenance and prolongs the lifespan of structural stormwater BMPs by removing trash, debris, organic materials, coarse sediments, and associated pollutants prior to entering structural stormwater BMPs. Implementing pretreatment devices also improves aesthetics by capturing debris in focused or hidden areas. Pretreatment practices include settling devices, screens, and pretreatment vegetated filter strips."> [https://stormwater.pca.state.mn.us/index.php?title=Pretreatment '''pretreatment''']</span> devices first to trap sediments.
 
**Ensure heavy equipment does not enter the footprint of the practice to avoid compaction of the growth medium
 
**Ensure heavy equipment does not enter the footprint of the practice to avoid compaction of the growth medium
**Ensure the correct plant species are being installed by having a detailed list of species and quantities. These should be spelled out in the plan set both in the Details and Specifications and on actual drawings. A copy should be kept on one’s person at all times during construction.
+
**Ensure the correct plant species are being installed by having a detailed list of species and quantities. These should be spelled out in the plan set both in the ''Details and Specifications'' and on actual drawings. A copy should be kept on one’s person at all times during construction.
 
**Inspect the practice during construction to ensure that the swale is built in accordance with the approved design and standards and specifications. Use a detailed inspection checklists that include sign-offs by qualified individuals at critical stages of construction, to ensure that the contractor’s interpretation of the plan is acceptable to the professional designer.
 
**Inspect the practice during construction to ensure that the swale is built in accordance with the approved design and standards and specifications. Use a detailed inspection checklists that include sign-offs by qualified individuals at critical stages of construction, to ensure that the contractor’s interpretation of the plan is acceptable to the professional designer.
**Conduct soil infiltration tests to ensure proper soil compaction.
+
**Conduct [https://stormwater.pca.state.mn.us/index.php?title=Determining_soil_infiltration_rates soil infiltration tests] to ensure proper <span title="The compression of soil particles into a smaller volume, which reduces the size of pore space available for air and water."> '''soil compaction'''</span>
*After construction:
+
*'''After construction'''
**Verify that the swale was built in accordance with the approved design and standards and specifications.
+
**Verify that the swale was built in accordance with the approved design and standards and specifications
 
**Verify that the practice properly conveys, filters, and/or infiltrates runoff. Ensure that no standing water remains within the swale 48 hours after precipitation.  
 
**Verify that the practice properly conveys, filters, and/or infiltrates runoff. Ensure that no standing water remains within the swale 48 hours after precipitation.  
**Verify that pretreatment functions properly.
+
**Verify that pretreatment functions properly
**Use a detailed inspection checklists that include sign-offs by qualified individuals at the completion of construction, to ensure that the contractor’s interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided here.
+
**Use a detailed inspection checklists that include sign-offs by qualified individuals at the completion of construction, to ensure that the contractor’s interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist [https://stormwater.pca.state.mn.us/index.php?title=Operation_and_maintenance_(O%26M)_of_swales#Useful_resources is provided here].
 
**Review and discuss the plant warranty/establishment period with the plant provider to understand the conditions under which failing plants will be replaced. Divert stormwater away from BMP during establishment phase as necessary for the selected vegetation.  
 
**Review and discuss the plant warranty/establishment period with the plant provider to understand the conditions under which failing plants will be replaced. Divert stormwater away from BMP during establishment phase as necessary for the selected vegetation.  
**Determine if stormwater should be kept offline from the practice until the seedlings are established.
+
**Determine if stormwater should be kept <span title="A stormwater system in which part or all of the stormwater runoff is diverted from the primary treatment practice. Partial diversion is employed for bypass runoff, which is runoff in excess of the designed treatment volume of the practice. Full offline diversion is employed as a temporary means to divert all runoff from a stormwater practice, typically to avoid erosion of exposed soil or establishment of vegetation."> '''offline'''</span> from the practice until the seedlings are established.
**The design/construction team should provide the O&M team with the following information to be included in the O&M plan:
+
**The design/construction team should provide the O&M team with the following information to be included in the O&M plan.
 
***The plant warranty.
 
***The plant warranty.
***The “as-built” plans of the practice.
+
***The <span title="As-built refers to a drawing that shows the existing dimensions and conditions of a stormwater structure or device."> '''as-built'''</span> plans of the practice.
 
