Minnesota Pollution Control Agency Logo

Minnesota Stormwater Manual

Search results

Create the page "MIDS calculator example" on this wiki! See also the search results found.

Page title matches

Page text matches

  • MIDS calculator comparisons
    ...en MIDS calculator|<font size=3>Comparison between MIDS calculator and EPA calculator</font size>]] ...of comparison between MIDS calculator|<font size=3>Comparison between MIDS calculator, P8, and WinSLAMM</font size>]]
    639 bytes (87 words) - 20:17, 1 December 2022
  • User’s Guide
    ...ic applications we recommend [[Links to Manual pages that address the MIDS calculator|using information from this page]]|alert-warning}} Download a Word version of the MIDS Calculator User's Guide [[File:Calculator User Documentation-1.docx]]
    757 bytes (101 words) - 20:11, 23 January 2023
  • Links to Manual pages that address the MIDS calculator
    ...using specific BMPs in the MIDS calculator. Each page includes one or more example. ...and information for using bioretention with no underdrain BMPs in the MIDS calculator|Bioinfiltration (no underdrain)]]
    3 KB (423 words) - 21:51, 17 November 2022
  • Minimal Impact Design Standards
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] ...php?title=Summary_of_changes_in_Version_4_Minimal_Impact_Design_Standards_(MIDS)_Calculator link here]. Note that Version 3 files cannot be used in Version
    8 KB (1,204 words) - 14:21, 2 April 2024
  • Calculating stormwater volume and pollutant reductions and credits
    ==Information on using the [[MIDS calculator|Minimal Impact Design Standards calculator]] to calculate credits for volume, phosphorus and total suspended solids== ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]]
    3 KB (395 words) - 20:35, 17 November 2022
  • Links to other calculators
    *[http://www.epa.gov/nrmrl/wswrd/wq/models/swc/ U.S. EPA National Stormwater Calculator] ...ement/water-management/permits Carver County, Minnesota, Volume Compliance Calculator]
    1 KB (116 words) - 16:04, 31 January 2023
  • MIDS calculator sample exercises
    ...ic applications we recommend [[Links to Manual pages that address the MIDS calculator|using information from this page]]|alert-warning}} ...d information for using that BMP in the calculator. Each page contains an example application for the BMP. Links to those pages are shown below.
    5 KB (664 words) - 20:18, 1 December 2022
  • MIDS technical documents
    ...mimic natural hydrology. Download pdf of this document - [[File:assessment MIDS performance goal alternatives.pdf]]. *[[Overview of Minimal Impact Design Standards (MIDS)]]
    652 bytes (81 words) - 13:46, 23 January 2023
  • MIDS calculator videos
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] [[file:Screen shot of calculator.png|thumb|500px|alt=schematic showing routing of BMPs]]
    2 KB (314 words) - 13:45, 23 January 2023
  • MIDS Calculator stormwater pond design level criteria related to pond volume
    <font size=3>'''MIDS Calculator stormwater pond design level criteria related to pond volume'''</font size> Link to this [[MIDS Calculator stormwater pond design level criteria related to pond volume|table]]
    2 KB (279 words) - 14:35, 6 August 2022
  • Recommendations and guidance for utilizing select models to meet TMDL permit requirements
    *[[Recommendations and guidance for utilizing the MIDS calculator to meet TMDL permit requirements]] =MIDS Calculator=
    1 KB (140 words) - 23:03, 12 December 2022
  • Technical documents
    [[Category:Level 2 - Management/MIDS]] *[[File:MIDS Pretreatment FINAL.pdf]]
    3 KB (485 words) - 11:49, 27 July 2023
  • Descriptions of training and webinar events
    ==MIDS Calculator - Introduction== ...ticipants will learn how to use the Minimal Impact Design Standards (MIDS) Calculator to estimate runoff volume reduction and pollutant loading with and without
    5 KB (696 words) - 14:29, 6 December 2022
  • Training and workshop materials and modules
    *Minnesota Erosion Control Association MIDS calculator workshops, January 29, 2019, Willmar, MN **PowerPoint for introductory class:[[File:MECA MIDS calculator intro workshop.pptx]]
    3 KB (431 words) - 14:25, 6 December 2022
  • General MIDS Calculator result QAQC list
    <font size=3>'''General MIDS Calculator result QAQC list'''</font size><br> Link to this [[General MIDS Calculator result QAQC list|table]]
    2 KB (282 words) - 14:43, 4 August 2022
  • Assessing the performance of dry swale (grass swale)
    ...mation for using dry swale (grass swale) without an underdrain in the MIDS calculator] ...formation for using dry swale (grass swale) with an underdrain in the MIDS calculator]
    2 KB (266 words) - 02:41, 15 December 2022
  • Assessing the performance of high-gradient stormwater step-pool swale
    ...at the slope for your site. The relationship is not linear. Links to MIDS calculator information are provided below. ...mation for using dry swale (grass swale) without an underdrain in the MIDS calculator]
    3 KB (362 words) - 02:40, 15 December 2022
  • MIDS Calculator example documents (MS WORD)
    ...ndards calculator. These files were largely developed for Version 2 of the calculator and therefore may be somewhat dated, but the basic approaches are still app *[[File:1 - Bioretention Basin Example.docx]]
    2 KB (286 words) - 01:59, 3 April 2023
  • Assessing the performance of wet swale (wetland channel)
    ...uirements, recommendations and information for using wet swale in the MIDS calculator] ...mendations and information for using swale side slope as a BMP in the MIDS calculator]]
    1 KB (180 words) - 22:21, 23 November 2022
  • Routing stormwater runoff to swales and swale side slopes in the MIDS Calculator
    ...ystem. This page provides guidance for routing water to swales in the MIDS Calculator. ===Swale configuration in the MIDS Calculator===
    5 KB (828 words) - 19:06, 23 November 2022
  • External resources for bioretention
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    2 KB (230 words) - 21:52, 31 January 2023
  • Calculator
