Category:Level 3 - Models and modeling/Specific models/MIDS Calculator
This category provides links to pages that address the Minimal Impact Design Standards (MIDS) Calculator.
Subcategories
This category has only the following subcategory.
Pages in category "Level 3 - Models and modeling/Specific models/MIDS Calculator"
The following 42 pages are in this category, out of 42 total.
E
M
R
- Recommendations and guidance for utilizing the MIDS calculator to meet TMDL permit requirements
- Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator
- Requirements, recommendations and information for using bioretention with an underdrain BMPs in the MIDS calculator
- Requirements, recommendations and information for using bioretention with no underdrain BMPs in the MIDS calculator
- Requirements, recommendations and information for using green roofs as a BMP in the MIDS calculator
- Requirements, recommendations and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator
- Requirements, recommendations and information for using infiltration basin/underground infiltration BMPs in the MIDS calculator
- Requirements, recommendations and information for using Other as a BMP in the MIDS calculator
- Requirements, recommendations and information for using permeable pavement BMPs in the MIDS calculator
- Requirements, recommendations and information for using sand filter as a BMP in the MIDS calculator
- Requirements, recommendations and information for using stormwater disconnection (impervious disconnection) BMPs in the MIDS calculator
- Requirements, recommendations and information for using stormwater pond as a BMP in the MIDS calculator
- Requirements, recommendations and information for using stormwater wetland as a BMP in the MIDS calculator.
- Requirements, recommendations and information for using swale side slope as a BMP in the MIDS calculator
- Requirements, recommendations and information for using swale with an underdrain as a BMP in the MIDS calculator
- Requirements, recommendations and information for using swale without an underdrain as a BMP in the MIDS calculator
- Requirements, recommendations and information for using trees as a BMP in the MIDS calculator
- Requirements, recommendations and information for using trees with an underdrain as a BMP in the MIDS calculator
- Requirements, recommendations and information for using underground infiltration BMPs in the MIDS calculator
- Requirements, recommendations and information for using wet swale as a BMP in the MIDS calculator
- Routing stormwater runoff to swales and swale side slopes in the MIDS Calculator
T
Media in category "Level 3 - Models and modeling/Specific models/MIDS Calculator"
The following 45 files are in this category, out of 45 total.
1 - Bioretention Basin Example.docx ; 644 KB
- 11 - Sand Filter example.docx ; 462 KB
- 11 - Wet Swale.docx ; 106 KB
- 12 - Sand Filter.docx ; 113 KB
- 12 - Stormwater Pond.docx ; 679 KB
- 13 - Wetland example.docx ; 483 KB
- 13 - Wetland.docx ; 100 KB
- 14 - Stormwater Pond.docx ; 280 KB
- 15 - Harvest and reuse updated.docx ; 426 KB
- 15 - Harvest and reuse.docx ; 431 KB
- 15 - Other example.docx ; 757 KB
- 16 - Individual vs Clumping example.docx ; 4.12 MB
- 16 - Other.docx ; 149 KB
- 17 - BMPs in Series Example.docx ; 3.79 MB
- 2 - MIDS Calculator Overview.docx ; 907 KB
- 3 - Infiltration basin.docx ; 177 KB
- 4 - Green Roof Example.docx ; 544 KB
- 4 - Green Roof.docx ; 193 KB
- 5 - Infiltration Basin example.docx ; 612 KB
- 5 - Permeable pavement.docx ; 242 KB
- 6 - Tree trench system-box.docx ; 332 KB
- 8 - Swale Side Slope.docx ; 155 KB
- 9 - Swale Main Channel.docx ; 292 KB
Calculator exercises and answers.pdf ; 6.24 MB
- Corrected April 10 example.xls ; 8.44 MB
- Corrected July 14.xls ; 8.43 MB
- Corrected June 27.xls ; 8.44 MB
- Disconnection credit calculator.xlsx ; 266 KB
- ET data.xlsx ; 49 KB
- Underground storage volumes 3.xlsx ; 997 KB