***A list of conditions that might cause failure of the practice if not properly maintained.
 
***A list of conditions that might cause failure of the practice if not properly maintained.
  
==Post-Construction Phase O&M==
+
==Post-construction phase O&M==
  
Effective short and long-term performance of grass swales requires a dedicated and routine maintenance plan with clear guidelines, expectations, and schedules. Proper maintenance will not only increase the effectiveness of the swale at treating stormwater runoff, but will create a viable green space supporting ecological function. A maintenance plan clarifying maintenance responsibilities should be required for all practices.
+
Effective short and long-term performance of grass swales requires a dedicated and routine maintenance plan with clear guidelines, expectations, and schedules. Proper maintenance will not only increase the effectiveness of the swale at treating stormwater runoff, but will create a viable green space supporting <span title="Benefits derived from ecosystems and ecosystem functions. Examples of benefits include clean water, nutrient cycling, pollination, and detoxification of wastes."> '''ecological function'''</span>. A maintenance plan clarifying maintenance responsibilities should be required for all practices.
  
 
Some important post-construction considerations are provided below along with recommended maintenance standards.  
 
Some important post-construction considerations are provided below along with recommended maintenance standards.  
*A site-specific O&M plan should be prepared by the designer prior to completing construction of the grass swale. This plan should provide any operating procedures related to the practices. The plan should also provide clear maintenance expectations, activities, and schedules, including minimum maintenance frequencies expected. Include photos if possible. Be clear about who is responsible for the maintenance and the type of expertise that will be needed for distinct O&M activities. The O&M plan should include an anticipated budget for O&M activities. The O&M plan should also include an example O&M inspection checklist and an example maintenance report. Example O&M plans and inspection checklists are provided further down below.  
+
*A site-specific O&M plan should be prepared by the designer prior to completing construction of the grass swale. This plan should provide any operating procedures related to the practices. The plan should also provide clear maintenance expectations, activities, and schedules, including minimum maintenance frequencies expected. Include photos if possible. Be clear about who is responsible for the maintenance and the type of expertise that will be needed for distinct O&M activities. The O&M plan should include an anticipated budget for O&M activities. The O&M plan should also include an example O&M inspection checklist and an example maintenance report. Example O&M plans and inspection checklists [https://stormwater.pca.state.mn.us/index.php?title=Operation_and_maintenance_(O%26M)_of_swales#Useful_resources are provided further down below].  
*A legally binding and enforceable maintenance agreement should be executed between the practice owner and the local review authority.
+
*A legally binding and enforceable maintenance agreement should be executed between the practice owner and the local review authority. [https://stormwater.pca.state.mn.us/index.php?title=Operation_and_maintenance_(O%26M)_of_swales#Maintenance_training_documents_and_videos Link here for example maintenance agreements].
 
*Inspection and maintenance activities are distinct and can be done as separate activities or together. Inspection will typically assess the practice for any O&M issues, whereas maintenance will address the O&M issues identified by the inspection. A dedicated inspection effort on a large number of BMPs can help prioritize maintenance activities.  
 
*Inspection and maintenance activities are distinct and can be done as separate activities or together. Inspection will typically assess the practice for any O&M issues, whereas maintenance will address the O&M issues identified by the inspection. A dedicated inspection effort on a large number of BMPs can help prioritize maintenance activities.  
 
*Maintenance activities should be careful not to cause compaction.
 
*Maintenance activities should be careful not to cause compaction.
*Ponding water that does not infiltrate within 48 hours of a storm is an indicator the swale is not functioning properly. If ponded water is observed outside of a routine O&M schedule it should be addressed immediately.
+
*Ponded water that does not infiltrate within 48 hours of a storm is an indicator the swale is not functioning properly. If ponded water is observed outside of a routine O&M schedule it should be addressed immediately.
*BMP areas generally should not be used as dedicated snow storage areas. Snow storage within swales should be avoided when possible, such as in parking lots. Snow storage can cause compaction and increase sedimentation within the swale over time, and so snow storage on swales designed for infiltration should be specifically avoided. Click here for additional snow and salt considerations.
+
*<span title="One of many different structural or non–structural methods used to treat runoff"> '''Best management practice'''</span> (BMP) areas generally should not be used as dedicated snow storage areas. Snow storage within swales should be avoided when possible, such as in parking lots. Snow storage can cause compaction and increase sedimentation within the swale over time, and so snow storage on swales designed for infiltration should be specifically avoided. [https://stormwater.pca.state.mn.us/index.php?title=Operation_and_maintenance_of_swales_-_supplemental_information#Snow_and_salt_considerations Link here for more information].
 