    ...php?title=Summary_of_changes_in_Version_4_Minimal_Impact_Design_Standards_(MIDS)_Calculator link here]. Note that Version 3 files cannot be used in Version {{alert|If you are using Version 3 of the Calculator, three formula errors were found in the Excel spreadsheet that accompanies
    5 KB (824 words) - 14:16, 2 April 2024
  • MIDS Calculator BMP summary
    <font size=3>'''MIDS Calculator BMP summary'''</font size><br> Link to this [[MIDS Calculator BMP summary|table]]
    3 KB (587 words) - 14:43, 4 August 2022
  • Updates to credits and pollutant removal values
    =Changes to the MIDS Calculator= The MIDS Calculator was updated in 2021 and includes several changes that relate to credits. Th
    3 KB (375 words) - 14:05, 1 August 2022
  • MIDS Calculator land cover summary
    <font size=3>'''MIDS Calculator land cover summary'''</font size><br> Link to this [[MIDS Calculator land cover summary|table]]
    2 KB (265 words) - 14:44, 4 August 2022
  • TMDL model description and overview
    <td>MIDS calculator</td> ...nformance to MIDS performance goals for development-scale models. The MIDS Calculator is an empirical model which predicts pollutant removal based on correlation
    3 KB (427 words) - 14:54, 4 August 2022
  • Minimal Impact Design Standards (MIDS) Implementation Case Study: City of White Bear Lake
    ...can be utilized to meet MIDS performance goals and can be used in the MIDS Calculator. On the left is a green roof and on the right is an infiltration swale.</fo ...ing the MIDS Calculator user interface|<font size=3>Image showing the MIDS Calculator user interface.</font size>]]
    6 KB (880 words) - 16:36, 8 December 2022
  • Things to look for when reviewing MIDS calculator files and submissions
    {{alert|This page will be periodically updated as we get questions about the Calculator. See the latest revision date at the bottom of this page.|alert-info}} ...ook for. The page will continue to evolve since we get questions about the calculator and will incorporate those communications into this page. The page includes
    3 KB (412 words) - 20:37, 1 December 2022
  • Dry swale (Grass swale)
    ...mation for using dry swale (grass swale) without an underdrain in the MIDS calculator] ...formation for using dry swale (grass swale) with an underdrain in the MIDS calculator]
    3 KB (435 words) - 16:08, 9 February 2023
  • Estimating and calculating bypass for the Minimal Impact Design Standards (MIDS) Calculator
    ...<font size=3>Curves for determining how much bypass to enter into the MIDS Calculator. Curves are shown for 4 performance curves (0.75, 1.0, 1.1, and 1.5 inches) ...ent must be achieved"> '''performance goal'''</span>, such as the 1.1 inch MIDS standard or the 1 inch requirement in the [https://stormwater.pca.state.mn.
    6 KB (904 words) - 15:50, 12 January 2023
  • Cost-benefit considerations for bioretention
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    2 KB (262 words) - 20:54, 12 December 2022
  • Using the MIDS Calculator to generate load reduction and WLA reporting terms
    <font size=3>'''Using the MIDS Calculator to generate load reduction and WLA reporting terms'''</font size><br> Link to this [[Using the MIDS Calculator to generate load reduction and WLA reporting terms|table]]
    2 KB (302 words) - 14:43, 4 August 2022
  • Guidance for incorporating street sweeping into the Minimal Impact Design Standards Calculator and MPCA’s Simple Estimator
    ...t sweeping could be incorporated in to the Minimal Impact Design Standards Calculator and the MPCA Simple Estimator. Recommendations are provided below. *Do not incorporate street sweeping into MIDS.
    1 KB (152 words) - 22:42, 8 December 2022
  • High-gradient stormwater step-pool swale
    ...at the slope for your site. The relationship is not linear. Links to MIDS calculator information are provided below. ...mation for using dry swale (grass swale) without an underdrain in the MIDS calculator]
    4 KB (601 words) - 15:31, 6 December 2022
  • Using the Minnesota Stormwater Manual and MIDS Calculator to help meet industrial stormwater permit requirements
    ...he Minnesota Stormwater Manual and Minimal Impacts Design Standards (MIDS) calculator can be used to help select, design, construct, and maintain appropriate pra ...gn]: This page contains links to the design sections for several BMPs. For example, clicking on the link for Design criteria for permeable pavement takes you
    9 KB (1,366 words) - 15:57, 5 December 2022
  • Classification of models by model type
    <th>BMP calculator</th> <td>[http://stormwater.pca.state.mn.us/index.php/MIDS_calculator MIDS calculator]</td>
    10 KB (1,796 words) - 13:41, 4 August 2022
  • Detailed information on specific models
    *[[Recommendations and guidance for utilizing the MIDS calculator to meet TMDL permit requirements]]
    446 bytes (58 words) - 17:00, 4 December 2022
  • Filtration
    {{alert|If you are using a swale for stormwater infiltration in the MIDS calculator, and the project requires a [[2018 Minnesota Construction Stormwater Permit ...and information for using swale without an underdrain as a BMP in the MIDS calculator]]</div>
    6 KB (803 words) - 23:44, 6 December 2022
  • Dry swale system with underdrain parameters
    <font size=3>'''Parameters used in the MIDS calculator for a dry swale system with underdrain'''</font size><br>
    865 bytes (133 words) - 02:42, 15 December 2022
  • Overview of models used to meet MS4 TMDL permit requirements
    *Minimal Impact Design Standards Calculator (MIDS Calculator; [https://stormwater.pca.state.mn.us/index.php?title=MIDS_calculator MPCA, ...ce for utilizing the MIDS calculator to meet TMDL permit requirements|MIDS calculator]]; [[Recommendations and guidance for utilizing the MPCA Simple Estimator t
    6 KB (814 words) - 13:12, 12 February 2023
  • Supporting material for bioretention
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    3 KB (340 words) - 22:57, 23 November 2022
  • Guidance on calculating volumes for underground infiltration BMPs in the MIDS calculator
    ...d for determining inputs for the Underground infiltration BMP for the MIDS calculator.</font size>]] ...dia surrounding the pipe. If engineered media is used in the practice, the calculator also requires a calculation of the surface area of the engineered media. Th
