m
 
(78 intermediate revisions by 2 users not shown)
Line 23: Line 23:
 
|}
 
|}
  
[http://stormwater.pca.state.mn.us/index.php/Overview_of_stormwater_credits Credit] refers to the quantity of stormwater or pollutant reduction achieved either by an individual [[Glossary#B|Best Management Practice]] BMP or cumulatively with multiple BMPs. Stormwater credits are a tool for local stormwater authorities who are interested in  
+
[[File:Pdf image.png|100px|thumb|left|alt=pdf image|<font size=3>[https://stormwater.pca.state.mn.us/index.php?title=File:Calculating_credits_for_dry_swale_(grass_swale)_-_Minnesota_Stormwater_Manual_May_2022.pdf Download pdf]</font size>]]
 +
[[File:Summary image.jpg|100px|left|thumb|alt=image|<font size=3>[https://stormwater.pca.state.mn.us/index.php?title=File:Credit_page_descriptions.mp4 Page video summary]</font size>]]
 +
[[File:Technical information page image.png|100px|left|alt=image]]
 +
 
 +
{{alert|Models are often selected to calculate credits. The model selected depends on your objectives. For compliance with the Construction Stormwater permit, the model must be based on the assumption that an instantaneous volume is captured by the BMP.|alert-danger}}
 +
 
 +
[http://stormwater.pca.state.mn.us/index.php/Overview_of_stormwater_credits Credit] refers to the quantity of stormwater or pollutant reduction achieved either by an individual <span title="One of many different structural or non–structural methods used to treat runoff"> '''best management practice'''</span> (BMP) or cumulatively with multiple BMPs. Stormwater credits are a tool for local stormwater authorities who are interested in  
 
*providing incentives to site developers to encourage the [[Credits for Better Site design|preservation of natural areas and the reduction of the volume of stormwater]] runoff being conveyed to a best management practice (BMP);  
 
*providing incentives to site developers to encourage the [[Credits for Better Site design|preservation of natural areas and the reduction of the volume of stormwater]] runoff being conveyed to a best management practice (BMP);  
*complying with permit requirements, including antidegradation (see [http://stormwater.pca.state.mn.us/index.php/Construction_stormwater_permit]; [http://stormwater.pca.state.mn.us/index.php/MS4_General_Permit]);
+
*complying with permit requirements, including antidegradation (see [https://stormwater.pca.state.mn.us/index.php?title=Construction_stormwater_program Construction permit]; [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_Program_for_Municipal_Separate_Storm_Sewer_Systems_(MS4) Municipal (MS4) permit]);
 
*meeting the [http://stormwater.pca.state.mn.us/index.php/Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or  
 
*meeting the [http://stormwater.pca.state.mn.us/index.php/Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or  
*meeting or complying with water quality objectives, including [[Total Maximum Daily Loads (TMDLs)|Total Maximum Daily Load]] (TMDL) Wasteload Allocations (WLAs).
+
*meeting or complying with water quality objectives, including <span title="The amount of a pollutant from both point and nonpoint sources that a waterbody can receive and still meet water quality standards"> [https://stormwater.pca.state.mn.us/index.php?title=Total_Maximum_Daily_Loads_(TMDLs) '''total maximum daily load''']</span> (TMDL) <span title="The portion of a receiving water's assimilative capacity that is allocated to one of its existing or future point sources of pollution"> '''wasteload allocations'''</span> (WLAs).
  
This page provides a discussion of how [[Filtration|dry swales]] can achieve stormwater credits. Swales with and without [[Glossary#U|underdrains]] are both discussed, with separate sections for each type of system as appropriate. Note that wet swales achieve no volume reduction and have limited pollutant removal capability. Wet swales are therefore not included in the following discussion.
+
This page provides a discussion of how [https://stormwater.pca.state.mn.us/index.php?title=Dry_swale_(Grass_swale) dry swales] can achieve stormwater credits. Swales with and without [[Glossary#U|underdrains]] are both discussed, with separate sections for each type of system as appropriate.
  
 
==Overview==
 
==Overview==
 
[[File:dry swale credit picture 1.jpg|thumb|300px|alt=schematic of dry swale|<font size=3>Schematic showing characteristics of a dry swale.</font size>]]
 
[[File:dry swale credit picture 1.jpg|thumb|300px|alt=schematic of dry swale|<font size=3>Schematic showing characteristics of a dry swale.</font size>]]
  
Dry swales, sometimes called grass swales, are similar to bioretention cells but are configured as shallow, linear channels. Dry swales function primarily as a conveyance BMP, but provide treatment of stormwater runoff, particularly when used in tandem with check dams that temporarily retain water in a series of cells. Dry swales with an underdrain and engineered soil media are considered a filtration practice. Dry swales with in-situ soils capable of infiltration, ([[Design infiltration rates|A or B soils]]) are considered infiltration practices. Dry swales are designed to prevent standing water. Dry swales typically have vegetative cover such as turf or native perennial grasses.
+
<span title="Dry swales, sometimes called grass swales, are similar to bioretention cells but are configured as shallow, linear channels. They typically have vegetative cover such as turf or native perennial grasses. Dry swales may be constructed as filtration or infiltration practices, depending on soils."> [https://stormwater.pca.state.mn.us/index.php?title=Dry_swale_(Grass_swale) '''Dry swales''']</span>, sometimes called grass swales, are similar to <span title="Bioretention is a terrestrial-based (up-land as opposed to wetland) water quality and water quantity control process. Bioretention employs a simplistic, site-integrated design that provides opportunity for runoff infiltration, filtration, storage, and water uptake by vegetation. Bioretention areas are suitable stormwater treatment practices for all land uses, as long as the contributing drainage area is appropriate for the size of the facility. Common bioretention opportunities include landscaping islands, cul-de-sacs, parking lot margins, commercial setbacks, open space, rooftop drainage and street-scapes (i.e., between the curb and sidewalk). Bioretention, when designed with an underdrain and liner, is also a good design option for treating Potential stormwater hotspots. Bioretention is extremely versatile because of its ability to be incorporated into landscaped areas. The versatility of the practice also allows for bioretention areas to be frequently employed as stormwater retrofits."> '''bioretention practices'''</span> but are configured as shallow, linear channels. Dry swales function primarily as a conveyance BMP, but provide treatment of stormwater runoff, particularly when used in tandem with <span title="A check dam is a structure installed perpendicular to flow in a natural or manmade conveyance channel to reduce flow velocity. By slowing flow velocities, check dams can serve multiple functions including reduction of channel scour and erosion, enhancement of sediment trapping, and greater treatment of the water quality control volume via enhanced water detention or retention. Typical check dam materials include rock, earth, wood, and concrete. "> '''check dams'''</span> that temporarily retain water in a series of cells. Dry swales with an <span title="An underground drain or trench with openings through which the water may percolate from the soil or ground above"> '''underdrain'''</span> and <span title="Engineered media is a mixture of sand, fines (silt, clay), and organic matter utilized in stormwater practices, most frequently in bioretention practices. The media is typically designed to have a rapid infiltration rate, attenuate pollutants, and allow for plant growth."> [https://stormwater.pca.state.mn.us/index.php?title=Design_criteria_for_bioretention#Materials_specifications_-_filter_media '''engineered media''']</span> are considered a <span title="Filtration Best Management Practices (BMPs) treat urban stormwater runoff as it flows through a filtering medium, such as sand or an organic material. They are generally used on small drainage areas (5 acres or less) and are primarily designed for pollutant removal. They are effective at removing total suspended solids (TSS), particulate phosphorus, metals, and most organics. They are less effective for soluble pollutants such as dissolved phosphorus, chloride, and nitrate."> [https://stormwater.pca.state.mn.us/index.php?title=Filtration '''filtration''']</span> practice. Dry swales with in-situ soils capable of <span title="Infiltration Best Management Practices (BMPs) treat urban stormwater runoff as it flows through a filtering medium and into underlying soil, where it may eventually percolate into groundwater. The filtering media is typically coarse-textured and may contain organic material, as in the case of bioinfiltration BMPs."> [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_infiltration_Best_Management_Practices '''infiltration''']</span>, ([[Design infiltration rates|A or B soils]]) are considered infiltration practices. Dry swales are designed to prevent standing water. Dry swales typically have [https://stormwater.pca.state.mn.us/index.php?title=Plants_for_swales vegetative cover] such as turf or native perennial grasses.
  
 
===Pollutant Removal Mechanisms===
 
===Pollutant Removal Mechanisms===
Dry swales without check dams or with underdrains primarily remove pollutants through [[Glossary#F|filtration]] during conveyance of stormwater runoff. Dry swales may also provide some volume reduction benefits through [[Glossary#I|infiltration]] and [[Glossary#E|evapotranspiration]] during conveyance. Water quality treatment is also recognized through biological and microbiological uptake, and soil adsorption. Check dams may be incorporated into dry swale design to enhance infiltration.
+
Dry swales without check dams or with underdrains primarily remove pollutants through filtration during conveyance of stormwater runoff. Dry swales may also provide some volume reduction benefits through infiltration and <span title="Loss of water to the atmosphere as a result of the joint processes of evaporation and transpiration through vegetation"> '''evapotranspiration'''</span> during conveyance or below an underdrain. Water quality treatment is also recognized through biological and microbiological uptake, and soil adsorption. Check dams] may be incorporated into dry swale design to enhance infiltration.
  
 
===Location in the Treatment Train===
 
===Location in the Treatment Train===
Dry swales may be located throughout the [https://stormwater.pca.state.mn.us/index.php?title=Using_the_treatment_train_approach_to_BMP_selection treatment train], including the main form of conveyance between or out of BMPs, at the end of the treatment train, or designed as off-line configurations where the water quality volume is diverted to the filtration or infiltration practice. In any case, the practice may be applied as part of a stormwater management system to achieve one or more of the following objectives:
+
Dry swales may be located throughout a <span title="Multiple BMPs that work together to remove pollutants utilizing combinations of hydraulic, physical, biological, and chemical methods"> [https://stormwater.pca.state.mn.us/index.php?title=Using_the_treatment_train_approach_to_BMP_selection '''treatment train''']</span>, including the main form of conveyance between or out of BMPs, at the end of a treatment train, or designed as off-line configurations where the <span title="The volume of water that is treated by a BMP."> [https://stormwater.pca.state.mn.us/index.php?title=Water_quality_criteria '''Water Quality Volume''']</span> is diverted to the filtration or infiltration practice. In any case, the practice may be applied as part of a stormwater management system to achieve one or more of the following objectives.
 
*reduce stormwater pollutants (filtration or infiltration practices)
 
*reduce stormwater pollutants (filtration or infiltration practices)
 
*increase groundwater recharge (infiltration practices)
 
*increase groundwater recharge (infiltration practices)
 
*decrease runoff peak flow rates (filtration or infiltration practices)
 
*decrease runoff peak flow rates (filtration or infiltration practices)
 
*decrease the volume of stormwater runoff (infiltration practices)
 
*decrease the volume of stormwater runoff (infiltration practices)
*preserve base flow in streams (infiltration practices)
+
*preserve <span title="Baseflow (also called drought flow, groundwater recession flow, low flow, low-water flow, low-water discharge and sustained or fair-weather runoff) is the portion of streamflow delayed shallow subsurface flow".> '''baseflow'''</span> in streams (infiltration practices)
 
*reduce thermal impacts of runoff (filtration or infiltration practices)
 
*reduce thermal impacts of runoff (filtration or infiltration practices)
  
Line 51: Line 57:
 
This section describes the basic concepts and equations used to calculate credits for volume, Total Suspended Solids (TSS) and Total Phosphorus (TP). Specific methods for calculating credits are discussed [http://stormwater.pca.state.mn.us/index.php/Calculating_credits_for_swale#Methods_for_calculating_credits later in this article].
 
This section describes the basic concepts and equations used to calculate credits for volume, Total Suspended Solids (TSS) and Total Phosphorus (TP). Specific methods for calculating credits are discussed [http://stormwater.pca.state.mn.us/index.php/Calculating_credits_for_swale#Methods_for_calculating_credits later in this article].
  
Dry swale practices generate credits for volume, TSS,and TP. Dry swale practices with an underdrain do not substantially reduce the volume of runoff but may qualify for a partial volume credit as a result of evapotranspiration, infiltration occurring through the sidewalls above the underdrain, and infiltration below the underdrain piping. Dry swale practices are effective at reducing concentrations of other pollutants including metals and hydrocarbons. They are generally not effective at removing bacteria. This article does not provide information on calculating credits for pollutants other than TSS and TP, but references are provided that may be useful for calculating credits for [http://stormwater.pca.state.mn.us/index.php/Calculating_credits_for_swale#Other_pollutants other pollutants].  
+
Dry swale practices generate credits for volume, TSS,and TP. Dry swale practices with an underdrain do not substantially reduce the volume of runoff but may qualify for a partial volume credit as a result of evapotranspiration, infiltration occurring through the sidewalls above the underdrain, and infiltration below the underdrain piping. Dry swale practices are effective at reducing concentrations of other pollutants including metals and <span title="A compound of hydrogen and carbon, such as any of those which are the chief components of petroleum and natural gas."> '''hydrocarbons'''</span>. They are generally not effective at removing bacteria. This article does not provide information on calculating credits for pollutants other than TSS and TP, but references are provided that may be useful for calculating credits for [http://stormwater.pca.state.mn.us/index.php/Calculating_credits_for_swale#Other_pollutants other pollutants].  
  
 
===Assumptions and Approach===
 
===Assumptions and Approach===
Line 58: Line 64:
 
{{alert|[[Pretreatment]] is required for all filtration and infiltration practices|alert-danger}}
 
{{alert|[[Pretreatment]] is required for all filtration and infiltration practices|alert-danger}}
  
Unlike other BMPs such as bioretention and permeable pavement, credits for swales are calculated in two ways. First, if check dams are incorporated into the design, the water quality volume (V<sub>WQ</sub>) is assumed to be delivered instantaneously to the BMP and stored as water ponded behind the check dam, above the filter media, and below the overflow point of the check dam. V<sub>WQ</sub> can vary depending on the stormwater management objective(s). For construction stormwater, V<sub>WQ</sub> is 1 inch times new impervious surface area. For MIDS, the V<sub>WQ</sub> is 1.1 inches times impervious surface area.
+
Unlike other BMPs such as bioretention and permeable pavement, credits for swales are calculated in two ways. First, if check dams are incorporated into the design, the water quality volume (V<sub>WQ</sub>) is assumed to be delivered instantaneously to the BMP and stored as water ponded behind the check dam, above the soil or filter media, and below the overflow point of the check dam. V<sub>WQ</sub> can vary depending on the stormwater management objective(s). For construction stormwater, V<sub>WQ</sub> is 1 inch times new impervious surface area. For [https://stormwater.pca.state.mn.us/index.php?title=Minimal_Impact_Design_Standards MIDS], the V<sub>WQ</sub> is 1.1 inches times impervious surface area.
  
