Overview of models used to meet MS4 TMDL permit requirements
This site is currently undergoing revision. For more information, open this link.
This page is in development. Anticipated completion is mid-September, 2019
This page is in development. Anticipated completion is mid-September, 2019
Many water quality models can be used to demonstrate permit compliance. Based on a survey of permittees, the following four models are commonly used for assessing or demonstrating TMDL permit compliance.
- Program for Predicting Polluting Particle Passage thru Pits, Puddles, & Ponds (P8; Walker, 1990)
- Minimal Impact Design Standards Calculator (MIDS Calculator; MPCA, 2017)
- Minnesota Pollution Control Agency Simple Estimator (MPCA Simple Estimator; MPCA, 2015)
- Source Loading and Management Model for Windows (WinSLAMM; Pitt and Voorhees, 2002)
We developed guidance for using these four models to meet permit requirements. Model guidance for each of the four models is provided on separate pages (P8; WinSLAMM; MIDS calculator; MPCA Simple Estimator), or can be viewed as a single document containing guidance for all four models.
Individual MS4 permittees can use the summary information in the following tables to determine which model is most-suitable for demonstrating permit compliance based on circumstances unique to the MS4 and given WLA requirements.
- TMDL model description and overview: A brief description of each model and its applicability for demonstrating permit compliance
- TMDL model comparison matrix: A matrix comparing general model capabilities and relative complexity
- Water quality BMP comparison matrix for TMDL models: A list of water quality best management practices (BMPs) which can be modeled in each program and a description of BMP types which are specifically included as a unique BMP type with unique BMP parameterization (i.e., “specific”) and which BMPs are not specifically included but can be modeled using general or user-defined model inputs (i.e., “general”).
Costs to develop the models should generally range between $5,000 and $20,000 for evaluating compliance with TSS or TP TMDL WLAs that involve approximately ten BMPs in ten subwatersheds for five or fewer outfalls draining to an impaired water body.
TMDL model description and overview
Link to this table
| Model | Model description | Applicability for Permit Compliance and Reporting |
|---|---|---|
| P8 | P8 is a physically-based water quality model which simulates the generation and transport of sediment and associated pollutants from urban watersheds. The model is capable of predicting sediment particulate removal of five (5) particle sizes (including one soluble fraction) and associated pollutants at a variety of BMP types. | P8 is an acceptable model for demonstrating compliance with TSS and TP WLAs. |
| MIDS calculator | The MIDS Calculator is an Excel-based stormwater quality tool used to estimate runoff and pollutant removal at a variety of stormwater BMPs. The model was originally developed by the MPCA to assist designers and regulators evaluate conformance to MIDS performance goals for development-scale models. The MIDS Calculator is an empirical model which predicts pollutant removal based on correlation to P8 results and design-standard BMP removal rates from literature. | MIDS calculator is an acceptable model for demonstrating compliance with annualized TSS and TP WLAs for simplified study areas. Specifically, the tool is limited in its ability to evaluate bypass from undersized BMPs and predict pollutant removal through non-volume reduction BMPs in series. |
| MPCA Simple Estimator | The MPCA Simple Estimator is a spreadsheet-based tool that utilizes the Simple Method to estimate land use based pollutant loading from urban watersheds. The empirically-based model estimates pollutant removal from nine (9) BMP types based on design-standard BMP removal rates from literature. | The MPCA Simple Estimator is an acceptable model for demonstrating compliance with annualized TSS and TP WLAs for simplified study areas. The tool is not capable of evaluating bypass from undersized BMPs or pollutant removal through BMPs in series. |
| WinSLAMM | WinSLAMM is a water quality model originally developed for the USGS to evaluate nonpoint pollution in urban areas. The model predicts pollutant loading from a variety of land use and impervious area types and calculates pollutant reduction at a variety of control devices (BMPs). Pollutant reduction at control devices is based both on experimental field results (empirical) and tracking of particulate settling and filtration (physically-based). | WinSLAMM is an acceptable model for demonstrating compliance with TSS and TP WLAs. |
TMDL model comparison matrix
Link to this table
| Comparison categories | Water quality model | |||
|---|---|---|---|---|
| P8 | MIDS calculator | MPCA Simple Estimator | WinSLAMM | |
| Relative input complexity | High | Medium | Low | High |
| Public domain | Yes | Yes | Yes | No |
| TSS modeled | Yes | Yes | Yes | Yes |
| TP modeled | Yes | Yes | Yes | Yes |
| Volume reduction modeled | Yes | Yes | Yes | Yes |
| Model time step | Event/continuous | Annual | Annual | Event |
| Pollutant Loading Methodology | EMC & Buildup/ Wash-off | Simple method | Simple method | EMC & Buildup/ Wash-off |
| Pollutant removal methodology | Physically based | Empirical | Empirical | Physically-based / Empirical |
| Pollutant Removal Mechanisms | Filtration, Sedimentation, Infiltration | Empirically based | Empirically based | Filtration, Sedimentation, Infiltration |
| Capable of evaluating bypass from undersized BMPs? | Yes | Only for volume-reduction BMPs | No | Yes |
| Capable of modeling removal from BMPs in series? | Yes | Only for volume-reduction BMPs | No | Yes |
| GIS compatibility | Low | Low | Low | Medium |
| Model used for TMDL Development and Modeling | Yes | No | No | Yes |
| Costs - software | None | None | None | medium |
| Costs - model development | Medium | Low | Low | High |
Water quality BMP comparison matrix for TMDL models
Link to this table
| Water quality BMP | BMP included in model1 | |||
|---|---|---|---|---|
| P8 | MIDS calculator | MPCA Simple Estimator | WinSLAMM | |
| Bioretention, Infiltration / Filtration | General | Specific | Specific | Specific |
| Bioswale, Infiltration / Filtration | Specific | Specific | Specific | Specific |
| Cistern (e.g., Rain Barrel) | General | Specific | Specific | |
| Constructed Wetland | General | Specific | Specific | General |
| Detention Basin, Dry | Specific | Specific | ||
| Detention Basin, Wet | Specific | Specific | Specific | Specific |
| Grass Buffer / Filter Strip | Specific | Specific | Specific | Specific |
| Green roof | General | Specific | Specific | Specific |
| Hydrodynamic Separator / Grit Chamber2 | General | Specific | ||
| Infiltration Basin | Specific | Specific | Specific | Specific |
| Other (i.e., user-defined BMP) | General | Specific | Specific | Specific |
| Permeable Pavement | General | Specific | Specific | Specific |
| Rain garden | Specific | Specific | Specific | Specific |
| Sand filter | General | Specific | Specific | Specific |
| Sand Filter, Iron-Enhanced | General | Specific | General | General |
| Street cleaning | Specific | Specific | ||
| Tree Trench / Planter | General | Specific | General | |
| Underground Infiltration / Filtration | General | Specific | General | General |
1"Specific" = BMP type distinctly included in model; "General" = BMP can be modeled but is not distinctly included as a unique BMP type; and "--" = BMP cannot be modeled.
2Typically used as a pretreatment practice.