    14 KB (2,490 words) - 19:11, 23 November 2022
  • Infiltration basin
    ...ion for using infiltration basin/underground infiltration BMPs in the MIDS calculator]] ...ns and information for using infiltration trench/tree box BMPs in the MIDS calculator]]-->
    3 KB (333 words) - 16:26, 12 January 2023
  • Wet swale (wetland channel)
    ...uirements, recommendations and information for using wet swale in the MIDS calculator] ...mendations and information for using swale side slope as a BMP in the MIDS calculator]]
    3 KB (451 words) - 22:16, 23 November 2022
  • Adjusting dissolved and particulate phosphorus ratios in the MIDS Calculator
    ...the particulate phosphorus to total phosphorus (PP:TP) ratios in the MIDS Calculator. It also shows how to adjust the event mean concentration for individual bm ...or dissolved phosphorus and particulate phosphorus must add up to 1.0. For example, if the dissolved fraction is 0.45, the particulate fraction must be 0.55|a
    10 KB (1,699 words) - 15:59, 15 March 2023
  • Requirements, recommendations and information for using stormwater wetland as a BMP in the MIDS calculator.
    ...umb|alt=symbol for stormwater wetland|<font size=3>Symbol used in the MIDS calculator to represent a stormwater wetland BMP.</font size>]] {{alert|Updates have been made to Version 4 of the MIDS Calculator|alert-info}}
    11 KB (1,614 words) - 01:14, 8 February 2023
  • MIDS calculator tips and information for maximizing volume retention
    ...nformation and recommendations for maximizing volume retention in the MIDS calculator. ...g|thumb|200px|alt=MIDS calculator symbol for green roofs|<font size=3>MIDS calculator symbol for green roofs</font size>]]
    21 KB (3,203 words) - 20:16, 1 December 2022
  • Fact sheets for permeable pavement
    ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    2 KB (202 words) - 16:42, 12 January 2023
  • Construction specifications for stormwater ponds
    ...mmendations and information for using stormwater pond as a BMP in the MIDS calculator]]
    1 KB (154 words) - 14:42, 11 December 2022
  • Requirements, recommendations and information for using green roofs as a BMP in the MIDS calculator
    ...g|thumb|300px|alt=MIDS calculator symbol for green roofs|<font size=3>MIDS calculator symbol for green roofs</font size>]] {{alert|Green roofs have been updated in the MIDS Calculator, Version 4|alert-info}}
    15 KB (2,424 words) - 14:49, 11 December 2022
  • Infiltration
    ...ion for using infiltration basin/underground infiltration BMPs in the MIDS calculator]] ...ations and information for using underground infiltration BMPs in the MIDS calculator]]
    4 KB (469 words) - 17:08, 1 February 2023
  • Total Maximum Daily Loads (TMDLs)
    *'''MIDS (Minimal Impact Design Standards calculator)''' **[[Recommendations and guidance for utilizing the MIDS calculator to meet TMDL permit requirements]]
    6 KB (845 words) - 17:24, 12 January 2023
  • Construction specifications for stormwater wetlands
    ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    1 KB (131 words) - 14:42, 11 December 2022
  • Requirements, recommendations and information for using wet swale as a BMP in the MIDS calculator
    ...in the MIDS calculator.|<font size=3>Symbol used for Wet swale in the MIDS calculator.</font size>]] {{alert|Updates have been made to Version 4 of the MIDS Calculator|alert-info}}
    13 KB (2,199 words) - 22:24, 23 November 2022
  • MIDS Calculator terminology
    ...calculator|Links to pages providing guidance]] for using BMPs in the MIDS calculator are found at the end of this list of terms. *'''Channel length (LC)''': This is an input for using swale in the MIDS calculator. This is the length of the swale channel from the furthest upstream point t
    18 KB (3,025 words) - 20:17, 1 December 2022
  • Requirements, recommendations and information for using sand filter as a BMP in the MIDS calculator
    ...ilter in MIDS calculator|<font size=3>Symbol for a sand filter in the MIDS calculator</font size>]] ...font size=3>Screen shot of the watershed tab for a sand filter in the MIDS calculator</font size>]]
    15 KB (2,395 words) - 01:30, 23 December 2022
  • Percent P Removed Via Non-Volume Reduction Treatment
    <th>Current in MIDS calculator</th> <th>Current in MIDS calculator</th>
    4 KB (607 words) - 18:39, 13 December 2022
  • Calculating credits for stormwater wetlands
    ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    1 KB (168 words) - 14:23, 26 July 2022
  • Requirements, recommendations and information for using Other as a BMP in the MIDS calculator
    ...tion amounts to be entered. This can be used for BMPs that are not in the calculator. Examples of some BMPs that may be used for this BMP are given at the end ==MIDS calculator user inputs for Other BMP==
    16 KB (2,582 words) - 18:55, 23 November 2022
  • Requirements, recommendations and information for using stormwater disconnection (impervious disconnection) BMPs in the MIDS calculator
    ...n MIDS calculator|<font size=3>Symbol for Stormwater Disconnection in MIDS calculator</font size>]] ==MIDS calculator user inputs for stormwater disconnection==
    14 KB (2,160 words) - 13:34, 29 January 2023
  • Bioretention
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] ...0px|alt=photo of a rain garden planted with native vegetation|<font size=3>Example of a rain garden planted with native vegetation.</font size>]]
    5 KB (610 words) - 21:04, 22 December 2022
  • Training and webinar schedule
    ...iptions_of_training_and_webinar_events#MIDS_Calculator_-_Introduction MIDS Calculator - Introduction]. Thursday April 1, 2021. Mike Trojan presenter ...iptions_of_training_and_webinar_events#MIDS_Calculator_-_Introduction MIDS Calculator - Introduction]. Wednesday April 7, 2021. Todd Smith presenter
    10 KB (1,396 words) - 22:01, 4 August 2023
  • Stormwater model and calculator comparisons
    Link to this [[Stormwater model and calculator comparisons|table]]<br> Access this table as a Microsoft Word document: [[File:Stormwater Model and Calculator Comparisons table.docx]].