If check dams are not incorporated into the swale, water will infiltrate into the underlying soil or filter media as it is conveyed along the swale. The amount of water captured in this manner is a function of the underlying soil permeability and the slope of the swale.
+
Second, if check dams are not incorporated into the swale, water will infiltrate into the underlying soil or filter media as it is conveyed along the swale. The amount of water captured in this manner is a function of the underlying soil permeability and the length of time flowing water is in contact with the soil, which in turn is affected by the slope of the swale.
  
 
===Volume credit calculations - check dams and no underdrain===
 
===Volume credit calculations - check dams and no underdrain===
 
[[File:MIDS swale dimensions no drain.png|300px|thumb|alt=schematic swale no drain|<font size=3>Schematic illustrating terms and dimensions used for volume and pollutant calculations, no underdrain.</font size>]]
 
[[File:MIDS swale dimensions no drain.png|300px|thumb|alt=schematic swale no drain|<font size=3>Schematic illustrating terms and dimensions used for volume and pollutant calculations, no underdrain.</font size>]]
  
Volume credits are typically calculated based on the capacity of the BMP and its ability to permanently remove stormwater runoff from the existing stormwater collection system. When check dams are incorporated into the design, these credits are assumed to be instantaneous values entirely based on the capacity of the BMP for any storm event. Instantaneous volume reduction, or event based volume reduction of a BMP can be converted to annual volume reduction percentages using the MIDS calculator or other appropriate modeling tools.  
+
Volume credits are typically calculated based on the capacity of the BMP and its ability to permanently remove stormwater runoff from the existing stormwater collection system. When check dams are incorporated into the design, these credits are assumed to be instantaneous values entirely based on the capacity of the BMP for any storm event. Instantaneous volume reduction, or event based volume reduction of a BMP can be converted to annual volume reduction percentages using the [https://stormwater.pca.state.mn.us/index.php?title=MIDS_calculator MIDS calculator] or other appropriate modeling tools.  
  
Credits for dry swales with check dams are dependent on multiple design factors of the swale channel and side slopes, as well as infiltration rates for underlying soils. The water quality volume (V<sub>wq)</sub> achieved behind each check dam (instantaneous volume) is given by
+
Credits for dry swales with check dams are dependent on multiple design factors of the swale channel and side slopes, as well as infiltration rates for underlying soils. The water quality volume (V<sub>wq</sub>) achieved behind each check dam (<span title="The maximum volume of water that can be retained by a stormwater practice (bmp) if the water was instantaneously added to the practice. It equals the depth of the practice times the average area of the practice. For some bmps (e.g. bioretention, infiltration trenches and basins, swales with check dams), the volume is the water stored or retained above the media, while for other practices (e.g. permeable pavement, tree trenches) the volume is the water stored or retained within the media."> '''instantaneous volume'''</span>) is given by
  
<math> V_{wq} = h^2 * (h * H + B_w)]/(2S) </math>
+
<math> V_{wq} = [h^2 * (h * H + B_w)]/(2S) </math>
  
 
where
 
where
:h = check dam height (inches)
+
:h = check dam height (inches);
:H = horizontal component of the swale side slope (1 vertical : H horizontal)(inches)
+
:H = horizontal component of the swale side slope (1 vertical : H horizontal)(unitless);
 
:S = slope (unitless); and
 
:S = slope (unitless); and
:Bw = channel bottom width (inches)
+
:B<sub>w</sub> = channel bottom width (inches).
 +
 
 +
Convert the volume to cubic feet by dividing by 1728.
  
 
Add the V<sub>wq</sub> for each check dam together to obtain the cumulative water quality volume for the swale.
 
Add the V<sub>wq</sub> for each check dam together to obtain the cumulative water quality volume for the swale.
Line 89: Line 97:
 
===Volume credit calculations - check dams with an underdrain===
 
===Volume credit calculations - check dams with an underdrain===
 
[[File:MIDS swale dimensions.png|300px|thumb|alt=schematic swale no drain|<font size=3>Schematic illustrating terms and dimensions used for volume and pollutant calculations, with underdrain.</font size>]]
 
[[File:MIDS swale dimensions.png|300px|thumb|alt=schematic swale no drain|<font size=3>Schematic illustrating terms and dimensions used for volume and pollutant calculations, with underdrain.</font size>]]
[[file:Bioretention water loss raised underdrain.png|300px|thumb|alt=water loss mechanisms bioretention with raised underdrain|<font size=3>Schematic illustrating the different water loss terms for a biofiltration BMP with a raised underdrain.</font size>]]
+
[[file:Bioretention water loss raised underdrain.png|300px|thumb|alt=water loss mechanisms bioretention with raised underdrain|<font size=3>Schematic illustrating the different water loss terms for a swale (biofiltration) BMP with a raised underdrain.</font size>]]
  
Volume credit for a swale with check dams and an underdrain is the same as for a biofiltration BMP, although some of the BMP configurations differ somewhat. Volume credits are available only if the BMP permanently removes a portion of the stormwater runoff via infiltration through sidewalls or beneath the underdrain piping, or through evapotranspiration. These credits are assumed to be instantaneous values based on the design capacity of the BMP for a specific storm event. Instantaneous volume reduction, also termed event based volume reduction, can be converted to annual volume reduction percentages using the [http://stormwater.pca.state.mn.us/index.php/Performance_curves_for_MIDS_calculator MIDS calculator] or other appropriate modeling tools.
+
Volume credit for a swale with check dams and an underdrain is the same as for a [https://stormwater.pca.state.mn.us/index.php?title=Calculating_credits_for_bioretention#Volume_credit_calculations_-_underdrain biofiltration BMP], although some of the BMP configurations differ somewhat. Volume credits are available only if the BMP permanently removes a portion of the stormwater runoff via infiltration through sidewalls or beneath the underdrain piping, or through evapotranspiration. These credits are assumed to be instantaneous values based on the design capacity of the BMP for a specific storm event. Instantaneous volume reduction, also termed event based volume reduction, can be converted to annual volume reduction percentages using the [http://stormwater.pca.state.mn.us/index.php/Performance_curves_for_MIDS_calculator MIDS calculator] or other appropriate modeling tools.
  
Volume credits for a dry swale with check dams and underdrains are calculated by a combination of infiltration through the unlined sides and bottom of the basin (the area above the underdrain), the volume loss through evapotranspiration (ET), and the retention volume below a raised underdrain, if applicable (this is based on the assumption that this stored water will infiltrate into the underlying soil). The main design variables impacting the volume credits include whether the underdrain is elevated above the native soils and if an impermeable liner on the sides or bottom of the basin is used. Other design variables include surface area at the check dam overflow, media top surface area, underdrain location, and basin bottom locations, total depth of media, soil water holding capacity and media porosity, and infiltration rate of underlying soils.
+
Volume credits for a dry swale with check dams and underdrains are calculated by a combination of infiltration through the unlined sides and bottom of the basin (the area below the underdrain), the volume loss through evapotranspiration (ET), and the retention volume below a raised underdrain, if applicable (this is based on the assumption that this stored water will infiltrate into the underlying soil). The main design variables impacting the volume credits include whether the underdrain is elevated above the native soils and if an <span title="Impermeable means not allowing something, such as water, to pass through. Some materials considered impermeable may actually allow water to pass through at very slow rates, such as 10(-8) cm/sec."> '''impermeable'''</span> liner on the sides or bottom of the basin is used. Other design variables include surface area at the check dam overflow, media top surface area, underdrain location, and basin bottom locations, total depth of media, soil <span title="The ability of a certain soil texture to physically hold water against the force of gravity"> '''water holding capacity'''</span>, soil <span title="Porosity or void fraction is a measure of the void (i.e. empty) spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%."> '''porosity (f)'''</span>, and <span title="The assumed infiltration rate into soil or engineered media when determining the dimensions (depth, surface area) of a stormwater practice."> '''[https://stormwater.pca.state.mn.us/index.php?title=Design_infiltration_rate_as_a_function_of_soil_texture_for_bioretention_in_Minnesota design infiltration rate]''' </span> of underlying soils.
  
 
{{alert|For the following equations, units most commonly used in practice are given and unit correction factors are based on those units|alert-info}}
 
{{alert|For the following equations, units most commonly used in practice are given and unit correction factors are based on those units|alert-info}}
Line 111: Line 119:
 
Volume credits for infiltration through the bottom of the basin (V<sub>inf<sub>b</sub></sub>) are accounted for only if the bottom of the basin is not lined. As long as water continues to draw down, some infiltration will occur through the bottom of the BMP.  However, it is assumed that when an underdrain is included in the installation, the majority of water will be filtered through the media and exit through the underdrain. Because of this, the drawdown time is likely to be short. Volume credit for infiltration through the bottom of the basin is given by
 
Volume credits for infiltration through the bottom of the basin (V<sub>inf<sub>b</sub></sub>) are accounted for only if the bottom of the basin is not lined. As long as water continues to draw down, some infiltration will occur through the bottom of the BMP.  However, it is assumed that when an underdrain is included in the installation, the majority of water will be filtered through the media and exit through the underdrain. Because of this, the drawdown time is likely to be short. Volume credit for infiltration through the bottom of the basin is given by
  
<math> V_{inf_B} = A_B\  DDT\ I_R/12 </math>
+
<math> V_{inf_B} = A_B\  DDT\ I_R/12 / 2 </math>
  
 
where
 
where
Line 117: Line 125:
 
:A<sub>B</sub> = surface area at the bottom of the basin (square feet); and
 
:A<sub>B</sub> = surface area at the bottom of the basin (square feet); and
 
:DDT = drawdown time for ponded water (hours).
 
:DDT = drawdown time for ponded water (hours).
 +
 +
Because of the slope in a swale and the resulting unequal pool depth behind a check dam, a correction factor of 2 is included in the above equation.
  
 
{{alert|The MIDS calculator assigns a default value of 0.06 inches per hour, equivalent to a D soil, to I<sub>R</sub>. This is based on the assumption that most water will drain to the underdrain, but that some loss to underlying soil will occur. A conservative approach assuming a D soil was thus chosen.|alert-info}}
 
{{alert|The MIDS calculator assigns a default value of 0.06 inches per hour, equivalent to a D soil, to I<sub>R</sub>. This is based on the assumption that most water will drain to the underdrain, but that some loss to underlying soil will occur. A conservative approach assuming a D soil was thus chosen.|alert-info}}
  
The drawdown time is typically a maximum of 48 hours, which is designed to be protective of plants grown in the media. The [http://stormwater.pca.state.mn.us/index.php/Construction_stormwater_permit Construction Stormwater permit] requires drawdown within 48 hours and recommends 24 hours when discharges are to a trout stream. With a properly functioning underdrain, the drawdown time is likely to be considerably less than 48 hours.
+
The <span title="The length of time, usually expressed in hours, for ponded water in a stormwater practice to drain. For stormwater practices where water is stored in media, there is no clear definition of drawdown, but an acceptable assumption is the time for water to drain to field capacity"> '''drawdown time'''</span> is typically a maximum of 48 hours, which is designed to be protective of plants grown in the media. The [https://stormwater.pca.state.mn.us/index.php?title=Construction_stormwater_program Construction Stormwater permit] requires drawdown within 48 hours and recommends 24 hours when discharges are to a trout stream. With a properly functioning underdrain, the drawdown time is likely to be considerably less than 48 hours.
  
 
Volume credit for infiltration through the sides of the basin is accounted for only if the sides of the basin are not lined with an impermeable liner. Volume credit for infiltration through the sides of the basin is given by
 
Volume credit for infiltration through the sides of the basin is accounted for only if the sides of the basin are not lined with an impermeable liner. Volume credit for infiltration through the sides of the basin is given by
Line 146: Line 156:
 
This is an instantaneous volume. This will somewhat overestimate actual storage when the majority of water is being captured by the underdrains. This equation assumes water between the [http://stormwater.pca.state.mn.us/index.php/Soil_water_storage_properties soil porosity and field capacity] will infiltrate into the underlying soil.
 
This is an instantaneous volume. This will somewhat overestimate actual storage when the majority of water is being captured by the underdrains. This equation assumes water between the [http://stormwater.pca.state.mn.us/index.php/Soil_water_storage_properties soil porosity and field capacity] will infiltrate into the underlying soil.
  
The volume of water lost through ET is assumed to be the smaller of two calculated values: potential ET and measured ET. Potential ET (ET<sub>pot</sub>) is equal to the amount of water stored in the basin between [http://stormwater.pca.state.mn.us/index.php/Soil_water_storage_properties field capacity and the wilting point]. Measured ET (ET<sub>mea</sub>) is the amount of water lost to ET as measured using available data and is assumed to be 0.2 inches/day. ET<sub>mea</sub> is converted to ET by multiplying by a factor of 0.5.  ET is considered to occur over a period equal to the drawdown time of the basin. Volume credit for evapotranspiration is given by the lesser of
+
The volume of water lost through ET is assumed to be the smaller of two calculated values: potential ET and measured ET. Potential ET (ET<sub>pot</sub>) is equal to the amount of water stored in the basin between <span title="Field capacity is the amount of soil moisture or water content held in soil after excess water has drained away and the rate of downward movement has materially decreased, which usually takes place within 2–3 days after a rain or irrigation in pervious soils of uniform structure and texture."> '''field capacity'''</span> and the <span title="The wilting point, also called the permanent wilting point, may be defined as the amount of water per unit weight or per unit soil bulk volume in the soil, expressed in percent, that is held so tightly by the soil matrix that roots cannot absorb this water and a plant will wilt."> '''wilting point'''</span>. Measured ET (ET<sub>mea</sub>) is the amount of water lost to ET as measured using available data and is assumed to be 0.2 inches/day. ET<sub>mea</sub> is converted to ET by multiplying by a factor of 0.5.  ET is considered to occur over a period equal to the drawdown time of the basin. Volume credit for evapotranspiration is given by the lesser of
  
 
<math> ET_{mea} = (0.2/12)\ A\ 0.5\ t </math>
 
<math> ET_{mea} = (0.2/12)\ A\ 0.5\ t </math>
Line 157: Line 167:
 
:C<sub>S</sub> = soil water available for ET, generally assumed to be the water between field capacity and wilting point.
 