 
The table below provides an overview and schedule of general maintenance activities.
 
 
 
<table>
 
<tr>
 
<th colspan=5>First Year of Operation
 
</tr>
 
 
 
<tr>
 
<th>Activity
 
<th>Frequency
 
<th>Time Period
 
<th>Level of Effort
 
<th>O&M Benefit*
 
</tr>
 
 
 
<tr>
 
<td>Check that there is no ponding
 
<td>48 hours after event
 
<td>All year long
 
<td>1 hour
 
<td>1
 
</tr>
 
 
 
<tr>
 
<td>Inspect entire BMP after rainfall
 
<td>After any event greater than 0.5”
 
<td>All year long (or during area’s rain season)
 
<td>2-4 hours
 
<td>1
 
</tr>
 
 
 
<tr>
 
<td>Correct earthwork if inlet scouring or unwanted flow paths develop
 
<td>As needed
 
<td>All year long
 
<td>>4 hours
 
<td>1
 
</tr>
 
 
 
<tr>
 
<td>Spot reseed bare patches and eroding areas
 
<td>As needed
 
<td>First growing season
 
<td>2-4 hours
 
<td>3,4,5
 
</tr>
 
 
 
<tr>
 
<td>Supplemental watering during drier periods, particularly if keeping stormwater offline until plant seedlings are established.
 
<td>As needed
 
<td>Dry periods
 
<td>1-2 hours
 
<td>3,4,5
 
</tr>
 
 
 
<tr>
 
<td>Remove any stormwater diversion or barriers once seedlings are established.  
 
<td>Once
 
<td>When plants are sufficiently established
 
<td>1-2 hours
 
<td>1,2,3,4,5
 
</tr>
 
 
 
<tr>
 
<td>Inspect and remove invasive plants and weeds during plant community establishment
 
<td>Monthly
 
<td>First growing season
 
<td>1-2 hours
 
<td>5,6
 
</tr>
 
 
 
<tr>
 
<td>Mowing (dry swales) side slopes and/or grass filter strip to maintain 4-12” of height
 
<td>Seasonally
 
<td>As needed (do not interrupt any vegetative establishment)
 
<td>2-4 hours
 
<td>1
 
</tr>
 
 
 
<tr>
 
<th colspan=5>After First Year of Operation
 
</tr>
 
 
 
<tr>
 
<th>Activity
 
<th>Frequency
 
<th>Time Period
 
<th>Level of Effort
 
<th>O&M Benefit*
 
</tr>
 
 
 
<tr>
 
<td>Check that there is no ponding
 
<td>48 hours after event
 
<td>All year long
 
<td>1 hour
 
<td>1
 
</tr>
 
 
 
<tr>
 
<td>Inspect inlet/outlet structures for structural damage and clogging.  
 
<td>Annually
 
<td>All year long
 
<td>1-2 hours
 
<td>1
 
</tr>
 
 
 
<tr>
 
<td>Correct earthwork if inlet scouring or unwanted flow paths develop
 
<td>As needed
 
<td>All year long
 
<td>>4 hours
 
<td>1
 
</tr>
 
 
 
<tr>
 
<td>Mowing (dry swales) side slopes and/or grass filter to maintain 4-12” of height
 
<td>Seasonally
 
<td>All year long
 
<td>2-4 hours
 
<td>1
 
</tr>
 
  
<tr>
+
{{:Overview and schedule of general maintenance activities for swales}}
<td>Inspect for trash and debris
 
<td>Seasonally
 
<td>All year long
 
<td>2-4 hours
 
<td>1,5
 
</tr>
 
  
<tr>
 
<td>Check for evidence of clogging in the pre-treatment device and/or in the main treatment area.
 
<td>Biannually
 
<td>In spring and fall
 
<td>1-2 hours
 
<td>1
 
</tr>
 
  
<tr>
+
{{: Common problems and how to troubleshoot them for swales}}
<td>Inspect and remove excess sediment in the pre-treatment device and/or in the main treatment area.
 