    10 KB (1,685 words) - 13:37, 4 August 2022
  • Design Sequence Flowchart-Flexible treatment options
    ...t Options Approach shall be followed in the sequence below and through the MIDS Design Sequence Flow Chart. ...determining the correct performance goal or flexible treatment option. For example, in many places in Minnesota bedrock is close to the land surface, soil inf
    3 KB (484 words) - 23:36, 6 December 2022
  • Requirements, recommendations and information for using bioretention BMPs in the MIDS calculator
    ...(MIDS) calculator for bioretention BMPs. Links to MIDS pages and the MIDS calculator are included at the bottom of this page. ...size=3>Schematic showing the inputs needed for bioinfiltration in the MIDS calculator. The equation used to calculate volume captured by the BMP is included.</fo
    23 KB (3,556 words) - 13:18, 29 January 2023
  • MIDS calculator
    ...p.sharebase.com/#/folder/40078/share/185-GxSFQyo5nq7J9D5uEHu-0KMLU--o MIDS Calculator]</font size>]] ...php?title=Summary_of_changes_in_Version_4_Minimal_Impact_Design_Standards_(MIDS)_Calculator link here]. Note that Version 3 files cannot be used in Version
    18 KB (2,742 words) - 14:18, 2 April 2024
  • Plant lists for trees
    ...ents, recommendations and information for using trees as a BMP in the MIDS calculator]] ...ns and information for using trees with an underdrain as a BMP in the MIDS calculator]]
    4 KB (516 words) - 17:18, 8 December 2022
  • Requirements, recommendations and information for using swale side slope as a BMP in the MIDS calculator
    ...swale side slope|<font size=3>Symbol for Swale side slope used in the MIDS calculator</font size>]] ...from impervious surfaces, then two swale side slopes should be used in the calculator and each routed to the corresponding swale main channel BMP. Credit toward
    16 KB (2,575 words) - 13:31, 29 January 2023
  • Water quality BMP comparison matrix for TMDL models
    <td>MIDS calculator</td>
    3 KB (461 words) - 23:00, 12 December 2022
  • Supporting material for trees
    ...ents, recommendations and information for using trees as a BMP in the MIDS calculator]] ...ns and information for using trees with an underdrain as a BMP in the MIDS calculator]]
    4 KB (661 words) - 23:11, 23 November 2022
  • Requirements, recommendations and information for using stormwater pond as a BMP in the MIDS calculator
    ...00px|alt=symbol for constructed pond for MIDS calculator|<font size=3>MIDS calculator symbol for constructed pond.</font size>]] ...t size=3>Screen shot of the inputs needed for constructed pond in the MIDS calculator. The User must select a design level and answer yes or no to whether an ame
    17 KB (2,658 words) - 19:09, 23 November 2022
  • Tips for using the MIDS Calculator for tracking pollutant loading
    ...retention. Specific information about the modeling used in developing the Calculator is found here. ...''total maximum daily loads''']</span> (TMDLs). For this purpose, the MIDS Calculator has limitations, including but not limited to the following.
    14 KB (2,133 words) - 20:38, 1 December 2022
  • Community Assistance Package
    {{alert|We are looking for examples of communities that have adopted the MIDS Community Assistance Package. If your community has adopted ordinances, pl ...age (CAP) and provide a real testing ground for the application of the new MIDS performance goals, credits and calculators. The pilot community project in
    10 KB (1,460 words) - 10:18, 26 January 2023
  • Annual volume treated as a function of soil and water quality volume
    <font size=1><sup>1</sup>Values were determined using the [[MIDS calculator]]. BMPs were sized to exactly meet the water quality volume for a 2 acre si
    2 KB (278 words) - 02:20, 15 December 2022
  • Permeable pavement photo gallery
    File:picture of porous concrete 1.jpg|alt=photo illustrating an example of pervious concrete|Porous concrete ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    2 KB (261 words) - 17:12, 8 December 2022
  • Updates to the MIDS calculator
    ...php?title=Summary_of_changes_in_Version_4_Minimal_Impact_Design_Standards_(MIDS)_Calculator link here]. Note that Version 3 files cannot be used in Version ...nges from Version 2 to [https://stormwater.pca.state.mn.us/index.php?title=Calculator Version 3]. Version 3.0 includes the following changes from Version 2.