:C<sub>S</sub> = soil water available for ET, generally assumed to be the water between field capacity and wilting point.
  
ET is likely to be greater if one or more trees is planted in the biofiltration basin.  Planting a tree in a biofiltration system is HIGHLY RECOMMENDED. The MIDS calculator increases the above ET credit by a factor of 3 when a tree is planted in the bioretention basin.
+
ET is likely to be greater if one or more trees is planted in the swale. The MIDS calculator increases the above ET credit by a factor of 3 when a tree is planted in the swale, but this credit is not available for swales. See [[Plants for swales]] for information about trees that might be acceptable in swales.
  
Provided soil water content is greater than the wilting point, ET will continually occur during the non-frozen period. However, because the above volume calculations are event based, t will be equal to the time between rain events. In the MIDS calculator, a value of 3 days is used because this is the average number of days between precipitation events. ET will occur over the entire media depth. D may therefore be set equal to the media depth (D<sub>M</sub>). In this case, the value for A would be the average area through the entire depth of the media. The MIDS calculator limits ET to the area above the underdrain. If infiltration is being computed through the bottom and sidewalls of the basin, then C<sub>S</sub> would be field capacity minus the wilting point of soils (cubic feet per cubic foot) since water above the field capacity would infiltrate (or go to an underdrain).
+
Provided <span title="The moisture content of soil is described as the ratio of the mass of water held in the soil to the dry soil. The mass of water is determined by the difference before and after drying the soil. Water content may also be expressed on a volume basis if the bulk density is known.> '''soil water (moisture) content'''</span> is greater than the wilting point, ET will continually occur during the non-frozen period. However, because the above volume calculations are event based, t will be equal to the time between rain events. In the MIDS calculator, a value of 3 days is used because this is the average number of days between precipitation events. ET will occur over the entire media depth. D may therefore be set equal to the media depth (D<sub>M</sub>). In this case, the value for A would be the average area through the entire depth of the media. The MIDS calculator limits ET to the area above the underdrain. If infiltration is being computed through the bottom and sidewalls of the basin, then C<sub>S</sub> would be field capacity minus the wilting point of soils (cubic feet per cubic foot) since water above the field capacity would infiltrate (or go to an underdrain).
  
 
The volume of water passing through underdrains can be determined by subtracting the volume loss (V) from the volume of water instantaneously captured by the BMP. No volume reduction credit is given for filtered stormwater that exits through the underdrain, but the volume of filtered water can be used in the calculation of pollutant removal credits through filtration.
 
The volume of water passing through underdrains can be determined by subtracting the volume loss (V) from the volume of water instantaneously captured by the BMP. No volume reduction credit is given for filtered stormwater that exits through the underdrain, but the volume of filtered water can be used in the calculation of pollutant removal credits through filtration.
  
The volume reduction credit (V) can be converted to an annual volume if desired. This conversion can be generated using the [[MIDS calculator|MIDS calculator]] or other appropriate modeling techniques. The MIDS calculator obtains the percentage annual volume reduction through [http://stormwater.pca.state.mn.us/index.php/Performance_curves_for_MIDS_calculator performance curves] developed from multiple modeling scenarios using the volume reduction capacity for biofiltration, the infiltration rate of the underlying soils, and the contributing watershed size and imperviousness.
+
The volume reduction credit (V) can be converted to an annual volume if desired. This conversion can be generated using the [[MIDS calculator|MIDS calculator]] or other appropriate modeling techniques. The MIDS calculator obtains the percentage annual volume reduction through [http://stormwater.pca.state.mn.us/index.php/Performance_curves_for_MIDS_calculator performance curves] developed from multiple modeling scenarios using the volume reduction capacity for swales, the infiltration rate of the underlying soils, and the contributing watershed size and imperviousness.
  
 
===Volume credit calculations - no check dam===
 
===Volume credit calculations - no check dam===
When a check dam is not incorporated into the design, water will infiltrate into the soil or media as it is conveyed along the swale. Volume credits for swales without check dams can be calculated using an appropriate model, such as the MIDS calculator or soil infiltration models (e.g. Green and Ampt).
+
When a check dam is not incorporated into the design, water will infiltrate into the soil or media as it is conveyed along the swale. Volume credits for swales without check dams can be calculated using an appropriate model, such as the MIDS calculator or soil infiltration models (e.g. [https://www.hydrology.bee.cornell.edu/BEE3710Handouts/GreenAmpt.pdf Green and Ampt]).
 
<!--The following approach is utilized for calculating volumes in the MIDS calculator. The volume calculation for filtered stormwater (V<sub>F</sub>) of a dry swale is given by
 
<!--The following approach is utilized for calculating volumes in the MIDS calculator. The volume calculation for filtered stormwater (V<sub>F</sub>) of a dry swale is given by
  
Line 207: Line 217:
  
 
===Water quality credit calculations===
 
===Water quality credit calculations===
Quality credits applied to dry swales can be calculated by rainfall event or annual rainfall. This value is obtained from the filtration volume capacity of the BMP (calculated above). Dry swales provide water quality credit through filtration of stormwater runoff while being conveyed through the swale.
+
Water quality credits applied to dry swales can be calculated by rainfall event or annual rainfall. This value is obtained from the infiltration and filtration volume capacity of the BMP (calculated above).
  
 
====Total suspended solids====
 
====Total suspended solids====
TSS reduction credits correspond with volume reduction through filtration of water along the swale side slopes and main channel. Dry swales assume percent removal for overflow, or filtered, water.  
+
TSS reduction credits correspond with volume reduction through infiltration and filtration of water captured by the swale and are given by
 +
 
 +
<math> M_{TSS} = M_{TSS_i} + M_{TSS_f} </math>
 +
 
 +
where
 +
:M<sub>TSS</sub> = TSS removal (pounds);
 +
:M<sub>TSS_i</sub> = TSS removal from infiltrated water (pounds); and
 +
:M<sub>TSS_f</sub> = TSS removal from filtered water (pounds).
 +
 
 +
Pollutant removal for infiltrated water is assumed to be 100 percent. The event-based mass of pollutant removed through infiltration, in pounds, is given by
 +
 
 +
*filtration (underdrain) - <math> M_{TSS_i} = 0.0000624\ (V_{inf_b} + V_{inf_s} + V_U)\ EMC_{TSS} </math>
 +
*infiltration - <math> M_{TSS_i} = 0.0000624\ V_{WQ}\ EMC_{TSS} </math>
 +
 
 +
where
 +
:EMC<sub>TSS</sub> is the <span title="The average pollutant concentration for a given stormwater event, expressed in units of mass per volume (e.g., mg/L)"> '''event mean TSS concentration'''</span> in runoff water entering the BMP (milligrams per liter).
  
Annual pollutant reduction calculations are dependent on the annual filtration volume (VAnnual) of the dry swale (calculated above).  
+
The EMC<sub>TSS</sub> entering the BMP is a function of the contributing land use and treatment by upstream tributary BMPs. For more information on EMC values for TSS, [http://stormwater.pca.state.mn.us/index.php/Total_Suspended_Solids_%28TSS%29_in_stormwater link here] or [https://stormwater.pca.state.mn.us/index.php?title=Event_mean_concentrations_by_land_use here].
  
The Annual TSS credit (M<sub>TSS-F</sub>) for filtered runoff is given by
+
Removal for the filtered portion is less than 100 percent. The event-based mass of pollutant removed through filtration, in pounds, is given by
  
<math> M_{TSS} = R_({TSS%}) * 2.72 * (V_{Annual}) *〖EMC〗_{TSS} </sub>
+
<math> M_{TSS_f} = 0.0000624\ (V_{total} - (V_{inf_b} + V_{inf_s} + V_U))\ EMC_{TSS}\ R_{TSS} </math>
  
where:
+
where
:M<sub>TSS</sub> = Annual TSS removal (lb/year);
+
:V<sub>total</sub> is the total volume of water captured by the BMP (cubic feet); and
:V<sub>annual</sub> = Annual filtration volume credit calculated above (acre-ft);
+
:R<sub>TSS</sub> is the TSS pollutant removal percentage for filtered runoff.
:EMC<sub>TSS</sub> = Event Mean Concentration, concentration of TSS in the runoff (mg/L). Note: if dry swale is not the upstream most BMP in the treatment train, EMC<sub>TSS</sub> should be dependent on the MTSS effluent (mg/L) from the next upstream tributary BMP;
 
:RT<sub>SS%</sub> = [[Pollutant removal percentages for filtration BMPs|TSS pollutant removal percentage]] for filtered runoff. Alternate justified percentages for TSS removal can be used if proven to be applicable to BMP design; and
 
:Factor of 2.72 used for conversion of acre-feet to liters and milligrams to pounds.
 
  
Event pollutant volume reduction calculations are dependent on the filtration volume capacity (VF) of the BMP calculated above and the [[III. STORMWATER DISCHARGE DESIGN REQUIREMENTS|rainfall depth of the design storm event]] of the BMP.
+
The [https://stormwater.pca.state.mn.us/index.php?title=Information_on_pollutant_removal_by_BMPs Stormwater Manual] provides a recommended value for R<sub>TSS</sub> of 0.68 (68 percent) removal for filtered water. Alternate justified percentages for TSS removal can be used if proven to be applicable to the BMP design.
  
The storm event based TSS credit (M<sub>TSS</sub>) for filtered runoff is given by
+
The above calculations may be applied on an event or annual basis and are given by
  
<math> M_{TSS} = R_(TSS%) * 2.72 * (V_F / 43,560) *〖EMC〗_{TSS} </math>
+
<math> M_{TSS_f} = 2.72\ F\ V_{F_{annual}}\ EMC_{TSS}\ R_{TSS} </math>
  
where:
+
where
:EMC<sub>TSS</sub> = [[Introduction to stormwater modeling|Event Mean Concentration]] of TSS in the runoff (mg/L). Note: if dry swale is not the upstream most BMP in the treatment train, EMCTSS should be dependent on the MTSS effluent (mg/L) from the next upstream tributary BMP;
+
:F is the fraction of annual volume filtered through the BMP; and
:R<sub>TSS%</sub> = [[Pollutant removal percentages for filtration BMPs|TSS pollutant removal percentage]] for filtered runoff. Alternate justified percentages for TSS removal can be used if proven to be applicable to BMP design;
+
:V<sub>annual</sub> is the annual volume treated by the BMP, in acre-feet.
:V<sub>F</sub> = Event based volume of filtered stormwater for the BMP, calculated above (cf); and
 
:Factor of 2.72 used for conversion of acre-feet to liters and milligrams to pounds. A Factor of 43,560 is used for conversion of volume from cubic feet to acre-ft.
 
  
 
====Total phosphorus====
 
====Total phosphorus====
Similar to TSS, TP reduction credits correspond with volume of filtered water along the swale side slopes and main channel of the swale. Because no infiltration credit is recognized, dry swales assume no removal credit for dissolved phosphorus (DP). It is assumed that TP credits are made up of 55% particulate phosphorus (PP) and 45% dissolved phosphorus (DP). 
+
Total phosphorus (TP) reduction credits correspond with volume reduction through infiltration and filtration of water captured by the swale and are given by
  
Total removal of Total Phosphorus Solids by dry swales is given by:
+
<math> M_{TP} = M_{TP_i} + M_{TP_f} </math>
  
<math> M_{TP} = M_{(TP-I)} + M_{(TP-F)} </math>
+
where
 +
*M<sub>TP</sub> = TP removal (pounds);
 +
*M<sub>TP_i</sub> = TP removal from infiltrated water (pounds); and
 +
*M<sub>TP_f</sub> = TP removal from filtered water (pounds).
  
where:
+
Pollutant removal for infiltrated water is assumed to be 100 percent. The mass of pollutant removed through infiltration, in pounds, is given by
:M<sub>TP</sub> =Annual or event TP removal (lb/yr or lb/event);
+
 
:M<sub>TP-I</sub> =Annual or event TP removal from infiltrated runoff (lb/yr or lb/event); and
+
*filtration (underdrain) - <math> M_{TP_i} = 0.0000624\ (V_{inf_b} + V_{inf_s} + V_U)\ EMC_{TP} </math>
:M<sub>TP-F</sub> =Annual or event TP removal from filtered runoff.
+
*infiltration - <math> M_{TP_i} = 0.0000624\ V_{WQ} \ EMC_{TP} </math>
 +
 
 +
where
 +
*EMC<sub>TP</sub> is the event mean TP concentration in runoff water entering the BMP (milligrams per liter).
  
Annual volume reduction TP credits are dependent on the annual filtration volume (V<sub>annua</sub>l) of the dry swale (calculated above). The TP credit for filtered runoff is only available for PP, no DP credit is given.
+
The [https://stormwater.pca.state.mn.us/index.php?title=Event_mean_concentrations_by_land_use EMC<sub>TP</sub>] entering the BMP is a function of the contributing land use and treatment by upstream tributary BMPs.
  
The annual TP credit (M<sub>TP</sub>) for filtered runoff through a dry swale is given by
+
The [https://stormwater.pca.state.mn.us/index.php?title=Information_on_pollutant_removal_by_BMPs filtration credit for TP] in a swale with underdrains assumes removal rates based on the [http://stormwater.pca.state.mn.us/index.php/Design_criteria_for_bioretention#Materials_specifications_-_filter_media soil media mix] used and the presence or absence of [http://stormwater.pca.state.mn.us/index.php/Soil_amendments_to_enhance_phosphorus_sorption amendments]. Soil mixes with more than [[Design criteria for bioretention#Notes about soil phosphorus testing: applicability and interpretation|30 mg/kg phosphorus]] (P) content are likely to leach phosphorus and do not qualify for a water quality credit.  If the soil phosphorus concentration is less than 30 mg/kg, the mass of phosphorus removed through filtration, in pounds, is given by
  
<math> M_{TP} = 0.55 * PP_% * EMC_{TP} * 2.72 * (V_{annual} </math>
+
<math> M_{TP_f} = 0.0000624\ (V_{total} - (V_{inf_b} + V_{inf_s} + V_U))\ EMC_{TP}\ R_{TP} </math>
  
where:
+
{{alert|Soil mixes [[Design criteria for bioretention#Mix C: North Carolina State University water quality blend|C]] and [[Design criteria for bioretention#Mix D|D]] are assumed to contain less than 30 mg/kg of phosphorus and therefore do not require testing|alert-info}}
:PP% = [[Pollutant removal percentages for filtration BMPs|Particulate phosphorus removal percentage]] for planting soil media. For dry swales with an underdrain, the lower end of the removal range provided should be used for the percent phosphorus removal. Phosphorus in water entering the soil is assumed to be 55% in the particulate form;
 
:EMC<sub>TP</sub> = [[Introduction to stormwater modeling|Event Mean Concentration]] of TP in runoff (mg/L). Note: if dry swale is not the upstream most BMP in the treatment train, EMCTP should be dependent on the MTP effluent (mg/L) from the next upstream tributary BMP;
 
:V<sub>annual</sub> = Annual volume reduction credit calculated above (acre-ft); and
 
:Factor of 2.72 used for conversion of acre-feet to liters and milligrams to pounds.
 