<td>Annually
 
<td>In spring (post- snowmelt) and fall
 
<td>4 hours if removal is needed
 
<td>1
 
</tr>
 
  
<tr>
+
==Maintenance costs==
<td>Inspect plant composition and health and replace as needed (maintain >95% vegetative cover)
+
Maintenance costs will vary on a number of factors, including but not limited to the following.
<td>Biannually
+
*Size of the practice and its contributing drainage area
<td>In fall or spring
+
*Type of plantings used
<td>4 hours if plant replacement is needed
+
*Site visit frequency
<td>4,5
+
*Level of maintenance needed
</tr>
+
*Local weather conditions
 +
*Staffing needs (number of staff, external vs. internal staff, etc)
 +
*Travel time between sites
 +
*Efficiencies of scale (single GI vs. a cluster of GI)
 +
*Equipment needed
  
<tr>
+
Maintenance costs will vary depending on the size of the practice, its contributing drainage area, type of plantings, and whether it is part of a larger green infrastructure effort. Preventative maintenance is key to minimizing major costs associated with repairs. A general rule of thumb to estimate annual maintenance costs is 5%-7% of the installation costs for swales ([http://www.malvern.org/wp-content/uploads/2013/03/vegswale.pdf CWP, 2017]). In 2014 dollars, the annual cost of maintenance is approximately $0.06-$0.12 per square foot of practice, which adjusts to $0.07-$0.14 in 2021 dollars, as estimated in the National Stormwater Calculator ([https://owl.cwp.org/mdocs-posts/cost-of-maintaining-green-infrastructure/ Clary, 2017]). Maintenance may be higher the first few years, while plants are being established.
<td>Prune and weed to maintain appearance and proper vegetative cover
 
<td>As needed
 
<td>Growing season
 
<td>1-2 hours
 
<td>4,5,6,
 
</tr>
 
  
<tr>
+
Maintenance costs should account for the number of hours of labor, the cost for different types of labor expertise required, and any equipment needed to successfully complete the maintenance activities.
<th colspan=5>After 5+ Years of Operation (non-routine maintenance)
 
</tr>
 
  
<tr>
+
==Useful resources==
<th>Activity
 
<th>Frequency
 
<th>Time Period
 
<th>Level of Effort per Visit
 
<th>O&M Benefit*
 
</tr>
 
  
<tr>
+
===Additional detailed O&M information===
<td>After long term operation of the practice, some occasional and infrequent maintenance activities might be required, such as bigger repairs, soil regeneration, or redesign of key elements of the practice.  
+
More detailed information regarding specific maintenance activities [https://stormwater.pca.state.mn.us/index.php?title=Operation_and_maintenance_of_swales_-_supplemental_information#Erosion_protection_and_sediment_monitoring.2C_removal.2C_and_disposal are provided here].  
<td>As needed
+
Topics discussed include
<td>As needed
+
*sustainable service life for infiltration and bioretention BMPs;
<td>Could be significant depending on the activity
+
*erosion protection and sediment monitoring, removal, and disposal;
<td>1,2,3,4,5,6
+
*seeding, planting, and landscaping maintenance;
</tr>
+
*snow and salt considerations;
 +
*maintenance agreements; and
 +
*aditional References.
  
<tr>
+
===Case studies===
<td colspan=5>Key to Maintenance Benefits:
+
*[https://www.pca.state.mn.us/sites/default/files/wq-strm4-16.pdf Grass Swales: Gauging Their Ability to Remove Pollutants From Highway Stormwater Runoff]</span> - Wisconsin DOT, 2007.
*Proper stormwater flow and infiltration
 
*Creation and maintenance of wildlife habitat
 
*Creation and maintenance of pollinator habitat
 
*Nutrient cycling and storage
 
*Aesthetics and public enjoyment
 
*Carbon sequestration
 
</tr>
 
  
</table>
+
===Maintenance training documents and videos===
 +
*[https://www.bae.ncsu.edu/workshops-conferences/stormwater-bmp/ Training and certification]</span> programs on designing, installing, and maintaining stormwater BMPs.
  