    10 KB (1,672 words) - 14:08, 5 October 2023
  • Stormwater runoff coefficients/curve numbers for different land uses
    *[https://stormwater.pca.state.mn.us/images/4/4b/P-gen3-12f.pdf MPCA MIDS memo: Regional Hydrologic Metrics – Curve Numbers] *[https://www.lmnoeng.com/Hydrology/rational.php Rational Equation Calculator]
    2 KB (277 words) - 18:54, 2 February 2023
  • TMDL model comparison matrix
    <td>MIDS calculator</td>
    2 KB (403 words) - 14:55, 4 August 2022
  • Overview of Minimal Impact Design Standards (MIDS)
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] ...ly implement the concepts and practices that LID promotes and encourages. MIDS contains four main elements to meet these needs:
    12 KB (1,710 words) - 14:44, 6 February 2023
  • Requirements, recommendations and information for using bioretention with no underdrain BMPs in the MIDS calculator
    ...for Bioretention basin (without underdrain) (bioinfiltration) in the MIDS calculator.</font size>]] ==MIDS calculator user inputs for bioinfiltration==
    23 KB (3,549 words) - 18:50, 23 November 2022
  • Technical support for stormwater and rainwater harvest and use/reuse
    ...and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator]
    2 KB (264 words) - 18:57, 18 July 2022
  • Recommendations and guidance for utilizing the MIDS calculator to meet TMDL permit requirements
    ...mmer, 2020. Changes in the guidance on this page may be necessary once the calculator is updated.|alert-info}} ...ments#MIDS_calculator_quick_guide Access a quick guide] for using the MIDS Calculator to meet MS4 TMDL requirements</font size>]]
    23 KB (3,606 words) - 19:42, 14 February 2023
  • Quick guides for using models to meet MS4 TMDL permit requirements
    ==MIDS calculator quick guide== ...screenshot| |This screenshot illustrates examples of BMPs available in the calculator and how they can be routed in a treatment train.}}</font size>]]
    18 KB (2,675 words) - 23:33, 5 December 2022
  • Requirements, recommendations and information for using infiltration basin/underground infiltration BMPs in the MIDS calculator
    ...ations and information for using underground infiltration BMPs in the MIDS calculator]]). The information on the page below remains accurate for aboveground infi ...|300px|alt=MIDS calculator symbol for infiltration basin|<font size=3>MIDS calculator symbol for infiltration basin.</font size>]]
    22 KB (3,347 words) - 13:33, 29 January 2023
  • Requirements, recommendations and information for using permeable pavement BMPs in the MIDS calculator
    ...|300px|alt=MIDS calculator symbol for permeable pavement|<font size=3>MIDS calculator symbol for permeable pavement.</font size>]] ...|alt=Screen shot of watershed tab for permeable pavement|<font size=3>MIDS calculator screen shot of watershed tab for permeable pavement.</font size>]]
    20 KB (3,173 words) - 18:54, 23 November 2022
  • Trees
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] ...ents, recommendations and information for using trees as a BMP in the MIDS calculator]]
    6 KB (846 words) - 11:42, 26 January 2023
  • Assessing the performance of bioretention
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    7 KB (937 words) - 15:22, 27 December 2022
  • General MPCA Simple Estimator result QAQC list
    <th>Related MIDS Calculator Output</th>
    2 KB (275 words) - 14:28, 4 August 2022
  • Images, CAD drawings
    ...nd_archives/Images/Schematic_-_MIDs Minimal Impact Design Standards (MIDS) calculator schematics] File:Bioinfiltration.png|alt=image of bioinfiltration device|Example of a CADD image for bioinfiltration
    4 KB (560 words) - 14:51, 22 January 2023
  • Performance curves for MIDS calculator
    ...[Performance goals for new development, re-development and linear projects|MIDS performance goal]] requirement is instantaneous, requiring the BMP to infil ==Example Performance Curve==
    13 KB (2,043 words) - 22:40, 28 January 2023
  • Green roofs
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] ...recommendations and information for using green roofs as a BMP in the MIDS calculator]]
    3 KB (456 words) - 22:41, 3 December 2022
  • Cost-benefit considerations for infiltration
    ...ion for using infiltration basin/underground infiltration BMPs in the MIDS calculator]]
    2 KB (287 words) - 20:53, 12 December 2022
  • Stormwater and rainwater harvest and use/reuse
    [[File:mids logo.jpg|300px|left|alt=image of Minimal Impact Design Standards logo]] ...and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator]
    4 KB (569 words) - 21:29, 9 December 2022
  • Construction specifications for sand (media) filters
    ...recommendations and information for using sand filter as a BMP in the MIDS calculator]]
    3 KB (386 words) - 13:46, 29 December 2022
  • Bioretention - bioinfiltration
    ...s, recommendations and information for using bioretention BMPs in the MIDS calculator]]
    2 KB (271 words) - 20:00, 1 December 2022
  • References for stormwater wetlands
    ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    3 KB (333 words) - 02:46, 25 February 2023
  • Links for green roofs
    ...recommendations and information for using green roofs as a BMP in the MIDS calculator]]</noinclude>
    3 KB (398 words) - 21:40, 7 February 2023
  • Stormwater wetlands
    ...px|alt=This photo shows a an example of a stormwater wetland|<font size=3>Example of a stormwater wetland in a largely undeveloped area.</font size>]] ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    2 KB (316 words) - 01:09, 8 February 2023
  • Example for using BMPs in series in the MIDS calculator
    ...veral BMPs in series. Examples for individual BMPs can be found at [[MIDS calculator sample exercises]]. ...Ps used for this example|<font size=3>Table summarizing BMPs used for this example.</font size>]]
    18 KB (2,967 words) - 20:12, 1 December 2022
  • Summary of changes in Version 4 Minimal Impact Design Standards (MIDS) Calculator
    <th><center><font size=3>'''Summary of changes to MIDS Calculator (Version 4)'''</font size></center></th> ...php?title=Summary_of_changes_in_Version_4_Minimal_Impact_Design_Standards_(MIDS)_Calculator#Constructed_ponds_with_an_iron_bench Constructed ponds with an