  
Event pollutant volume reduction calculations are dependent on the filtration volume (VF) capacities of the BMP calculated above.
+
Again, assuming the phosphorus content in the media is less than 30 milligrams per kilogram, the [http://stormwater.pca.state.mn.us/index.php/Phosphorus_credits_for_bioretention_systems_with_an_underdrain removal efficiency (R<sub>TP</sub>) provided in the Stormwater Manual] is a function of the fraction of phosphorus that is in particulate or dissolved form, the depth of the media, and the presence or absence of soil amendments.  For the purpose of calculating credits it can be assumed that TP in storm water runoff consists of 55 percent particulate phosphorus (PP) and 45 percent dissolved phosphorus (DP). The removal efficiency for particulate phosphorus is 68 percent. The removal efficiency for dissolved phosphorus is 20 percent if the media depth is 2 feet or greater. The efficiency decreases by 1 percent for each 0.1 foot decrease in media thickness below 2 feet. If a soil amendment is added to the BMP design, an additional 40 percent credit is applied to dissolved phosphorus. Thus, the overall removal efficiency, (R<sub>TP</sub>), expressed as a percent removal of total phosphorus, is given by
  
The storm event based TP credit (M<sub>TP</sub>) for filtered runoff is given by
+
<math> R_{TP} = (0.68 * 0.55) + (0.45 * ((0.2 * (D_{MU_{max=2}})/2) + 0.40_{if amendment is used})) * 100 </math>
  
<math> M_{TP} =〖0.55 * PP〗_% * 2.72 * (V_F / 43,560) *〖EMC〗_{TSS} </math>
+
where
 +
*the first term on the right side of the equation represents the removal of particulate phosphorus;
 +
*the second term on the right side of the equation represents the removal of dissolved phosphorus; and
 +
*D<sub>MU<sub>max=2</sub></sub> = the media depth above the underdrain, up to a maximum of 2 feet.
  
where:
+
The assumption of 55 percent particulate phosphorus and 45 percent dissolved phosphorus is likely inaccurate for certain land uses, such as industrial, transportation, and some commercial areas. Studies indicate particulate phosphorus comprises a greater percent of total phosphorus in these land uses. It may therefore be appropriate to modify the above equation with locally derived ratios for particulate and dissolved phosphorus. For more information on fractionation of phosphorus in stormwater runoff, [https://stormwater.pca.state.mn.us/index.php?title=Event_mean_concentrations_of_total_and_dissolved_phosphorus_in_stormwater_runoff#Ratios_of_particulate_to_dissolved_phosphorus link here].
:PP<sub>%</sub> = [[Pollutant removal percentages for filtration BMPs|Particulate phosphorus removal percentage]] for planting soil media. For dry swales with an underdrain, the lower end of the removal range provided should be used for the percent phosphorus removal. Phosphorus in water entering the soil is assumed to be 55% in the particulate form,
 
:V<sub>F</sub> = Event based volume of filtered stormwater for the BMP, calculated above (cf),
 
:EMC<sub>TP</sub>= [[Introduction to stormwater modeling|Event Mean Concentration]] of TP in the runoff (mg/L). Note: if dry swale is not the upstream most BMP in the treatment train, EMC<sub>TP</sub> should be dependent on the MTP effluent (mg/L) from the next upstream tributary BMP; and
 
:Factor of 2.72 used for conversion of acre-feet to liters and milligrams to pounds. A Factor of 43,560 is used for conversion of volume from cubic feet to acre-ft.
 
  
 
==Methods for calculating credits==
 
==Methods for calculating credits==
This section provides specific information on generating and calculating credits from bioretention BMPS for volume, Total Suspended Solids (TSS) and Total Phosphorus (TP). Stormwater runoff volume and pollution reductions (“credits”) may be calculated using one of the following methods:
+
This section provides specific information on generating and calculating credits from swale BMPS for volume, Total Suspended Solids (TSS) and Total Phosphorus (TP). Stormwater runoff volume and pollution reductions (“credits”) may be calculated using one of the following methods:
*Quantifying volume and pollution reductions based on accepted hydrologic models
+
*Quantifying volume and pollution reductions based on [https://stormwater.pca.state.mn.us/index.php?title=Available_stormwater_models_and_selecting_a_model accepted hydrologic models]
*The Simple Method and MPCA Estimator
+
*[https://stormwater.pca.state.mn.us/index.php?title=The_Simple_Method_for_estimating_phosphorus_export The Simple Method] and [https://stormwater.pca.state.mn.us/index.php?title=Guidance_and_examples_for_using_the_MPCA_Estimator MPCA Estimator]
*MIDS Calculator
+
*[https://stormwater.pca.state.mn.us/index.php?title=MIDS_calculator MIDS Calculator]
 
*Quantifying volume and pollution reductions based on values reported in literature
 
*Quantifying volume and pollution reductions based on values reported in literature
 
*Quantifying volume and pollution reductions based on field monitoring
 
*Quantifying volume and pollution reductions based on field monitoring
  
 
===Credits based on models===
 
===Credits based on models===
 +
{{alert|The model selected depends on your objectives. For compliance with the Construction Stormwater permit, the model must be based on the assumption that an instantaneous volume is captured by the BMP.|alert-danger}}
 +
 
Users may opt to use a water quality model or calculator to compute volume, TSS and/or TP pollutant removal for the purpose of determining credits for dry swales. The available models described in the following sections are commonly used by water resource professionals, but are not explicitly endorsed or required by the Minnesota Pollution Control Agency.  
 
Users may opt to use a water quality model or calculator to compute volume, TSS and/or TP pollutant removal for the purpose of determining credits for dry swales. The available models described in the following sections are commonly used by water resource professionals, but are not explicitly endorsed or required by the Minnesota Pollution Control Agency.  
  
Line 295: Line 318:
  
 
{{:Stormwater model and calculator comparisons}}
 
{{:Stormwater model and calculator comparisons}}
 +
 +
===The Simple Method and MPCA Estimator===
 +
The Simple Method is a technique used for estimating storm pollutant export delivered from urban development sites. Pollutant loads are estimated as the product of <span title="The average pollutant concentration for a given stormwater event, expressed in units of mass per volume (e.g., mg/L)"> '''event mean concentration'''</span> and runoff depths over specified periods of time (usually annual or seasonal). The method was developed to provide an easy yet reasonably accurate means of predicting the change in pollutant loadings in response to development. [http://www.stormwatercenter.net/Library/Practice/13.pdf Ohrel] (2000) states: "In general, the Simple Method is most appropriate for small watersheds (<640 acres) and when quick and reasonable stormwater pollutant load estimates are required". Rainfall data, land use (runoff coefficients), land area, and pollutant concentration are needed to use the Simple Method.  For more information on the Simple Method, see [http://www.stormwatercenter.net/monitoring%20and%20assessment/simple%20meth/simple.htm The Simple method to Calculate Urban Stormwater Loads] or [[The Simple Method for estimating phosphorus export]].
 +
 +
Some simple stormwater calculators utilize the Simple Method ([https://www.epa.gov/nps/spreadsheet-tool-estimating-pollutant-loads-stepl EPA STEPL], [https://www.stormwatercenter.net/monitoring%20and%20assessment/watershed_treatment_model.htm Watershed Treatment Model]). The MPCA developed a simple calculator for estimating load reductions for TSS, total phosphorus, and bacteria. Called the [http://stormwater.pca.state.mn.us/index.php/Guidance_and_examples_for_using_the_MPCA_Estimator '''MPCA Estimator'''], this tool was developed specifically for complying with the [https://stormwater.pca.state.mn.us/index.php?title=Forms,_guidance,_and_resources_for_completing_the_TMDL_annual_report_form MS4 General Permit TMDL annual reporting requirement].  The MPCA Estimator provides default values for pollutant concentration, <span title="The runoff coefficient (C) is a dimensionless coefficient relating the amount of runoff to the amount of precipitation received. It is a larger value for areas with low infiltration and high runoff (pavement, steep gradient), and lower for permeable, well vegetated areas (forest, flat land)."> [https://stormwater.pca.state.mn.us/index.php?title=Runoff_coefficients_for_5_to_10_year_storms '''runoff coefficients''']</span> for different land uses, and precipitation, although the user can modify these and is encouraged to do so when local data exist. The user is required to enter area for different land uses and area treated by BMPs within each of the land uses.  BMPs include infiltrators (e.g. bioinfiltration, infiltration basin, tree trench, permeable pavement, etc.), filters (biofiltration, sand filter, green roof), constructed ponds and wetlands, and swales/filters. The MPCA Estimator includes standard removal efficiencies for these BMPs, but the user can modify those values if better data are available.  Output from the calculator is given as a load reduction (percent, mass, or number of bacteria) from the original estimated load.
 +
 +
{{alert|The MPCA Estimator should not be used for modeling a stormwater system or selecting BMPs.|alert-warning}}
 +
 +
Because the MPCA Estimator does not consider BMPs in series, makes simplifying assumptions about runoff and pollutant removal processes, and uses generalized default information, it should only be used for estimating pollutant reductions from an estimated load. It is not intended as a decision-making tool.
 +
 +
'''[https://stormwater.pca.state.mn.us/index.php?title=File:MPCA_simple_estimator_version_3.0_March_5_2021.xlsx Download MPCA Estimator here]'''
  
 
===MIDS Calculator===
 
===MIDS Calculator===
 +
[[File:mids logo.jpg|thumb|300 px|alt=mids logo|<font size=3>Download the [[Calculator|MIDS Calculator]]</font size>]]
  
Users should refer to the [[MIDS calculator|MIDS Calculator]] section of the WIKI for additional information and guidance on credit calculation using this approach.
+
The [[MIDS calculator|Minimal Impact Design Standards (MIDS) best management practice (BMP) calculator]] is a tool used to determine stormwater runoff volume and pollutant reduction capabilities of various low impact development (LID) BMPs. The MIDS calculator estimates the stormwater runoff volume reductions for various BMPs and annual pollutant load reductions for total phosphorus (including a breakdown between particulate and dissolved phosphorus) and total suspended solids (TSS). The calculator was intended for use on individual development sites, though capable modelers could modify its use for larger applications.
 +
 
 +
The MIDS calculator is designed in Microsoft Excel with a graphical user interface (GUI), packaged as a windows application, used to organize input parameters.  The Excel spreadsheet conducts the calculations and stores parameters, while the GUI provides a platform that allows the user to enter data and presents results in a user-friendly manner. 
 +
 
 +
Detailed [[Links to Manual pages that address the MIDS calculator|guidance]] has been developed for all BMPs in the calculator, including [https://stormwater.pca.state.mn.us/index.php?title=Links_to_Manual_pages_that_address_the_MIDS_calculator swales]. An overview of individual input parameters and workflows is presented in the [http://stormwater.pca.state.mn.us/index.php/User%E2%80%99s_Guide MIDS Calculator User Documentation].
  
 
===Credits Based on Reported Literature Values===
 
===Credits Based on Reported Literature Values===
Line 307: Line 346:
  
 
Designers who opt for this approach should:
 
Designers who opt for this approach should:
*Select the median value from pollutant reduction databases that report a range of reductions, such as from the [http://bmpdatabase.org/index.htm International BMP Database].   
+
*Select the median value from pollutant reduction databases that report a range of reductions, such as from the [https://bmpdatabase.org/ International BMP Database].   
 
*Select a pollutant removal reduction from literature that studied a dry swale device with site characteristics and climate similar to the device being considered for credits.
 
*Select a pollutant removal reduction from literature that studied a dry swale device with site characteristics and climate similar to the device being considered for credits.
 
*When using data from an individual study, review the article to determine that the design principles of the studied dry swale are close to the design recommendations for Minnesota, as described [[Bioretention - bioinfiltration |here]], and/or by a local permitting agency.
 
*When using data from an individual study, review the article to determine that the design principles of the studied dry swale are close to the design recommendations for Minnesota, as described [[Bioretention - bioinfiltration |here]], and/or by a local permitting agency.
Line 314: Line 353:
 
The following references summarize pollutant reduction values from multiple studies or sources that could be used to determine credits. Users should note that there is a wide range of monitored pollutant removal effectiveness in the literature. Before selecting a literature value, users should compare the characteristics of the monitored site in the literature against the characteristics of the proposed dry swale, considering such conditions as watershed characteristics, swale sizing, and climate factors.  
 
The following references summarize pollutant reduction values from multiple studies or sources that could be used to determine credits. Users should note that there is a wide range of monitored pollutant removal effectiveness in the literature. Before selecting a literature value, users should compare the characteristics of the monitored site in the literature against the characteristics of the proposed dry swale, considering such conditions as watershed characteristics, swale sizing, and climate factors.  
  
*[http://bmpdatabase.org/Docs/2012%20Water%20Quality%20Analysis%20Addendum/BMP%20Database%20Categorical_SummaryAddendumReport_Final.pdf International Stormwater Best Management Practices (BMP) Database Pollutant Category Summary Statistical Addendum: TSS, Bacteria, Nutrients, and Metals].
+
*[https://bmpdatabase.org/ International Stormwater Best Management Practices (BMP) Database Pollutant Category Summary Statistical Addendum: TSS, Bacteria, Nutrients, and Metals]
**Compilation of BMP performance studies published through 2011.
+
**Compilation of BMP performance studies published through 2011
 
**Provides values for TSS, Bacteria, Nutrients, and Metals
 
**Provides values for TSS, Bacteria, Nutrients, and Metals
**Applicable to grass strips, bioretention, bioswales, detention basins, green roofs, manufactured devices, media filters, porous pavements, wetland basins, and wetland channels.
+
**Applicable to grass strips, bioretention, bioswales, detention basins, green roofs, manufactured devices, media filters, porous pavements, wetland basins, and wetland channels
 
+
*[http://lshs.tamu.edu/docs/lshs/end-notes/updated%20bmp%20removal%20efficiencies%20from%20the%20national%20pollutant%20re-2854375963/updated%20bmp%20removal%20efficiencies%20from%20the%20national%20pollutant%20removal%20database.pdf Updated BMP Removal Efficiencies from the National Pollutant Removal Database (2007) & Acceptable BMP Table for Virginia]
*[https://www.portlandoregon.gov/bes/article/133994 Effectiveness Evaluation of Best Management Practices for Stormwater Management in Portland, Oregon].====
+
**Provides data for several structural and non-structural BMP performance evaluations
**Appendix M contains Excel spreadsheet of structural and non-structural BMP performance evaluations.
+
*[http://www.epa.state.il.us/green-infrastructure/docs/draft-final-report.pdf The Illinois Green Infrastructure Study]
**Provides values for sediment, nutrients, pathogens, metals, quantity, air purification, carbon sequestration, flood storage, avian habitat, aquatics habitat and aesthetics.
+
**Figure ES-1 summarizes BMP effectiveness
**Applicable to Filters, Wet Ponds, Porous Pavements, Soakage Trenches, Flow through Stormwater Planters, Infiltration Stormwater Planters, Vegetated Infiltration Basins, Swales, and Treatment Wetlands.
 
