Category:Level 3 - Models and modeling/Specific models/MPCA Simple Estimator
The MPCA Estimator spreadsheet presents a calculator approach to computing pollutant loading and the pollutant load reduction for total phosphorus (TP) and total suspended solids (TSS)(Note: the Estimator may not be used for any other pollutants). For MS4 permittees reporting on TMDL wasteload allocations (WLAs), results from the Estimator can be used in the Cumulative reductions tab of the Annual Report form. The Estimator applies load reductions to specific structural stormwater BMPs but can be used to estimate reductions associated with other BMPs such as street sweeping, impervious surface disconnection, and changes in land use. It is a simplistic tool and should not be used for modeling a stormwater system or selecting BMPs.
This page provides links to pages that provide information related to the MPCA Simple Estimator
Pages in category "Level 3 - Models and modeling/Specific models/MPCA Simple Estimator"
The following 7 pages are in this category, out of 7 total.
G
M
Media in category "Level 3 - Models and modeling/Specific models/MPCA Simple Estimator"
The following 12 files are in this category, out of 12 total.
Group 1 analysis.xlsx ; 271 KB
- Group 2 analysis.xlsx ; 271 KB
- Group 3 analysis.xlsx ; 271 KB
- MPCA Estimator-2.xlsx ; 41 KB
- MPCA Estimator.xlsx ; 40 KB
This page was last edited on 29 December 2022, at 14:59.