    28 KB (4,322 words) - 14:19, 2 April 2024
  • Minimal Impact Design Standards (MIDS) workgroup
    ...et for approximately 3 years and was then disbanded upon completion of the MIDS material. This page contains information from the workgroup and workgroup m ...kgroup members.jpg|300px|thumb|alt=photo of workgroup members|<font size=3>MIDS work group members</font size>]]
    19 KB (2,853 words) - 14:14, 28 December 2022
  • Supporting material for green roofs
    ...recommendations and information for using green roofs as a BMP in the MIDS calculator]]</noinclude>
    3 KB (397 words) - 23:13, 23 November 2022
  • Case study for using the MIDS calculator to meet TMDL permit requirements
    ....us/index.php?title=MIDS_calculator Minimal Impact Design Standards (MIDS) Calculator] to evaluate <span title="the portion of a receiving water's assimilative c ...related to TMDL requirements and how the City of Medina could use the MIDS Calculator to evaluate and demonstrate progress towards TMDL compliance. The following
    26 KB (3,924 words) - 16:08, 12 January 2023
  • Requirements, recommendations and information for using underground infiltration BMPs in the MIDS calculator
    ...n MIDS calculator|<font size=3>Symbol for underground infiltration in MIDS calculator</font size>]] ==MIDS calculator user inputs for underground infiltration==
    24 KB (3,705 words) - 19:11, 23 November 2022
  • Types of green roofs
    ...recommendations and information for using green roofs as a BMP in the MIDS calculator]]</noinclude>
    3 KB (401 words) - 22:44, 23 November 2022
  • Infiltration trench
    ...ion for using infiltration basin/underground infiltration BMPs in the MIDS calculator]]
    2 KB (324 words) - 16:25, 12 January 2023
  • Requirements, recommendations and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator
    ...e.g. toilet flushing). The type of storage device is not considered in the calculator (e.g. pond or cistern). Any pollutant associated with the water used for ir ==MIDS calculator user inputs for harvest and re-use/cistern==
    28 KB (4,546 words) - 22:47, 28 January 2023
  • Requirements, recommendations and information for using trees as a BMP in the MIDS calculator
    ...ymbol used for the tree trench system/box (w/o underdrain) BMP in the MIDS calculator. Note the symbol shows multiple trees since tree trench systems contain mul ...on|bioretention]] BMP, we recommend using the bioretention BMP in the MIDS calculator instead of this BMP.
    33 KB (5,371 words) - 19:08, 23 November 2022
  • Stormwater Manual webinars
    *Overview of recently developed street sweeping calculator: Aileen Molloy, Tetra Tech The MPCA hosted a live webinar on updates to the MIDS Calculator (Version 3). This webinar focused on bioretention media, bioretention veget
    18 KB (2,529 words) - 20:27, 9 August 2023
  • References for bioretention
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    6 KB (686 words) - 02:45, 25 February 2023
  • Permeable pavement
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] ...0px|alt=photo illustrating an example of pervious concrete|<font size=3>An example of pervious concrete.</font size>]]
    4 KB (552 words) - 21:06, 22 December 2022
  • Stormwater filtration BMPs - treatment properties
    <td>[[File:MIDS calculator green roofs symbol.jpg|100px|alt=green roof schematic]]</td>
    3 KB (496 words) - 15:07, 2 August 2022
  • Exercises from MIDS calculator workshops
    This page summarizes exercises used for MIDS calculator training workshops. ...examples of approaches that could be used for each problem. These are just example solutions and you are encouraged to try different solutions.
    22 KB (3,549 words) - 18:28, 11 January 2023
  • Requirements, recommendations and information for using swale without an underdrain as a BMP in the MIDS calculator
    ...e=3>Symbol for Swale main channel (without an underdrain) used in the MIDS calculator.</font size>]] ...should be used in combination with the swale main channel BMP in the MIDS calculator. All pollutants in the infiltrated water are credited as being reduced. A
    33 KB (5,347 words) - 13:38, 29 January 2023
  • Calculating credits for green roofs
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...eable surface and typically have limited space to install surface BMPs. An example would be a downtown area."> '''highly urban and ultra-urban environments'''
    19 KB (2,893 words) - 14:22, 26 July 2022
  • Stormwater filtration BMPs – selection considerations
    <td>[[File:MIDS calculator green roofs symbol.jpg|100px|alt=green roof schematic]]</td>
    3 KB (447 words) - 15:08, 2 August 2022
  • Construction specifications for green roofs
    ...oof only after there will be no more traffic by other trades, such as, for example, window installers or mechanical equipment installers. ...recommendations and information for using green roofs as a BMP in the MIDS calculator]]</noinclude>
    3 KB (405 words) - 21:38, 7 February 2023
  • Sand filter
    ...recommendations and information for using sand filter as a BMP in the MIDS calculator]]
    3 KB (455 words) - 13:45, 29 December 2022
  • Performance goals for new development, re-development and linear projects
    ==MIDS Performance Goals== ...e goal specifies what level of stormwater treatment must be achieved. The MIDS performance goals were developed to satisfy the legislation by determing ho
    10 KB (1,509 words) - 18:29, 6 February 2024
  • Requirements, recommendations and information for using swale with an underdrain as a BMP in the MIDS calculator
    ...nt size=3>Symbol for Swale main channel (with underdrain) used in the MIDS calculator.</font size>]] ...should be used in combination with the swale main channel BMP in the MIDS calculator. All pollutants in the infiltrated water are credited as being reduced. A
    31 KB (4,982 words) - 13:36, 29 January 2023
  • Cost-benefit considerations for stormwater ponds
    ...mmendations and information for using stormwater pond as a BMP in the MIDS calculator]]
    3 KB (397 words) - 20:51, 12 December 2022
  • Turf