<table>
+
{{:Example O&M plans, checklists, reports, and maintenance agreements for swales}}
<tr>
 
<th colspan=3>Troubleshooting Common Problems
 
</tr>
 
  
<tr>
+
==References==
<th>Symptom
+
*Malvern Borough. 2013. [http://www.malvern.org/wp-content/uploads/2013/03/vegswale.pdf Vegetated Swales].
<th>Possible Causes
+
*Clary, J., Piza, H. 2017. [https://owl.cwp.org/mdocs-posts/cost-of-maintaining-green-infrastructure/ Cost of Maintaining Green Infrastructure]. American Society of Civil Engineers (ASCE), Reston, VA.
<th>Solution
 
</tr>
 
  
<tr>
+
<noinclude>
<td>Standing water within the swale for more than 48 hours
+
==Related pages==
<td>Soil media may be clogged with accumulated sediment or the outlet structures may be clogged with trash or de
+
*[[Terminology for swales|Terminology for swales (grass channels)]]
<td>*Scrape, clean or vacuum the infiltration area. A vacuum truck may be needed for sediment removal in the pretreatment area or BMP proper. All sediments may be subjected to the MPCA’s guidance for reuse and disposal
+
*[[Overview for dry swale (grass swale)]]
*Remove any trash or debris.
+
*[[BMPs for stormwater infiltration|Types of infiltration]]
</tr>
+
*[[BMPs for stormwater filtration|Types of filtration]]
 +
*[[Design criteria for dry swale (grass swale)]]
 +
*[[Construction specifications for dry swale (grass swale)]]
 +
*[[Operation and maintenance of dry swale (grass swale)]]
 +
*[[Assessing the performance of dry swale (grass swale)]]
 +
*[[Calculating credits for dry swale (grass swale)]]
 +
*[[Cost considerations for dry swale (grass swale)]]
 +
*[[Case studies for dry swale (grass swale)]]
 +
*[[Plants for swales]]
 +
*[[Check dams for stormwater swales]]
 +
*[[External resources for swales|External resources for dry swale (grass swale)]]
 +
*[[References for dry swale (grass swale)]]
 +
*[https://stormwater.pca.state.mn.us/index.php?title=Requirements,_recommendations_and_information_for_using_swale_without_an_underdrain_as_a_BMP_in_the_MIDS_calculator Requirements, recommendations and information for using dry swale (grass swale) without an underdrain in the MIDS calculator]
 +
*[https://stormwater.pca.state.mn.us/index.php?title=Requirements,_recommendations_and_information_for_using_swale_with_an_underdrain_as_a_BMP_in_the_MIDS_calculator Requirements, recommendations and information for using dry swale (grass swale) with an underdrain in the MIDS calculator]
 +
*[[Requirements, recommendations and information for using swale side slope as a BMP in the MIDS calculator]]
 +
*[[Dry swale (grass swale) and interesting websites]]
 +
===Green Infrastructure===
 +
*[[Green Stormwater Infrastructure (GSI) and sustainable stormwater management]]
 +
*Operation and maintenance of green infrastructure practices
 +
**[[Operation and maintenance of bioretention and other stormwater infiltration practices]]
 +
**[[Operation and maintenance of bioretention and other stormwater infiltration practices - supplemental information]]
 +
**[[Operation and maintenance (O&M) of tree trenches and tree boxes]]
 +
**[[Operation and maintenance of tree trenches and tree boxes - supplemental information]]
 +
**[[Operation and maintenance (O&M) of green roofs]]
 +
**[[Operation and maintenance of green roofs - supplemental information]]
 +
**[[Operation and maintenance (O&M) of swales]]
 +
**[[Operation and maintenance of swales - supplemental information]]
 +
**[[Operation and maintenance (O&M) of filter strips]]
 +
**[[Operation and maintenance of filter strips - supplemental information]]
 +
**[[Operation and maintenance (O&M) of stormwater and rainwater harvest and use/reuse practices]]
 +
**[[Operation and maintenance (O&M) of stormwater and rainwater harvest and use/reuse practices - supplemental information]]
 +
**[[Operation and maintenance (O&M) of stormwater treatment wetland practices]]
 +
**[[Operation and maintenance (O&M) of permeable pavement]]
 +
**[[Operation and maintenance (O&M) of permeable pavement - supplemental information]]
  
<tr>
+
[[Category:Level 3 - Best management practices/Structural practices/Wet swale]]
<td>Vegetation is not able to establish
+
[[Category:Level 3 - Best management practices/Specifications and details/Operation and maintenance]]
<td>Plant selection is inappropriate for the site
+
</noinclude>
<td>Consult with a landscaper or horticulturist. Check that plants are suited to the local conditions. Make sure BMP is protected from snow storage or salt application.
 