*[http://www.epa.state.il.us/green-infrastructure/docs/draft-final-report.pdf The Illinois Green Infrastructure Study]
 
**Figure ES-1 summarizes BMP effectiveness
 
 
**Provides values for TN, TSS, peak flows / runoff volumes
 
**Provides values for TN, TSS, peak flows / runoff volumes
 
**Applicable to Permeable Pavements, Constructed Wetlands, Infiltration, Detention, Filtration, and Green Roofs
 
**Applicable to Permeable Pavements, Constructed Wetlands, Infiltration, Detention, Filtration, and Green Roofs
* [http://des.nh.gov/organization/divisions/water/stormwater/manual.htm New Hampshire Stormwater Manual].
+
* [https://www.des.nh.gov/sites/g/files/ehbemt341/files/documents/2020-01/wd-08-20b.pdf New Hampshire Stormwater Manual]
 
**Volume 2, Appendix B summarizes BMP effectiveness
 
**Volume 2, Appendix B summarizes BMP effectiveness
 
**Provides values for TSS, TN, and TP removal
 
**Provides values for TSS, TN, and TP removal
 
**Applicable to basins and wetlands, stormwater wetlands, infiltration practices, filtering practices, treatment swales, vegetated buffers, and pre-treatment practices
 
**Applicable to basins and wetlands, stormwater wetlands, infiltration practices, filtering practices, treatment swales, vegetated buffers, and pre-treatment practices
*[http://www.epa.gov/region1/npdes/stormwater/assets/pdfs/BMP-Performance-Analysis-Report.pdf BMP Performance Analysis].  Prepared for US EPA Region 1, Boston MA.  
+
*[https://www3.epa.gov/region1/npdes/stormwater/tools/BMP-Performance-Analysis-Report.pdf BMP Performance Analysis].  Prepared for US EPA Region 1, Boston MA.
 
**Appendix B provides pollutant removal performance curves
 
**Appendix B provides pollutant removal performance curves
**Provides values for TP, TSS, and Zn
+
**Provides values for TP, TSS, and Zn
**Pollutant removal broken down according to land use
+
**Pollutant removal broken down according to land use
**Applicable to Infiltration Trench, Infiltration Basin, Bioretention, Grass Swale, Wet Pond, and Porous Pavement.
+
**Applicable to Infiltration Trench, Infiltration Basin, Bioretention, Grass Swale, Wet Pond, and Porous Pavement
*Weiss, P.T., J.S. Gulliver and A.J. Erickson. 2005. [http://www.lrrb.org/media/reports/200523.pdf The Cost and Effectiveness of Stormwater Management Practices: Final Report].
+
*Weiss, P.T., J.S. Gulliver and A.J. Erickson. 2005. [http://www.lrrb.org/media/reports/200523.pdf The Cost and Effectiveness of Stormwater Management Practices: Final Report]
 
**Table 8 and Appendix B provides pollutant removal efficiencies for TSS and P
 
**Table 8 and Appendix B provides pollutant removal efficiencies for TSS and P
**Applicable to Wet Basins, Stormwater Wetlands, Bioretention Filter, Sand Filter, Infiltration Trench, and Filter Strips/Grass Swales.
+
**Applicable to Wet Basins, Stormwater Wetlands, Bioretention Filter, Sand Filter, Infiltration Trench, and Filter Strips/Grass Swales
  
 
===Credits Based on Field Monitoring===
 
===Credits Based on Field Monitoring===
 +
Field monitoring may be used to calculate stormwater credits in lieu of desktop calculations or models/calculators as described.  Careful planning is HIGHLY RECOMMENDED before commencing a program to monitor the performance of a BMP.  The general steps involved in planning and implementing BMP monitoring include the following.
 +
#Establish the objectives and goals of the monitoring.
 +
##Which pollutants will be measured?
 +
##Will the monitoring study the performance of a single BMP or multiple BMPs?
 +
##Are there any variables that will affect the BMP performance?  Variables could include design approaches, maintenance activities, rainfall events, rainfall intensity, etc.
 +
##Will the results be compared to other BMP performance studies?
 +
##What should be the duration of the monitoring period?  Is there a need to look at the annual performance vs the performance during a single rain event?  Is there a need to assess the seasonal variation of BMP performance?
 +
#Plan the field activities.  Field considerations include:
 +
##Equipment selection and placement
 +
##Sampling protocols including selection, storage, delivery to the laboratory
 +
##Laboratory services
 +
##Health and Safety plans for field personnel
 +
##Record keeping protocols and forms
 +
##Quality control and quality assurance protocols
 +
#Execute the field monitoring
 +
#Analyze the results
 +
 +
The following guidance manuals have been developed to assist BMP owners and operators on how to plan and implement BMP performance monitoring.
 +
:[http://water.epa.gov/scitech/wastetech/guide/stormwater/monitor.cfm '''Urban Stormwater BMP Performance Monitoring''']
 +
Geosyntec Consultants and Wright Water Engineers prepared this guide in 2009 with support from the USEPA, Water Environment Research Foundation, Federal Highway Administration, and the Environment and Water Resource Institute of the American Society of Civil Engineers.  This guide was developed to improve and standardize the protocols for all BMP monitoring and to provide additional guidance for Low Impact Development (LID) BMP monitoring.
 +
Highlighted chapters in this manual include:
 +
*Chapter 2: Designing the Program
 +
*Chapters 3 & 4: Methods and Equipment
 +
*Chapters 5 & 6: Implementation, Data Management, Evaluation and Reporting
 +
*Chapter 7: BMP Performance Analysis
 +
*Chapters 8, 9, & 10: LID Monitoring
 +
 +
:[http://onlinepubs.trb.org/onlinepubs/nchrp/nchrp_rpt_565.pdf '''Evaluation of Best Management Practices for Highway Runoff Control (NCHRP Report 565)''']
 +
AASHTO (American Association of State Highway and Transportation Officials) and the FHWA (Federal Highway Administration) sponsored this 2006 research report, which was authored by Oregon State University, Geosyntec Consultants, the University of Florida, and the Low Impact Development Center.  The primary purpose of this report is to advise on the selection and design of BMPs that are best suited for highway runoff.  The document includes the following chapters on performance monitoring that may be a useful reference for BMP performance monitoring, especially for the performance assessment of a highway BMP:
 +
*Chapter 4: Stormwater Characterization
 +
**4.2: General Characteristics and Pollutant Sources
 +
**4.3: Sources of Stormwater Quality data
 +
*Chapter 8: Performance Evaluation
 +
**8.1: Methodology Options
 +
**8.5: Evaluation of Quality Performance for Individual BMPs
 +
**8.6: Overall Hydrologic and Water Quality Performance Evaluation
 +
*Chapter 10: Hydrologic Evaluation
 +
**10.5: Performance Verification and Design Optimization
 +
 +
:[http://wefstormwaterinstitute.org/wp-content/uploads/2016/08/WEF-STEPP-White-Paper_Final_02-06-142.pdf '''Investigation into the Feasibility of a National Testing and Evaluation Program for Stormwater Products and Practices'''].
 +
In 2014 the Water Environment Federation released this White Paper that investigates the feasibility of a national program for the testing of stormwater products and practices.  The information contained in this White Paper would be of use to those considering the monitoring of a manufactured BMP.  The report does not include any specific guidance on the monitoring of a BMP, but it does include a summary of the existing technical evaluation programs that could be consulted for testing results for specific products (see Table 1 on page 8).
 +
 +
:'''Caltrans Stormwater Monitoring Guidance Manual (Document No. CTSW-OT-13-999.43.01''')
 +
The most current version of this manual was released by the State of California, Department of Transportation in November 2013.  As with the other monitoring manuals described, this manual does include guidance on planning a stormwater monitoring program.  However, this manual is among the most thorough for field activities.  Relevant chapters include:
 +
*Chapter 4: Monitoring Methods and Equipment
 +
*Chapter 5: Analytical Methods and Laboratory Selection
 +
*Chapter 6: Monitoring Site Selection
 +
*Chapter 8: Equipment Installation and Maintenance
 +
*Chapter 10: Pre-Storm Preparation
 +
*Chapter 11: Sample Collection and Handling
 +
*Chapter 12: Quality Assurance / Quality Control
 +
*Chapter 13: Laboratory Reports and Data Review
 +
*Chapter 15: Gross Solids Monitoring
 +
 +
:[http://stormwaterbook.safl.umn.edu/ '''Optimizing Stormwater Treatment Practices: A Handbook of Assessment and Maintenance''']
 +
 +
This online manual was developed in 2010 by Andrew Erickson, Peter Weiss, and John Gulliver from the University of Minnesota and St. Anthony Falls Hydraulic Laboratory with funding provided by the Minnesota Pollution Control Agency.  The manual advises on a four-level process to assess the performance of a Best Management Practice.
 +
*Level 1: [https://stormwaterbook.safl.umn.edu/assessment-programs/visual-inspection Visual Inspection]
 +
*Level 2: [https://stormwaterbook.safl.umn.edu/assessment-programs/capacity-testing Capacity Testing]
 +
*Level 3: [http://stormwaterbook.safl.umn.edu/assessment-programs/synthetic-runoff-testing Synthetic Runoff Testing]
 +
*Level 4: [https://stormwaterbook.safl.umn.edu/assessment-programs/monitoring Monitoring]
 +
 +
Level 1 activities do not produce numerical performance data that could be used to obtain a stormwater management credit.  BMP owners and operators who are interested in using data obtained from Levels 2 and 3 should consult with the MPCA or other regulatory agency to determine if the results are appropriate for credit calculations.  Level 4, Monitoring, is the method most frequently used for assessment of the performance of a BMP.
 +
 +
Use these links to obtain detailed information on the following topics related to BMP performance monitoring:
 +
*[https://stormwaterbook.safl.umn.edu/water-budget-measurement Water Budget Measurement]
 +
*[https://stormwaterbook.safl.umn.edu/sampling-methods Sampling Methods]
 +
*[https://stormwaterbook.safl.umn.edu/analysis-water-and-soils Analysis of Water and Soils]
 +
*[https://stormwaterbook.safl.umn.edu/data-analysis Data Analysis for Monitoring]
  
 
==Other pollutants==
 
==Other pollutants==
Line 346: Line 451:
  
 
{{:Dry swale pollutant load reduction}}
 
{{:Dry swale pollutant load reduction}}
 
<sup>1</sup>Results are for total metals only
 
 
<sup>2</sup>Information on As was found only in the International Stormwater Database where removal was found to be low
 
  
 
==References and suggested reading==
 
==References and suggested reading==
Line 363: Line 464:
 
*Consultants, Geosyntec, and Wright Water Engineers. "Urban stormwater BMP performance monitoring." (2002).
 
*Consultants, Geosyntec, and Wright Water Engineers. "Urban stormwater BMP performance monitoring." (2002).
 
*Leisenring, M., J. Clary, and P. Hobson. "International Stormwater Best Management Practices (BMP) Database Pollutant Category Summary Statistical Addendum: TSS, Bacteria, Nutrients, and Metals July 2012." (2012): 1-31.
 
*Leisenring, M., J. Clary, and P. Hobson. "International Stormwater Best Management Practices (BMP) Database Pollutant Category Summary Statistical Addendum: TSS, Bacteria, Nutrients, and Metals July 2012." (2012): 1-31.
*Gulliver, J. S., A. J. Erickson, and PTe Weiss. "Stormwater treatment: Assessment and maintenance." University of Minnesota, St. Anthony Falls Laboratory. Minneapolis, MN. http://stormwaterbook. safl. umn. edu (2010).
+
*Gulliver, J. S., A. J. Erickson, and PTe Weiss. "Stormwater treatment: Assessment and maintenance." University of Minnesota, St. Anthony Falls Laboratory. Minneapolis, MN. (2010).
 
*Guo, James CY, Gerald E. Blackler, T. Andrew Earles, and Ken MacKenzie. "Incentive index developed to evaluate storm-water low-impact designs." Journal of Environmental Engineering 136, no. 12 (2010): 1341-1346.
 
*Guo, James CY, Gerald E. Blackler, T. Andrew Earles, and Ken MacKenzie. "Incentive index developed to evaluate storm-water low-impact designs." Journal of Environmental Engineering 136, no. 12 (2010): 1341-1346.
 
*Harper, Harvey H. "Effects of stormwater management systems on groundwater quality." FDEP Project# WM190. Florida Department of Environmental Regulation, Tallahassee, FL (1988).
 