    [[File:mids logo.jpg|300px|right|alt=image of Minimal Impact Design Standards logo]] ...t included in the [[MIDS calculator|Minimal Impact Design Standards (MIDS) calculator]] because design, construction and maintenance criteria and specifications
    31 KB (4,529 words) - 21:31, 16 February 2023
  • Types of stormwater wetlands
    ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    4 KB (509 words) - 01:09, 8 February 2023
  • Scenario for developing a stormwater treatment train for an ultra-urban setting
    ...enario Base |<font size=3>Site layout for an ultra-urban setting. For this example the site consists of a single building on a 1 acre drainage area. (source: ...px|alt=schematic illustrating Ultra-Urban Scenario BMP Layout|<font size=3>Example of a suitable BMP layout for an ultra-urban setting (Source: CDM Smith).</f
    31 KB (4,488 words) - 13:33, 12 February 2023
  • References for stormwater ponds
    ...mmendations and information for using stormwater pond as a BMP in the MIDS calculator]]
    4 KB (470 words) - 02:46, 25 February 2023
  • Cost-benefit considerations for stormwater wetlands
    ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    3 KB (412 words) - 01:05, 8 February 2023
  • Scenario for developing a stormwater treatment train for a parking lot
    ...eting regulatory requirements, and meeting client expectations. The [[MIDS calculator]] was used to evaluate the performance goals for the site given the drainag ...rate'''</span> of the underlying soils. For information on using the MIDS calculator for permeable pavement, [http://stormwater.pca.state.mn.us/index.php/Requir
    36 KB (5,210 words) - 22:51, 12 December 2022
  • Requirements, recommendations and information for using trees with an underdrain as a BMP in the MIDS calculator
    ...trench system-treebox with underdrain|<font size=3>Symbol used in the MIDS calculator to represent the tree trench system-tree box BMP with an underdrain. Note t ...on|bioretention]] BMP, we recommend using the bioretention BMP in the MIDS calculator instead of this BMP.
    44 KB (7,312 words) - 13:41, 29 January 2023
  • Summary of model information
    <td>[http://stormwater.pca.state.mn.us/index.php/MIDS_calculator MIDS calculator]</td> ....gov/water-research/national-stormwater-calculator EPA National Stormwater Calculator]</td>
    18 KB (3,187 words) - 16:41, 27 December 2022
  • Assessing the performance of green roofs
    ...recommend developing maintenance specifications, but recommend developing example maintenance performance requirements, as described below. Set the following requirements for, for example, 30 days after Substantial Completion, for roofs established using cuttings
    4 KB (505 words) - 21:39, 7 February 2023
  • Filtration Summary Table
    <td>[[File:MIDS calculator green roofs symbol.jpg|100px|alt=green roof schematic]]</td>
    4 KB (692 words) - 18:22, 13 December 2022
  • BMPs for stormwater filtration
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    33 KB (4,581 words) - 15:04, 11 January 2023
  • Summary of permit requirements for bioretention
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    12 KB (1,682 words) - 19:10, 8 December 2022
  • Requirements, recommendations and information for using bioretention with an underdrain BMPs in the MIDS calculator
    ...|<font size=3>Symbol for Bioretention basin (with underdrain) used in MIDS calculator.</font size>]] {{alert|Updates have been made to Version 4 of the MIDS Calculator|alert-info}}
    55 KB (8,696 words) - 13:27, 29 January 2023
  • Recommendations and guidance for utilizing stormwater best management practice monitoring to meet TMDL permit requirements
    [[File:BMP monitoring.jpg|300px|thumb|alt=image BMP monitoring|<font size=3>Example of BMP monitoirng. Source: [https://www.cwp.org/performance-enhancing-devic *[[Recommendations and guidance for utilizing the MIDS calculator to meet TMDL permit requirements]]
    16 KB (2,237 words) - 19:26, 14 February 2023
  • Operation and maintenance of permeable pavement
    ...maintained and continues functioning. The local authority should use this MIDS guideline to establish measurable performance criteria for enforcing mainte ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    7 KB (887 words) - 21:58, 24 January 2023
  • Scenario for developing a stormwater treatment train for constructed ponds in new development
    ...Scenario Base|<font size=3>Schematic illustrating the site layout for this example. The site consists of 40 acres of rural land use that is undergoing new de ...oving nitrogen, metals, bacteria, and other pollutants. Note that the MIDS calculator does not allow for adjustments in phosphorus loading from sand filters base
    44 KB (6,330 words) - 13:35, 12 February 2023
  • Stormwater filtration BMPs - overview
    <td>[[File:MIDS calculator green roofs symbol.jpg|100px|alt=green roof schematic]]</td>
    4 KB (639 words) - 15:07, 2 August 2022
  • Overview for high-gradient stormwater step-pool swale
    ...eable surface and typically have limited space to install surface BMPs. An example would be a downtown area."> '''highly urban and ultra-urban environments''' ...at the slope for your site. The relationship is not linear. Links to MIDS calculator information are provided below.
    25 KB (3,698 words) - 02:39, 15 December 2022
  • Assessing the performance of stormwater ponds
    ...mmendations and information for using stormwater pond as a BMP in the MIDS calculator]]
    7 KB (891 words) - 15:28, 27 December 2022
  • Types of stormwater ponds
    ...mmendations and information for using stormwater pond as a BMP in the MIDS calculator]]
    5 KB (710 words) - 21:02, 15 August 2022
  • Assessing the performance of sand (media) filters
    ...recommendations and information for using sand filter as a BMP in the MIDS calculator]]
    7 KB (990 words) - 13:47, 29 December 2022
  • What's New
    ***[[Street Sweeping Phosphorus Credit Calculator]] ***[[Street Sweeping Phosphorus Credit Calculator]]
    60 KB (8,737 words) - 18:14, 19 July 2023
  • Calculating credits for infiltration basin
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...ction stormwater, V<sub>WQ</sub> is 1 inch off new impervious surface. For MIDS, V<sub>WQ</sub> is 1.1 inches.
