m (→I) |
m (→D) |
||
Line 109: | Line 109: | ||
*<span title="Check dams, also called ditch checks, dikes, wattles, etc., are temporary or permanent linear structures placed perpendicular to concentrated flows such as in drainage ditches, channels, and swales to reduce flow velocities and prevent channel down-cutting."> [https://stormwater.pca.state.mn.us/index.php?title=Sediment_control_practices_-_Check_dams_(ditch_checks,_ditch_dikes) '''ditch checks''']</span> | *<span title="Check dams, also called ditch checks, dikes, wattles, etc., are temporary or permanent linear structures placed perpendicular to concentrated flows such as in drainage ditches, channels, and swales to reduce flow velocities and prevent channel down-cutting."> [https://stormwater.pca.state.mn.us/index.php?title=Sediment_control_practices_-_Check_dams_(ditch_checks,_ditch_dikes) '''ditch checks''']</span> | ||
*<span title="Contributing area is defined as the total area, including pervious and impervious surfaces, contributing to a BMP. It is assumed that in most cases, with the exception of green roofs and many permeable pavement systems, impervious surfaces will constitute more than 50 percent of the contributing area to the BMP and that most of this impervious is directly connected."> '''drainage Area'''</span> | *<span title="Contributing area is defined as the total area, including pervious and impervious surfaces, contributing to a BMP. It is assumed that in most cases, with the exception of green roofs and many permeable pavement systems, impervious surfaces will constitute more than 50 percent of the contributing area to the BMP and that most of this impervious is directly connected."> '''drainage Area'''</span> | ||
+ | *<span title="The length of time, usually expressed in hours, for ponded water in a stormwater practice to drain. For stormwater practices where water is stored in media, there is no clear definition of drawdown, but an acceptable assumption is the time for water to drain to field capacity"> '''drawdown time'''</span> | ||
*<span title="The surface and subsurface area surrounding a public water supply well, including the wellhead protection area, that must be managed by the entity identified in a wellhead protection plan. This area is delineated using identifiable landmarks that reflect the scientifically calculated wellhead protection area boundaries as closely as possible."> [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_and_wellhead_protection '''Drinking Water Source Management Area (DWSMA),''']</span> | *<span title="The surface and subsurface area surrounding a public water supply well, including the wellhead protection area, that must be managed by the entity identified in a wellhead protection plan. This area is delineated using identifiable landmarks that reflect the scientifically calculated wellhead protection area boundaries as closely as possible."> [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_and_wellhead_protection '''Drinking Water Source Management Area (DWSMA),''']</span> | ||
*<span title="a system of crop irrigation involving the controlled delivery of water directly to individual plants through a network of tubes or pipes."> '''drip irrigation'''</span> | *<span title="a system of crop irrigation involving the controlled delivery of water directly to individual plants through a network of tubes or pipes."> '''drip irrigation'''</span> |
Hover boxes allow the user to hover over bolded text and see a definition for that text. If the bolded text is blue, there is a link to more information.
We have only begun to use them since June, 2019. When we modify older pages, we will incorporate hover boxes into updates.
This page lists standard definitions used in hover boxes throughout this manual. Hover your mouse over any bolded term and a definition will be displayed. This list will continue to expand as new terms are encountered. You'll note that some terms have not yet been defined (not bolded).