*Harper, Harvey H. "Effects of stormwater management systems on groundwater quality." FDEP Project# WM190. Florida Department of Environmental Regulation, Tallahassee, FL (1988).
Line 381: Line 482:
  
 
<noinclude>
 
<noinclude>
 +
 
==Related articles==
 
==Related articles==
*Filtration
+
*Dry swales
**[[Overview for filtration]]
+
**[[Terminology for swales|Terminology for swales (grass channels)]]
**[[Types of filtration]]
+
**[[Overview for dry swale (grass swale)]]
**[[Design criteria for filtration]]
+
**[[BMPs for stormwater infiltration|Types of infiltration]]
**[[Construction specifications for filtration]]
+
**[[BMPs for stormwater filtration|Types of filtration]]
**[[Assessing the performance of swales]]
+
**[[Design criteria for dry swale (grass swale)]]
**[[Assessing the performance of sand filters]]
+
**[[Construction specifications for dry swale (grass swale)]]  
**[[Operation and maintenance of filtration]]
+
**[[Operation and maintenance of dry swale (grass swale)]]
**[[Calculating credits for sand filter]]
+
**[[Assessing the performance of dry swale (grass swale)]]
**[[Calculating credits for swale]]
+
**[[Calculating credits for dry swale (grass swale)]]
**[[Cost-benefit considerations for filtration]]
+
**[[Cost considerations for dry swale (grass swale)]]
**[[References for filtration]]
+
**[[Case studies for dry swale (grass swale)]]
 +
**[[Plants for swales]]
 +
**[[Check dams for stormwater swales]]
 +
**[[External resources for swales|External resources for dry swale (grass swale)]]
 +
**[[References for dry swale (grass swale)]]
 +
**[https://stormwater.pca.state.mn.us/index.php?title=Requirements,_recommendations_and_information_for_using_swale_without_an_underdrain_as_a_BMP_in_the_MIDS_calculator Requirements, recommendations and information for using dry swale (grass swale) without an underdrain in the MIDS calculator]
 +
**[https://stormwater.pca.state.mn.us/index.php?title=Requirements,_recommendations_and_information_for_using_swale_with_an_underdrain_as_a_BMP_in_the_MIDS_calculator Requirements, recommendations and information for using dry swale (grass swale) with an underdrain in the MIDS calculator]
 +
**[[Requirements, recommendations and information for using swale side slope as a BMP in the MIDS calculator]]
 
*Calculating credits
 
*Calculating credits
 
**[[Calculating credits for bioretention]]
 
**[[Calculating credits for bioretention]]
Line 404: Line 513:
 
**[[Calculating credits for stormwater wetlands]]
 
**[[Calculating credits for stormwater wetlands]]
 
**[[Calculating credits for iron enhanced sand filter]]
 
**[[Calculating credits for iron enhanced sand filter]]
**[[Calculating credits for swale]]
 
 
**[[Calculating credits for tree trenches and tree boxes]]
 
**[[Calculating credits for tree trenches and tree boxes]]
 
**[[Calculating credits for stormwater and rainwater harvest and use/reuse]]
 
**[[Calculating credits for stormwater and rainwater harvest and use/reuse]]
 +
*[[Calculating credits for dry swale (grass swale)]]
 +
*[[Calculating credits for dry swale (grass swale)|Step-pool]]
 +
*[[Calculating credits for wet swale (wetland channel)]]
  
[[category:Calculating credits]]
+
[[Category:Level 3 - Best management practices/Guidance and information/Pollutant removal and credits]]
 +
[[Category:Level 3 - Best management practices/Structural practices/Dry swale]]
 +
[[Category:Level 2 - Pollutants/Pollutant removal]]
 
</noinclude>
 
</noinclude>

Latest revision as of 13:52, 29 December 2022

Recommended pollutant removal efficiencies, in percent, for dry swale BMPs. Sources. NOTE: removal efficiencies are 100 percent for water that is infiltrated.

TSS=total suspended solids; TP=total phosphorus; PP=particulate phosphorus; DP=dissolved phosphorus; TN=total nitrogen

TSS TP PP DP TN Metals Bacteria Hydrocarbons
68 link to table link to table link to table 35 80 0 80
image
Warning: Models are often selected to calculate credits. The model selected depends on your objectives. For compliance with the Construction Stormwater permit, the model must be based on the assumption that an instantaneous volume is captured by the BMP.

Credit refers to the quantity of stormwater or pollutant reduction achieved either by an individual best management practice (BMP) or cumulatively with multiple BMPs. Stormwater credits are a tool for local stormwater authorities who are interested in

This page provides a discussion of how dry swales can achieve stormwater credits. Swales with and without underdrains are both discussed, with separate sections for each type of system as appropriate.

Overview

schematic of dry swale
Schematic showing characteristics of a dry swale.

Dry swales, sometimes called grass swales, are similar to bioretention practices but are configured as shallow, linear channels. Dry swales function primarily as a conveyance BMP, but provide treatment of stormwater runoff, particularly when used in tandem with check dams that temporarily retain water in a series of cells. Dry swales with an underdrain and engineered media are considered a filtration practice. Dry swales with in-situ soils capable of infiltration, (A or B soils) are considered infiltration practices. Dry swales are designed to prevent standing water. Dry swales typically have vegetative cover such as turf or native perennial grasses.

Pollutant Removal Mechanisms

Dry swales without check dams or with underdrains primarily remove pollutants through filtration during conveyance of stormwater runoff. Dry swales may also provide some volume reduction benefits through infiltration and evapotranspiration during conveyance or below an underdrain. Water quality treatment is also recognized through biological and microbiological uptake, and soil adsorption. Check dams] may be incorporated into dry swale design to enhance infiltration.

Location in the Treatment Train

Dry swales may be located throughout a treatment train, including the main form of conveyance between or out of BMPs, at the end of a treatment train, or designed as off-line configurations where the Water Quality Volume is diverted to the filtration or infiltration practice. In any case, the practice may be applied as part of a stormwater management system to achieve one or more of the following objectives.

  • reduce stormwater pollutants (filtration or infiltration practices)
  • increase groundwater recharge (infiltration practices)
  • decrease runoff peak flow rates (filtration or infiltration practices)
  • decrease the volume of stormwater runoff (infiltration practices)
  • preserve baseflow in streams (infiltration practices)
  • reduce thermal impacts of runoff (filtration or infiltration practices)

Methodology for calculating credits

This section describes the basic concepts and equations used to calculate credits for volume, Total Suspended Solids (TSS) and Total Phosphorus (TP). Specific methods for calculating credits are discussed later in this article.

Dry swale practices generate credits for volume, TSS,and TP. Dry swale practices with an underdrain do not substantially reduce the volume of runoff but may qualify for a partial volume credit as a result of evapotranspiration, infiltration occurring through the sidewalls above the underdrain, and infiltration below the underdrain piping. Dry swale practices are effective at reducing concentrations of other pollutants including metals and hydrocarbons. They are generally not effective at removing bacteria. This article does not provide information on calculating credits for pollutants other than TSS and TP, but references are provided that may be useful for calculating credits for other pollutants.

Assumptions and Approach

In developing the credit calculations, it is assumed the swale is properly designed, constructed, and maintained in accordance with the Minnesota Stormwater Manual. If any of these assumptions is not valid, the BMP may not qualify for credits or credits should be reduced based on reduced ability of the BMP to achieve volume or pollutant reductions. For guidance on design, construction, and maintenance, see the appropriate article within the Manual.

Warning: Pretreatment is required for all filtration and infiltration practices

Unlike other BMPs such as bioretention and permeable pavement, credits for swales are calculated in two ways. First, if check dams are incorporated into the design, the water quality volume (VWQ) is assumed to be delivered instantaneously to the BMP and stored as water ponded behind the check dam, above the soil or filter media, and below the overflow point of the check dam. VWQ can vary depending on the stormwater management objective(s). For construction stormwater, VWQ is 1 inch times new impervious surface area. For MIDS, the VWQ is 1.1 inches times impervious surface area.

Second, if check dams are not incorporated into the swale, water will infiltrate into the underlying soil or filter media as it is conveyed along the swale. The amount of water captured in this manner is a function of the underlying soil permeability and the length of time flowing water is in contact with the soil, which in turn is affected by the slope of the swale.

Volume credit calculations - check dams and no underdrain

schematic swale no drain
Schematic illustrating terms and dimensions used for volume and pollutant calculations, no underdrain.

Volume credits are typically calculated based on the capacity of the BMP and its ability to permanently remove stormwater runoff from the existing stormwater collection system. When check dams are incorporated into the design, these credits are assumed to be instantaneous values entirely based on the capacity of the BMP for any storm event. Instantaneous volume reduction, or event based volume reduction of a BMP can be converted to annual volume reduction percentages using the MIDS calculator or other appropriate modeling tools.

Credits for dry swales with check dams are dependent on multiple design factors of the swale channel and side slopes, as well as infiltration rates for underlying soils. The water quality volume (Vwq) achieved behind each check dam ( instantaneous volume) is given by

\( V_{wq} = [h^2 * (h * H + B_w)]/(2S) \)

where

h = check dam height (inches);
H = horizontal component of the swale side slope (1 vertical : H horizontal)(unitless);
S = slope (unitless); and
Bw = channel bottom width (inches).

Convert the volume to cubic feet by dividing by 1728.

Add the Vwq for each check dam together to obtain the cumulative water quality volume for the swale.

For an example calculation, link here.

Some of the VWQ will be lost to evapotranspiration rather than all being lost to infiltration. In terms of a water quantity credit, this differentiation is unimportant, but it may be important if attempting to calculate actual infiltration into the underlying soil.

The annual volume captured and infiltrated by the BMP can be determined with appropriate modeling tools, including the MIDS calculator. Example values are shown below for a scenario using the MIDS calculator. For example, a permeable pavement system designed to capture 1 inch of runoff from impervious surfaces will capture 89 percent of annual runoff from a site with B (SM) soils.

Annual volume, expressed as a percent of annual runoff, treated by a BMP as a function of soil and Water Quality Volume. See footnote1 for how these were determined.
Link to this table

Soil Water quality volume (VWQ) (inches)
0.5 0.75 1.00 1.25 1.50
A (GW) 84 92 96 98 99
A (SP) 75 86 92 95 97
B (SM) 68 81 89 93 95
B (MH) 65 78 86 91 94
C 63 76 85 90 93

1Values were determined using the MIDS calculator. BMPs were sized to exactly meet the water quality volume for a 2 acre site with 1 acre of impervious, 1 acre of forested land, and annual rainfall of 31.9 inches.


Volume credit calculations - check dams with an underdrain

schematic swale no drain
Schematic illustrating terms and dimensions used for volume and pollutant calculations, with underdrain.
water loss mechanisms bioretention with raised underdrain
Schematic illustrating the different water loss terms for a swale (biofiltration) BMP with a raised underdrain.

Volume credit for a swale with check dams and an underdrain is the same as for a biofiltration BMP, although some of the BMP configurations differ somewhat. Volume credits are available only if the BMP permanently removes a portion of the stormwater runoff via infiltration through sidewalls or beneath the underdrain piping, or through evapotranspiration. These credits are assumed to be instantaneous values based on the design capacity of the BMP for a specific storm event. Instantaneous volume reduction, also termed event based volume reduction, can be converted to annual volume reduction percentages using the MIDS calculator or other appropriate modeling tools.

Volume credits for a dry swale with check dams and underdrains are calculated by a combination of infiltration through the unlined sides and bottom of the basin (the area below the underdrain), the volume loss through evapotranspiration (ET), and the retention volume below a raised underdrain, if applicable (this is based on the assumption that this stored water will infiltrate into the underlying soil). The main design variables impacting the volume credits include whether the underdrain is elevated above the native soils and if an impermeable liner on the sides or bottom of the basin is used. Other design variables include surface area at the check dam overflow, media top surface area, underdrain location, and basin bottom locations, total depth of media, soil water holding capacity, soil porosity (f), and design infiltration rate of underlying soils.

Information: For the following equations, units most commonly used in practice are given and unit correction factors are based on those units

The following calculations are for a single check dam. To get the total volume credit add the volumes for each check dam.

The volume credit (V) for a dry swale with a check dam and underdrain, in cubic feet, is given by

\( V = V_{inf_B} + V_{inf_s} + V_{ET} + V_U \)

where:

Vinfb = volume of infiltration through the bottom of the basin (cubic feet);
Vinfs = volume of infiltration through the sides of the basin (cubic feet);
VET = volume reduction due to evapotranspiration (cubic feet); and
VU = volume of water stored beneath the underdrain that will infiltrate into the underlying soil (cubic feet).

Volume credits for infiltration through the bottom of the basin (Vinfb) are accounted for only if the bottom of the basin is not lined. As long as water continues to draw down, some infiltration will occur through the bottom of the BMP. However, it is assumed that when an underdrain is included in the installation, the majority of water will be filtered through the media and exit through the underdrain. Because of this, the drawdown time is likely to be short. Volume credit for infiltration through the bottom of the basin is given by

\( V_{inf_B} = A_B\ DDT\ I_R/12 / 2 \)

where

IR = design infiltration rate of underlying soil (inches per hour);
AB = surface area at the bottom of the basin (square feet); and
DDT = drawdown time for ponded water (hours).

Because of the slope in a swale and the resulting unequal pool depth behind a check dam, a correction factor of 2 is included in the above equation.

Information: The MIDS calculator assigns a default value of 0.06 inches per hour, equivalent to a D soil, to IR. This is based on the assumption that most water will drain to the underdrain, but that some loss to underlying soil will occur. A conservative approach assuming a D soil was thus chosen.

The drawdown time is typically a maximum of 48 hours, which is designed to be protective of plants grown in the media. The Construction Stormwater permit requires drawdown within 48 hours and recommends 24 hours when discharges are to a trout stream. With a properly functioning underdrain, the drawdown time is likely to be considerably less than 48 hours.

Volume credit for infiltration through the sides of the basin is accounted for only if the sides of the basin are not lined with an impermeable liner. Volume credit for infiltration through the sides of the basin is given by

\( V_{inf_s} = (A_O - A_U)\ DDT\ I_R/12 \)

where

AO = the surface area at the overflow (square feet); and
AU = the surface area at the underdrain (square feet).
Information: The MIDS calculator assigns a default value of 0.06 inches per hour, equivalent to a D soil, to IR. This is based on the assumption that most water will drain to the underdrain, but that some loss to underlying soil will occur. A conservative approach assuming a D soil was thus chosen.

This equation assumes water will infiltrate through the entire sideslope area during the period when water is being drawn down. This is not the case, however, since the water level will decline in the BMP. The MIDS calculator assumes a linear drop in water level and thus divides the right hand term in the above equation by 2.

Volume credit for media storage capacity below the underdrain (VU) is accounted for only if the underdrain is elevated above the native soils. Volume credit for media storage capacity below the underdrain is given by

\( V_U = (n-FC)\ D_U\ (A_U + A_B)/2 \)

where

AB = surface area at the bottom of the media (square feet);
n = media porosity (cubic feet per cubic foot);
FC is the field capacity of the soil, in cubic feet per cubic foot; and
DU = the depth of media below the underdrain (feet).

This is an instantaneous volume. This will somewhat overestimate actual storage when the majority of water is being captured by the underdrains. This equation assumes water between the soil porosity and field capacity will infiltrate into the underlying soil.