</tr>
 
</table>
 

Latest revision as of 17:19, 28 January 2023

image
Image of a swale
Image of a swale at Lino Lakes city hall
Green Infrastructure: Swales can be an important tool for retention and detention of stormwater runoff. Because they utilize vegetation, swales provide additional benefits, including cleaner air, carbon sequestration, improved biological habitat, and aesthetic value.

This page provides guidance for operation and maintenance (O&M) of swales. This includes dry swales, wet swales, bioswales, and high gradient step pools.

Supplemental information can be found on the page called Operation and maintenance of swales - supplemental information. Supplemental information includes the following.

  • Infiltration rate service life before clogging
  • Nitrogen reduction
  • Phosphorus reduction
  • Heavy metals retention
  • Erosion protection
  • Sediment monitoring, removal, and disposal
  • Seeding, planting, and landscaping maintenance
  • Snow and salt considerations
  • Maintenance agreements
  • References

Overview of typical O&M issues

A grass or dry swale is a general term for filtration or infiltration conveyance practice, but there are a wide variety of designs depending on the site requirements. The key functions of swales are to convey water with reduced peak velocities and to perform water quality treatment with filtration and infiltration. Swales have the benefit of providing ecological function in areas dominated by development and impervious surface. These practices are ideal for urban settings, which creates an opportunity for humans to impact their function through vandalism, littering, and vehicular traffic.

These practices, like other green stormwater infrastructure, require regular maintenance to ensure proper and long-lasting ecosystem and stormwater function. If properly maintained, swales can operate effectively for 20-50 years, depending on the design type. Vegetated dry swales may perform properly for up to 50 years (Malvern Borough, 2013). The most frequently cited O&M concerns for swales include the following.

  • Standing water in the swale after a 48 hour timeline to infiltrate runoff
  • Loss of volume storage due to accumulated sediment
  • Clogged soil media
  • Clogged inlet and outlet structures, or underdrains
  • Growth and proliferation of weeds or other non- native species that threaten the long-term effectiveness of the swale

The sections below describe best practices to prevent or minimize these common problems.

Design phase O&M considerations

photo pretreatment filter strip
Pretreatment filter strip for a bioswale.

Swales, like other infiltration practices in urban areas, may be subject to higher public visibility, greater trash loads, pedestrian traffic, vandalism, and vehicular loads. Designers should design these practices in ways that prevent or minimize O&M issues. Examples include the following.

  • Designing easy-access points for maintenance personnel and equipment
  • Limiting the contributing drainage area and sizing the practice in accordance to its contributing drainage area
  • Adding pretreatment and trash racks to reduce sediment and debris loads.
  • Providing a vegetation design plan, emphasizing the following considerations
    • Utilizing native plantings that enhance pollinator and wildlife habitat, improve infiltration and erosion protection
  • Evapotranspiration, reduce urban heat island effect, provide optimized carbon sequestration, and provide climate adaptation. Native plantings typically require less maintenance and replacement than non-native plantings because they are adapted to the local climate (see Plants for Stormwater Design).
    • Site-specific plantings that take into account sun exposure, shade, proximity to traffic corners (visibility issues), interior vs exterior plantings, salt-tolerant plants, etc. The selection of plantings suitable to their immediate surroundings will minimize long-term care and replacement frequency.
  • Providing educational signage for swales in residential areas to increase public awareness

Designers should consult and include any local requirements regarding green infrastructure. O&M considerations often depend on whether the practice is located on public land, private land, or in the public right of way. For example, plantings in the public right of way that conflict with any traffic safety considerations could require increased O&M, such as pruning or complete removal. Swales are particularly subject to traffic considerations and regulations, given their frequent placement in public right-of-way.

The designer should also provide a site-specific O&M plan that includes the following.

  • Construction inspection schedule and checklists
  • Post-construction routine maintenance schedule and checklists
  • Operating instructions for the practice (if applicable)

For more information on design criteria for dry swale (grass swales).

Construction phase O&M considerations

image of MPD infiltrometer
The modified Philip-Dunne infiltrometer, as well as other direct infiltration measurements such as double ring infiltrometers, are preferred methods for measuring infiltration rates, compared to soil borings and pits. Image: University of Minnesota, St. Anthony Falls Laboratory.

Proper construction methods and sequencing play a significant role in reducing O&M problems. Some key items during the construction phase include the following.