The volume of water lost through ET is assumed to be the smaller of two calculated values: potential ET and measured ET. Potential ET (ETpot) is equal to the amount of water stored in the basin between field capacity and the wilting point. Measured ET (ETmea) is the amount of water lost to ET as measured using available data and is assumed to be 0.2 inches/day. ETmea is converted to ET by multiplying by a factor of 0.5. ET is considered to occur over a period equal to the drawdown time of the basin. Volume credit for evapotranspiration is given by the lesser of

\( ET_{mea} = (0.2/12)\ A\ 0.5\ t \) \( ET_{pot} = D\ A\ C_S \)

where

t = time over which ET is occurring (days);
D = depth being considered (feet);
A = area being considered (square feet); and
CS = soil water available for ET, generally assumed to be the water between field capacity and wilting point.

ET is likely to be greater if one or more trees is planted in the swale. The MIDS calculator increases the above ET credit by a factor of 3 when a tree is planted in the swale, but this credit is not available for swales. See Plants for swales for information about trees that might be acceptable in swales.

Provided soil water (moisture) content is greater than the wilting point, ET will continually occur during the non-frozen period. However, because the above volume calculations are event based, t will be equal to the time between rain events. In the MIDS calculator, a value of 3 days is used because this is the average number of days between precipitation events. ET will occur over the entire media depth. D may therefore be set equal to the media depth (DM). In this case, the value for A would be the average area through the entire depth of the media. The MIDS calculator limits ET to the area above the underdrain. If infiltration is being computed through the bottom and sidewalls of the basin, then CS would be field capacity minus the wilting point of soils (cubic feet per cubic foot) since water above the field capacity would infiltrate (or go to an underdrain).

The volume of water passing through underdrains can be determined by subtracting the volume loss (V) from the volume of water instantaneously captured by the BMP. No volume reduction credit is given for filtered stormwater that exits through the underdrain, but the volume of filtered water can be used in the calculation of pollutant removal credits through filtration.

The volume reduction credit (V) can be converted to an annual volume if desired. This conversion can be generated using the MIDS calculator or other appropriate modeling techniques. The MIDS calculator obtains the percentage annual volume reduction through performance curves developed from multiple modeling scenarios using the volume reduction capacity for swales, the infiltration rate of the underlying soils, and the contributing watershed size and imperviousness.

Volume credit calculations - no check dam

When a check dam is not incorporated into the design, water will infiltrate into the soil or media as it is conveyed along the swale. Volume credits for swales without check dams can be calculated using an appropriate model, such as the MIDS calculator or soil infiltration models (e.g. Green and Ampt).

Water quality credit calculations

Water quality credits applied to dry swales can be calculated by rainfall event or annual rainfall. This value is obtained from the infiltration and filtration volume capacity of the BMP (calculated above).

Total suspended solids

TSS reduction credits correspond with volume reduction through infiltration and filtration of water captured by the swale and are given by

\( M_{TSS} = M_{TSS_i} + M_{TSS_f} \)

where

MTSS = TSS removal (pounds);
MTSS_i = TSS removal from infiltrated water (pounds); and
MTSS_f = TSS removal from filtered water (pounds).

Pollutant removal for infiltrated water is assumed to be 100 percent. The event-based mass of pollutant removed through infiltration, in pounds, is given by

  • filtration (underdrain) - \( M_{TSS_i} = 0.0000624\ (V_{inf_b} + V_{inf_s} + V_U)\ EMC_{TSS} \)
  • infiltration - \( M_{TSS_i} = 0.0000624\ V_{WQ}\ EMC_{TSS} \)

where

EMCTSS is the event mean TSS concentration in runoff water entering the BMP (milligrams per liter).

The EMCTSS entering the BMP is a function of the contributing land use and treatment by upstream tributary BMPs. For more information on EMC values for TSS, link here or here.

Removal for the filtered portion is less than 100 percent. The event-based mass of pollutant removed through filtration, in pounds, is given by

\( M_{TSS_f} = 0.0000624\ (V_{total} - (V_{inf_b} + V_{inf_s} + V_U))\ EMC_{TSS}\ R_{TSS} \)

where

Vtotal is the total volume of water captured by the BMP (cubic feet); and
RTSS is the TSS pollutant removal percentage for filtered runoff.

The Stormwater Manual provides a recommended value for RTSS of 0.68 (68 percent) removal for filtered water. Alternate justified percentages for TSS removal can be used if proven to be applicable to the BMP design.

The above calculations may be applied on an event or annual basis and are given by

\( M_{TSS_f} = 2.72\ F\ V_{F_{annual}}\ EMC_{TSS}\ R_{TSS} \)

where

F is the fraction of annual volume filtered through the BMP; and
Vannual is the annual volume treated by the BMP, in acre-feet.

Total phosphorus

Total phosphorus (TP) reduction credits correspond with volume reduction through infiltration and filtration of water captured by the swale and are given by

\( M_{TP} = M_{TP_i} + M_{TP_f} \)

where

  • MTP = TP removal (pounds);
  • MTP_i = TP removal from infiltrated water (pounds); and
  • MTP_f = TP removal from filtered water (pounds).

Pollutant removal for infiltrated water is assumed to be 100 percent. The mass of pollutant removed through infiltration, in pounds, is given by

  • filtration (underdrain) - \( M_{TP_i} = 0.0000624\ (V_{inf_b} + V_{inf_s} + V_U)\ EMC_{TP} \)
  • infiltration - \( M_{TP_i} = 0.0000624\ V_{WQ} \ EMC_{TP} \)

where

  • EMCTP is the event mean TP concentration in runoff water entering the BMP (milligrams per liter).

The EMCTP entering the BMP is a function of the contributing land use and treatment by upstream tributary BMPs.

The filtration credit for TP in a swale with underdrains assumes removal rates based on the soil media mix used and the presence or absence of amendments. Soil mixes with more than 30 mg/kg phosphorus (P) content are likely to leach phosphorus and do not qualify for a water quality credit. If the soil phosphorus concentration is less than 30 mg/kg, the mass of phosphorus removed through filtration, in pounds, is given by

\( M_{TP_f} = 0.0000624\ (V_{total} - (V_{inf_b} + V_{inf_s} + V_U))\ EMC_{TP}\ R_{TP} \)

Information: Soil mixes C and D are assumed to contain less than 30 mg/kg of phosphorus and therefore do not require testing

Again, assuming the phosphorus content in the media is less than 30 milligrams per kilogram, the removal efficiency (RTP) provided in the Stormwater Manual is a function of the fraction of phosphorus that is in particulate or dissolved form, the depth of the media, and the presence or absence of soil amendments. For the purpose of calculating credits it can be assumed that TP in storm water runoff consists of 55 percent particulate phosphorus (PP) and 45 percent dissolved phosphorus (DP). The removal efficiency for particulate phosphorus is 68 percent. The removal efficiency for dissolved phosphorus is 20 percent if the media depth is 2 feet or greater. The efficiency decreases by 1 percent for each 0.1 foot decrease in media thickness below 2 feet. If a soil amendment is added to the BMP design, an additional 40 percent credit is applied to dissolved phosphorus. Thus, the overall removal efficiency, (RTP), expressed as a percent removal of total phosphorus, is given by

\( R_{TP} = (0.68 * 0.55) + (0.45 * ((0.2 * (D_{MU_{max=2}})/2) + 0.40_{if amendment is used})) * 100 \)

where

  • the first term on the right side of the equation represents the removal of particulate phosphorus;
  • the second term on the right side of the equation represents the removal of dissolved phosphorus; and
  • DMUmax=2 = the media depth above the underdrain, up to a maximum of 2 feet.

The assumption of 55 percent particulate phosphorus and 45 percent dissolved phosphorus is likely inaccurate for certain land uses, such as industrial, transportation, and some commercial areas. Studies indicate particulate phosphorus comprises a greater percent of total phosphorus in these land uses. It may therefore be appropriate to modify the above equation with locally derived ratios for particulate and dissolved phosphorus. For more information on fractionation of phosphorus in stormwater runoff, link here.

Methods for calculating credits

This section provides specific information on generating and calculating credits from swale BMPS for volume, Total Suspended Solids (TSS) and Total Phosphorus (TP). Stormwater runoff volume and pollution reductions (“credits”) may be calculated using one of the following methods:

Credits based on models

Warning: The model selected depends on your objectives. For compliance with the Construction Stormwater permit, the model must be based on the assumption that an instantaneous volume is captured by the BMP.

Users may opt to use a water quality model or calculator to compute volume, TSS and/or TP pollutant removal for the purpose of determining credits for dry swales. The available models described in the following sections are commonly used by water resource professionals, but are not explicitly endorsed or required by the Minnesota Pollution Control Agency.

Use of models or calculators for the purpose of computing pollutant removal credits should be supported by detailed documentation, including:

  1. Model name and version
  2. Date of analysis
  3. Person or organization conducting analysis
  4. Detailed summary of input data
  5. Calibration and verification information
  6. Detailed summary of output data

The following table lists water quantity and water quality models that are commonly used by water resource professionals to predict the hydrologic, hydraulic, and/or pollutant removal capabilities of a single or multiple stormwater BMPs. The table can be used to guide a user in selecting the most appropriate model for computing volume, TSS, and/or TP removal for constructed basin BMPs. In using this table to identify models appropriate for constructed ponds and wetlands, use the sort arrow on the table and sort by Constructed Basin BMPs. Models identified with an X may be appropriate for using with constructed basins.

Comparison of stormwater models and calculators. Additional information and descriptions for some of the models listed in this table can be found at this link. Note that the Construction Stormwater General Permit requires the water quality volume to be calculated as an instantaneous volume, meaning several of these models cannot be used to determine compliance with the permit.
Link to this table
Access this table as a Microsoft Word document: File:Stormwater Model and Calculator Comparisons table.docx.

Model name BMP Category Assess TP removal? Assess TSS removal? Assess volume reduction? Comments
Constructed basin BMPs Filter BMPs Infiltrator BMPs Swale or strip BMPs Reuse Manu-
factured devices
Center for Neighborhood Technology Green Values National Stormwater Management Calculator X X X X No No Yes Does not compute volume reduction for some BMPs, including cisterns and tree trenches.
CivilStorm Yes Yes Yes CivilStorm has an engineering library with many different types of BMPs to choose from. This list changes as new information becomes available.
EPA National Stormwater Calculator X X X No No Yes Primary purpose is to assess reductions in stormwater volume.
EPA SWMM X X X Yes Yes Yes User defines parameter that can be used to simulate generalized constituents.
HydroCAD X X X No No Yes Will assess hydraulics, volumes, and pollutant loading, but not pollutant reduction.
infoSWMM X X X Yes Yes Yes User defines parameter that can be used to simulate generalized constituents.
infoWorks ICM X X X X Yes Yes Yes
i-Tree-Hydro X No No Yes Includes simple calculator for rain gardens.
i-Tree-Streets No No Yes Computes volume reduction for trees, only.
LSPC X X X Yes Yes Yes Though developed for HSPF, the USEPA BMP Web Toolkit can be used with LSPC to model structural BMPs such as detention basins, or infiltration BMPs that represent source control facilities, which capture runoff from small impervious areas (e.g., parking lots or rooftops).
MapShed X X X X Yes Yes Yes Region-specific input data not available for Minnesota but user can create this data for any region.
MCWD/MWMO Stormwater Reuse Calculator X Yes No Yes Computes storage volume for stormwater reuse systems
Metropolitan Council Stormwater Reuse Guide Excel Spreadsheet X No No Yes Computes storage volume for stormwater reuse systems. Uses 30-year precipitation data specific to Twin Cites region of Minnesota.
MIDS Calculator X X X X X X Yes Yes Yes Includes user-defined feature that can be used for manufactured devices and other BMPs.
MIKE URBAN (SWMM or MOUSE) X X X Yes Yes Yes User defines parameter that can be used to simulate generalized constituents.
P8 X X X X Yes Yes Yes
PCSWMM X X X Yes Yes Yes User defines parameter that can be used to simulate generalized constituents.
PLOAD X X X X X Yes Yes No User-defined practices with user-specified removal percentages.
PondNet X Yes No Yes Flow and phosphorus routing in pond networks.
PondPack X [ No No Yes PondPack can calculate first-flush volume, but does not model pollutants. It can be used to calculate pond infiltration.
RECARGA X No No Yes
SHSAM X No Yes No Several flow-through structures including standard sumps, and proprietary systems such as CDS, Stormceptors, and Vortechs systems
SUSTAIN X X X X X Yes Yes Yes Categorizes BMPs into Point BMPs, Linear BMPs, and Area BMPs
SWAT X X X Yes Yes Yes Model offers many agricultural BMPs and practices, but limited urban BMPs at this time.
Virginia Runoff Reduction Method X X X X X X Yes No Yes Users input Event Mean Concentration (EMC) pollutant removal percentages for manufactured devices.
WARMF X X Yes Yes Yes Includes agriculture BMP assessment tools. Compatible with USEPA Basins
WinHSPF X X X Yes Yes Yes USEPA BMP Web Toolkit available to assist with implementing structural BMPs such as detention basins, or infiltration BMPs that represent source control facilities, which capture runoff from small impervious areas (e.g., parking lots or rooftops).
WinSLAMM X X X X Yes Yes Yes
XPSWMM X X X Yes Yes Yes User defines parameter that can be used to simulate generalized constituents.


The Simple Method and MPCA Estimator

The Simple Method is a technique used for estimating storm pollutant export delivered from urban development sites. Pollutant loads are estimated as the product of event mean concentration and runoff depths over specified periods of time (usually annual or seasonal). The method was developed to provide an easy yet reasonably accurate means of predicting the change in pollutant loadings in response to development. Ohrel (2000) states: "In general, the Simple Method is most appropriate for small watersheds (<640 acres) and when quick and reasonable stormwater pollutant load estimates are required". Rainfall data, land use (runoff coefficients), land area, and pollutant concentration are needed to use the Simple Method. For more information on the Simple Method, see The Simple method to Calculate Urban Stormwater Loads or The Simple Method for estimating phosphorus export.

Some simple stormwater calculators utilize the Simple Method (EPA STEPL, Watershed Treatment Model). The MPCA developed a simple calculator for estimating load reductions for TSS, total phosphorus, and bacteria. Called the MPCA Estimator, this tool was developed specifically for complying with the MS4 General Permit TMDL annual reporting requirement. The MPCA Estimator provides default values for pollutant concentration, runoff coefficients for different land uses, and precipitation, although the user can modify these and is encouraged to do so when local data exist. The user is required to enter area for different land uses and area treated by BMPs within each of the land uses. BMPs include infiltrators (e.g. bioinfiltration, infiltration basin, tree trench, permeable pavement, etc.), filters (biofiltration, sand filter, green roof), constructed ponds and wetlands, and swales/filters. The MPCA Estimator includes standard removal efficiencies for these BMPs, but the user can modify those values if better data are available. Output from the calculator is given as a load reduction (percent, mass, or number of bacteria) from the original estimated load.

Caution: The MPCA Estimator should not be used for modeling a stormwater system or selecting BMPs.

Because the MPCA Estimator does not consider BMPs in series, makes simplifying assumptions about runoff and pollutant removal processes, and uses generalized default information, it should only be used for estimating pollutant reductions from an estimated load. It is not intended as a decision-making tool.

Download MPCA Estimator here

MIDS Calculator

mids logo
Download the MIDS Calculator

The Minimal Impact Design Standards (MIDS) best management practice (BMP) calculator is a tool used to determine stormwater runoff volume and pollutant reduction capabilities of various low impact development (LID) BMPs. The MIDS calculator estimates the stormwater runoff volume reductions for various BMPs and annual pollutant load reductions for total phosphorus (including a breakdown between particulate and dissolved phosphorus) and total suspended solids (TSS). The calculator was intended for use on individual development sites, though capable modelers could modify its use for larger applications.

The MIDS calculator is designed in Microsoft Excel with a graphical user interface (GUI), packaged as a windows application, used to organize input parameters. The Excel spreadsheet conducts the calculations and stores parameters, while the GUI provides a platform that allows the user to enter data and presents results in a user-friendly manner.

Detailed guidance has been developed for all BMPs in the calculator, including swales. An overview of individual input parameters and workflows is presented in the MIDS Calculator User Documentation.

Credits Based on Reported Literature Values

A simplified approach to computing a credit would be to apply a reduction value found in literature to the pollutant mass load or event mean concentration (EMC) of the dry swale. A more detailed explanation of the differences between mass load reductions and EMC reductions can be found here.

Designers may use the pollutant reduction values reported here or may research values from other databases and published literature.

Designers who opt for this approach should:

  • Select the median value from pollutant reduction databases that report a range of reductions, such as from the International BMP Database.
  • Select a pollutant removal reduction from literature that studied a dry swale device with site characteristics and climate similar to the device being considered for credits.
  • When using data from an individual study, review the article to determine that the design principles of the studied dry swale are close to the design recommendations for Minnesota, as described here, and/or by a local permitting agency.
  • Preference should be given to literature that has been published in a peer-reviewed publication.

The following references summarize pollutant reduction values from multiple studies or sources that could be used to determine credits. Users should note that there is a wide range of monitored pollutant removal effectiveness in the literature. Before selecting a literature value, users should compare the characteristics of the monitored site in the literature against the characteristics of the proposed dry swale, considering such conditions as watershed characteristics, swale sizing, and climate factors.

Credits Based on Field Monitoring

Field monitoring may be used to calculate stormwater credits in lieu of desktop calculations or models/calculators as described. Careful planning is HIGHLY RECOMMENDED before commencing a program to monitor the performance of a BMP. The general steps involved in planning and implementing BMP monitoring include the following.

  1. Establish the objectives and goals of the monitoring.
    1. Which pollutants will be measured?
    2. Will the monitoring study the performance of a single BMP or multiple BMPs?
    3. Are there any variables that will affect the BMP performance? Variables could include design approaches, maintenance activities, rainfall events, rainfall intensity, etc.
    4. Will the results be compared to other BMP performance studies?
    5. What should be the duration of the monitoring period? Is there a need to look at the annual performance vs the performance during a single rain event? Is there a need to assess the seasonal variation of BMP performance?
  2. Plan the field activities. Field considerations include:
    1. Equipment selection and placement
    2. Sampling protocols including selection, storage, delivery to the laboratory
    3. Laboratory services
    4. Health and Safety plans for field personnel
    5. Record keeping protocols and forms
    6. Quality control and quality assurance protocols
  3. Execute the field monitoring
  4. Analyze the results

The following guidance manuals have been developed to assist BMP owners and operators on how to plan and implement BMP performance monitoring.

Urban Stormwater BMP Performance Monitoring

Geosyntec Consultants and Wright Water Engineers prepared this guide in 2009 with support from the USEPA, Water Environment Research Foundation, Federal Highway Administration, and the Environment and Water Resource Institute of the American Society of Civil Engineers. This guide was developed to improve and standardize the protocols for all BMP monitoring and to provide additional guidance for Low Impact Development (LID) BMP monitoring. Highlighted chapters in this manual include:

  • Chapter 2: Designing the Program
  • Chapters 3 & 4: Methods and Equipment
  • Chapters 5 & 6: Implementation, Data Management, Evaluation and Reporting
  • Chapter 7: BMP Performance Analysis
  • Chapters 8, 9, & 10: LID Monitoring
Evaluation of Best Management Practices for Highway Runoff Control (NCHRP Report 565)

AASHTO (American Association of State Highway and Transportation Officials) and the FHWA (Federal Highway Administration) sponsored this 2006 research report, which was authored by Oregon State University, Geosyntec Consultants, the University of Florida, and the Low Impact Development Center. The primary purpose of this report is to advise on the selection and design of BMPs that are best suited for highway runoff. The document includes the following chapters on performance monitoring that may be a useful reference for BMP performance monitoring, especially for the performance assessment of a highway BMP:

  • Chapter 4: Stormwater Characterization
    • 4.2: General Characteristics and Pollutant Sources
    • 4.3: Sources of Stormwater Quality data
  • Chapter 8: Performance Evaluation
    • 8.1: Methodology Options
    • 8.5: Evaluation of Quality Performance for Individual BMPs
    • 8.6: Overall Hydrologic and Water Quality Performance Evaluation
  • Chapter 10: Hydrologic Evaluation
    • 10.5: Performance Verification and Design Optimization
Investigation into the Feasibility of a National Testing and Evaluation Program for Stormwater Products and Practices.

In 2014 the Water Environment Federation released this White Paper that investigates the feasibility of a national program for the testing of stormwater products and practices. The information contained in this White Paper would be of use to those considering the monitoring of a manufactured BMP. The report does not include any specific guidance on the monitoring of a BMP, but it does include a summary of the existing technical evaluation programs that could be consulted for testing results for specific products (see Table 1 on page 8).

Caltrans Stormwater Monitoring Guidance Manual (Document No. CTSW-OT-13-999.43.01)

The most current version of this manual was released by the State of California, Department of Transportation in November 2013. As with the other monitoring manuals described, this manual does include guidance on planning a stormwater monitoring program. However, this manual is among the most thorough for field activities. Relevant chapters include:

  • Chapter 4: Monitoring Methods and Equipment
  • Chapter 5: Analytical Methods and Laboratory Selection
  • Chapter 6: Monitoring Site Selection
  • Chapter 8: Equipment Installation and Maintenance
  • Chapter 10: Pre-Storm Preparation
  • Chapter 11: Sample Collection and Handling
  • Chapter 12: Quality Assurance / Quality Control
  • Chapter 13: Laboratory Reports and Data Review
  • Chapter 15: Gross Solids Monitoring
Optimizing Stormwater Treatment Practices: A Handbook of Assessment and Maintenance

This online manual was developed in 2010 by Andrew Erickson, Peter Weiss, and John Gulliver from the University of Minnesota and St. Anthony Falls Hydraulic Laboratory with funding provided by the Minnesota Pollution Control Agency. The manual advises on a four-level process to assess the performance of a Best Management Practice.

Level 1 activities do not produce numerical performance data that could be used to obtain a stormwater management credit. BMP owners and operators who are interested in using data obtained from Levels 2 and 3 should consult with the MPCA or other regulatory agency to determine if the results are appropriate for credit calculations. Level 4, Monitoring, is the method most frequently used for assessment of the performance of a BMP.

Use these links to obtain detailed information on the following topics related to BMP performance monitoring:

Other pollutants

According to the International BMP Database, studies have shown dry swales are effective at reducing concentration of other pollutants as well including solids, bacteria, metals, and nutrients. This database provides an overview of BMP performance in relation to various pollutant categories and constituents that were monitored in BMP studies within the database. The report notes that effectiveness and range of unit treatment processes can vary greatly depending on BMP design and location. Table 3-4 shows a list of the constituents and associated pollutant category for the monitored “media filters” data. The constituents shown all had data representing decreases in effluent pollutant loads for the median of the data points and the 95% confidence interval about the median. If dry swale design utilizes a bioretention base, additional pollutant removals may be applicable as well (For more information see the bioretention credit article ). Pollutant removal percentages for dry swale BMPs can also be found on the WIKI page.

Dry swale pollutant load reduction
Link to this table

Pollutant Category Constituent Treatment Capabilities

(Low = < 30%; Medium = 30-65%;

High = 65 -100%)
Metals1 Cd, Cr, Cu, Zn Medium
As2,Fe, Ni, Pb Medium/High
Nutrients Total Nitrogen, TKN Low
Bacteria Fecal Coliform, E. coli Low
Organics Medium

1Results are for total metals only
2Information on As was found only in the International Stormwater Database where removal was found to be low


References and suggested reading

  • Ahearn, Dylan, and Richard Tveten. "Legacy LID: Stormwater Treatment in Unimproved Embankments along Highway Shoulders in Western Washington." In Proceedings of the 2008 International Low Impact Development (LID) Conference, pp. 16-19. 2008.
  • Barrett, Michael E., Michael Vincent Keblin, Patrick M. Walsh, Joseph F. Malina Jr, and Randall J. Charbeneau. Evaluation of the performance of permanent runoff controls: summary and conclusions. No. TX-99/2954-3F,. 1998.
  • Barrett, Michael E., Patrick M. Walsh, Joseph F. Malina Jr, and Randall J. Charbeneau. "Performance of vegetative controls for treating highway runoff." Journal of environmental engineering 124, no. 11 (1998): 1121-1128.
  • Barrett, Michael, Anna Lantin, and Steve Austrheim-Smith. "Storm water pollutant removal in roadside vegetated buffer strips." Transportation Research Record: Journal of the Transportation Research Board 1890, no. 1 (2004): 129-140.
  • Bureau of Environmental Services. 2006. Effectiveness Evaluation of Best Management Practices for Stormwater Management in Portland, Oregon. Bureau of Environmental Services, Portland, Oregon.
  • California Stormwater Quality Association. "California Stormwater BMP Handbook-New Development and Redevelopment." California Stormwater Quality Association, Menlo Park, CA (2003).
  • Caltrans. 2004. BMP Retrofit Pilot Program Final Report, Report No., CTSW-RT-01-050. Division of Environmental Analysis, California Dept. of Transportation, Sacramento, CA
  • CDM Smith. 2012. Omaha Regional Stormwater Design Manual Chapter 8 Stormwater Best Management Practices. Kansas City, MO.
  • Dorman, M. E., H. Hartigan, F. Johnson, and B. Maestri. Retention, detention, and overland flow for pollutant removal from highway stormwater runoff: interim guidelines for management measures. Final report, September 1985-June 1987. No. PB-89-133292/XAB.
  • Consultants, Geosyntec, and Wright Water Engineers. "Urban stormwater BMP performance monitoring." (2002).
  • Leisenring, M., J. Clary, and P. Hobson. "International Stormwater Best Management Practices (BMP) Database Pollutant Category Summary Statistical Addendum: TSS, Bacteria, Nutrients, and Metals July 2012." (2012): 1-31.
  • Gulliver, J. S., A. J. Erickson, and PTe Weiss. "Stormwater treatment: Assessment and maintenance." University of Minnesota, St. Anthony Falls Laboratory. Minneapolis, MN. (2010).
  • Guo, James CY, Gerald E. Blackler, T. Andrew Earles, and Ken MacKenzie. "Incentive index developed to evaluate storm-water low-impact designs." Journal of Environmental Engineering 136, no. 12 (2010): 1341-1346.
  • Harper, Harvey H. "Effects of stormwater management systems on groundwater quality." FDEP Project# WM190. Florida Department of Environmental Regulation, Tallahassee, FL (1988).
  • Jaffe, et. al. 2010. The Illinois Green Infrastructure Study. Prepared by the University of Illinois at Chicago, Chicago Metropolitan Agency for Planning, Center for Neighborhood Technology, Illinois-Indiana Sea Grant.
  • Jurries, Dennis. "Biofilters (Bioswales, Vegetative Buffers, & Constructed Wetlands) for Storm Water Discharge Pollution Removal." Quality, S. o. OD o. E.(Ed.).
  • Kearfott, Pamela J., Michael E. Barrett, and Joseph F. Malina. Stormwater quality documentation of roadside shoulders borrow ditches. Center for Research in Water Resources, University of Texas at Austin, 2005.
  • Kim, Yun Ki, and Seung Rae Lee. "Field infiltration characteristics of natural rainfall in compacted roadside slopes." Journal of geotechnical and geoenvironmental engineering 136, no. 1 (2009): 248-252.
  • Leisenring, M., J. Clary, and P. Hobson. "International Stormwater Best Management Practices (BMP) Database Pollutant Category Summary Statistical Addendum: TSS, Bacteria, Nutrients, and Metals July 2012." (2012): 1-31.
  • New Hampshire Department of Environmental Services. 2008. New Hampshire Stormwater Manual. Volume 2 Appendix B. Concord, NH.
  • Transportation Officials, Oregon State University. Dept. of Civil, Environmental Engineering, University of Florida. Dept. of Environmental Engineering Sciences, GeoSyntec Consultants, and Low Impact Development Center, Inc. Evaluation of Best Management Practices for Highway Runoff Control. No. 565. Transportation Research Board, 2006.
  • State of California, Department of Transportation. 2013. Caltrans Stormwater Monitoring Guidance Manual. Sacramento, CA.
  • TetraTech. 2008. BMP Performance Analysis. Prepared for US EPA Region 1, Boston, MA.
  • Torres, Camilo. "Characterization and Pollutant Loading Estimation for Highway Runoff in Omaha, Nebraska." (2010).
  • Water Environment Federation. 2014. Investigation into the Feasibility of a National Testing and Evaluation Program for Stormwater Products and Practices. A White Paper by the National Stormwater Testing and Evaluation of Products and Practices (STEPP) Workgroup Steering Committee.
  • WEF, ASCE/EWRI. 2012. Design of Urban Stormwater Controls, WEF Manual of Practice No. 23, ASCE/EWRI Manuals and Reports on Engineering Practice No. 87. Prepared by the Design of Urban Stormwater Controls Task Forces of the Water Environment Federation and the American Society of Civil Engineers/Environmental & Water Resources Institute.
  • Weiss, Peter T., John S. Gulliver, and Andrew J. Erickson. "The Cost and Effectiveness of Stormwater Management Practices Final Report." (2005).


Related articles

This page was last edited on 29 December 2022, at 13:52.