  • Before construction begins
    • Install erosion control prior to excavation of swale
    • Hold a pre-construction meeting to review the construction plans and the sequencing of construction
    • Designate a stormwater supervisor to make sure someone is responsible for erosion and sediment control.
  • During construction
    • Construct any pretreatment devices first to trap sediments.
    • Ensure heavy equipment does not enter the footprint of the practice to avoid compaction of the growth medium
    • Ensure the correct plant species are being installed by having a detailed list of species and quantities. These should be spelled out in the plan set both in the Details and Specifications and on actual drawings. A copy should be kept on one’s person at all times during construction.
    • Inspect the practice during construction to ensure that the swale is built in accordance with the approved design and standards and specifications. Use a detailed inspection checklists that include sign-offs by qualified individuals at critical stages of construction, to ensure that the contractor’s interpretation of the plan is acceptable to the professional designer.
    • Conduct soil infiltration tests to ensure proper soil compaction
  • After construction
    • Verify that the swale was built in accordance with the approved design and standards and specifications
    • Verify that the practice properly conveys, filters, and/or infiltrates runoff. Ensure that no standing water remains within the swale 48 hours after precipitation.
    • Verify that pretreatment functions properly
    • Use a detailed inspection checklists that include sign-offs by qualified individuals at the completion of construction, to ensure that the contractor’s interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided here.
    • Review and discuss the plant warranty/establishment period with the plant provider to understand the conditions under which failing plants will be replaced. Divert stormwater away from BMP during establishment phase as necessary for the selected vegetation.
    • Determine if stormwater should be kept offline from the practice until the seedlings are established.
    • The design/construction team should provide the O&M team with the following information to be included in the O&M plan.
      • The plant warranty.
      • The as-built plans of the practice.
      • A list of conditions that might cause failure of the practice if not properly maintained.

Post-construction phase O&M

Effective short and long-term performance of grass swales requires a dedicated and routine maintenance plan with clear guidelines, expectations, and schedules. Proper maintenance will not only increase the effectiveness of the swale at treating stormwater runoff, but will create a viable green space supporting ecological function. A maintenance plan clarifying maintenance responsibilities should be required for all practices.

Some important post-construction considerations are provided below along with recommended maintenance standards.

  • A site-specific O&M plan should be prepared by the designer prior to completing construction of the grass swale. This plan should provide any operating procedures related to the practices. The plan should also provide clear maintenance expectations, activities, and schedules, including minimum maintenance frequencies expected. Include photos if possible. Be clear about who is responsible for the maintenance and the type of expertise that will be needed for distinct O&M activities. The O&M plan should include an anticipated budget for O&M activities. The O&M plan should also include an example O&M inspection checklist and an example maintenance report. Example O&M plans and inspection checklists are provided further down below.
  • A legally binding and enforceable maintenance agreement should be executed between the practice owner and the local review authority. Link here for example maintenance agreements.
  • Inspection and maintenance activities are distinct and can be done as separate activities or together. Inspection will typically assess the practice for any O&M issues, whereas maintenance will address the O&M issues identified by the inspection. A dedicated inspection effort on a large number of BMPs can help prioritize maintenance activities.
  • Maintenance activities should be careful not to cause compaction.
  • Ponded water that does not infiltrate within 48 hours of a storm is an indicator the swale is not functioning properly. If ponded water is observed outside of a routine O&M schedule it should be addressed immediately.
  • Best management practice (BMP) areas generally should not be used as dedicated snow storage areas. Snow storage within swales should be avoided when possible, such as in parking lots. Snow storage can cause compaction and increase sedimentation within the swale over time, and so snow storage on swales designed for infiltration should be specifically avoided. Link here for more information.

Overview and schedule of general maintenance activities for swales
Link to this table

First Year of Operation
Activity Frequency Time Period Level of Effort O&M Benefit1
Check that there is no ponding 48 hours after event All year long 1 hour 1
Inspect entire BMP after rainfall After any event greater than 0.5” All year long (or during area’s rain season) 2-4 hours 1
Correct earthwork if inlet scouring or unwanted flow paths develop As needed All year long >4 hours 1
Spot reseed bare patches and eroding areas As needed First growing season 2-4 hours 3,4,5
Supplemental watering during drier periods, particularly if keeping stormwater offline until plant seedlings are established. As needed Dry periods 1-2 hours 3,4,5
Remove any stormwater diversion or barriers once seedlings are established. Once When plants are sufficiently established 1-2 hours 1,2,3,4,5
Inspect and remove invasive plants and weeds during plant community establishment Monthly First growing season 1-2 hours 5,6
Mowing (dry swales) side slopes and/or grass filter strip to maintain 4-12” of height Seasonally As needed (do not interrupt any vegetative establishment) 2-4 hours 1
After First Year of Operation
Activity Frequency Time Period Level of Effort O&M Benefit1
Check that there is no ponding 48 hours after event All year long 1 hour 1
Inspect inlet/outlet structures for structural damage and clogging. Annually All year long 1-2 hours 1
Correct earthwork if inlet scouring or unwanted flow paths develop As needed All year long >4 hours 1
Mowing (dry swales) side slopes and/or grass filter to maintain 4-12” of height Seasonally All year long 2-4 hours 1
Inspect for trash and debris Seasonally All year long 2-4 hours 1,5
Check for evidence of clogging in the pre-treatment device and/or in the main treatment area. Biannually In spring and fall 1-2 hours 1
Inspect and remove excess sediment in the pre-treatment device and/or in the main treatment area. Annually In spring (post- snowmelt) and fall 4 hours if removal is needed 1
Inspect plant composition and health and replace as needed (maintain >95% vegetative cover) Biannually In fall or spring 4 hours if plant replacement is needed 4,5
Prune and weed to maintain appearance and proper vegetative cover As needed Growing season 1-2 hours 4,5,6,
After 5+ Years of Operation (non-routine maintenance)
Activity Frequency Time Period Level of Effort per Visit O&M Benefit1
After long term operation of the practice, some occasional and infrequent maintenance activities might be required, such as bigger repairs, soil regeneration, or redesign of key elements of the practice. As needed As needed Could be significant depending on the activity 1,2,3,4,5,6
1Key to Maintenance Benefits:
  • Proper stormwater flow and infiltration
  • Creation and maintenance of wildlife habitat
  • Creation and maintenance of pollinator habitat
  • Nutrient cycling and storage
  • Aesthetics and public enjoyment
  • Carbon sequestration



Common problems and how to troubleshoot them for swales
Link to this table

Symptom Possible Causes Solution
Standing water within the swale for more than 48 hours Soil media may be clogged with accumulated sediment or the outlet structures may be clogged with trash or de
Vegetation is not able to establish Plant selection is inappropriate for the site Consult with a landscaper or horticulturist. Check that plants are suited to the local conditions. Make sure BMP is protected from snow storage or salt application.


Maintenance costs

Maintenance costs will vary on a number of factors, including but not limited to the following.

  • Size of the practice and its contributing drainage area
  • Type of plantings used
  • Site visit frequency
  • Level of maintenance needed
  • Local weather conditions
  • Staffing needs (number of staff, external vs. internal staff, etc)
  • Travel time between sites
  • Efficiencies of scale (single GI vs. a cluster of GI)
  • Equipment needed

Maintenance costs will vary depending on the size of the practice, its contributing drainage area, type of plantings, and whether it is part of a larger green infrastructure effort. Preventative maintenance is key to minimizing major costs associated with repairs. A general rule of thumb to estimate annual maintenance costs is 5%-7% of the installation costs for swales (CWP, 2017). In 2014 dollars, the annual cost of maintenance is approximately $0.06-$0.12 per square foot of practice, which adjusts to $0.07-$0.14 in 2021 dollars, as estimated in the National Stormwater Calculator (Clary, 2017). Maintenance may be higher the first few years, while plants are being established.

Maintenance costs should account for the number of hours of labor, the cost for different types of labor expertise required, and any equipment needed to successfully complete the maintenance activities.

Useful resources

Additional detailed O&M information

More detailed information regarding specific maintenance activities are provided here. Topics discussed include

  • sustainable service life for infiltration and bioretention BMPs;
  • erosion protection and sediment monitoring, removal, and disposal;
  • seeding, planting, and landscaping maintenance;
  • snow and salt considerations;
  • maintenance agreements; and
  • aditional References.

Case studies

Maintenance training documents and videos

Example O&M plans, checklists, reports, and maintenance agreements for swales
Link to this table

Document Link
Operation & Maintenance Plan
Construction phase inspection checklist
O&M inspection checklist
O&M example report
Maintenance Agreements


References


Related pages

Green Infrastructure

This page was last edited on 28 January 2023, at 17:19.