    37 KB (5,249 words) - 16:07, 18 July 2022
  • Scenario for developing a stormwater treatment train for a retrofit site
    ...eting regulatory requirements, and meeting client expectations. The [[MIDS calculator]] was used to evaluate the performance goals for the site given the drainag ...ect performance goals within the available space on site. Using the MIDS calculator, maximizing the location and sizing of the BMPs achieved a 90 percent reduc
    31 KB (4,411 words) - 13:21, 12 February 2023
  • Calculating credits for sand filter
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...ndex.php/Minimal_Impact_Design_Standards Minimal Impact Design Standards] (MIDS), the V<sub>WQ</sub> is 1.1 inches times the area of impervious surface.
    51 KB (7,365 words) - 20:08, 22 November 2022
  • Recommendations and guidance for utilizing major stormwater outfall monitoring to meet TMDL permit requirements
    ...tfall monitoring.png|300px|thumb|alt=image outfall monitoring|<font size=3>example of outfall monitoring. Photo courtesy of MPCA's Flickr site.</font size>]] ...developing an outfall monitoring SOP. The following subsection provides an example of how outfall monitoring can be used to evaluate compliance with an areal
    21 KB (2,980 words) - 16:07, 20 February 2023
  • Types of permeable pavement
    ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    6 KB (854 words) - 20:52, 15 August 2022
  • Calculating credits for sand (media) filters
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...ndex.php/Minimal_Impact_Design_Standards Minimal Impact Design Standards] (MIDS), the V<sub>WQ</sub> is 1.1 inches times the area of impervious surface.
    51 KB (7,398 words) - 14:29, 2 February 2023
  • Case studies for permeable pavement
    ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    6 KB (785 words) - 20:18, 28 December 2022
  • Overview for permeable pavement
    ...raph.jpg|thumb|300px|alt=a photo illustrating porous concrete|<font size=3>Example of a new retrofit permeable parking lot at the University of Minnesota</fon ...eable surface and typically have limited space to install surface BMPs. An example would be a downtown area."> '''highly urban and ultra-urban environments'''
    15 KB (2,185 words) - 19:28, 27 December 2022
  • Calculating credits for infiltration
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...ction stormwater, V<sub>WQ</sub> is 1 inch off new impervious surface. For MIDS, V<sub>WQ</sub> is 1.1 inches.
    42 KB (5,899 words) - 14:22, 26 July 2022
  • Calculating credits for stormwater and rainwater harvest and use/reuse
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or [[File:Overview image.png|right|thumb|300 px|alt=This schematic shows Example Stormwater Harvesting and Use System Schematic|<font size=3>Schematic illus
    45 KB (6,471 words) - 21:16, 28 July 2022
  • Guidance for meeting bacteria TMDL MS4 permit requirements
    ...d relative contributions of sources in the TMDL impaired subwatershed. For example, the [https://www.pca.state.mn.us/sites/default/files/wq-iw9-16e.pdf Vermil ...posal."> '''sanitary sewers'''</span>, and dog parks. In this hypothetical example the <span title="A municipal separate storm sewer system (MS4) is a means o
    21 KB (3,100 words) - 15:22, 3 December 2022
  • BMPs for stormwater infiltration
    ...nt practice or device needed to meet a water quality or quantity goal. For example, stormwater BMPs may be sized to treat a volume of runoff, a flow rate, or ...ion for using infiltration basin/underground infiltration BMPs in the MIDS calculator]]
    43 KB (6,049 words) - 17:06, 1 February 2023
  • Calculating credits for permeable pavement
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...water quality volume is 1 inch times the new impervious surface area. For MIDS, the V<sub>WQ</sub> is 1.1 inches times the impervious surface area. In rea
    58 KB (8,708 words) - 02:30, 15 December 2022
  • Scenario for developing a stormwater treatment train for a site with limited infiltration capacity
    ...pment,_re-development_and_linear_projects Minimal Impact Design Standards (MIDS) performance goal]. Once complete, the site is meant to be a demonstration ...annual total suspended solids (TSS) EMC of 54.5 milligrams per liter (MIDS calculator defaults). The table below summarizes the existing site runoff volume, and
    38 KB (5,550 words) - 13:29, 12 February 2023
  • Definitions for stormwater and rainwater harvest and use/reuse
    ...and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator]
    5 KB (771 words) - 15:42, 5 December 2022
  • Operation and maintenance (O&M) of swales
    ...s located on public land, private land, or in the public right of way. For example, plantings in the public right of way that conflict with any traffic safety ...interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist [https://stormwater.pca.state.mn.us
    25 KB (3,646 words) - 17:19, 28 January 2023
  • Stormwater management for solar projects and determining compliance with the NPDES construction stormwater permit
    '''Link to Excel calculator for computing volumes''': [[File:Solar panel calculator feb 2021.xlsx]] ...age horizontal length, not the length at the average horizontal angle. For example, if the angle varies between 30 and 60 degrees, the average horizontal leng
    24 KB (3,801 words) - 01:19, 7 December 2022
  • Construction specifications for high-gradient stormwater step-pool swale
    ...ter.pca.state.mn.us/index.php/Example_construction_access_agreement See an example access agreement]. ==Minnesota Department of Transportation example construction protocols==
    21 KB (3,094 words) - 20:46, 27 December 2022
  • Decision tools for stormwater infiltration
    ...http://www.health.state.mn.us/divs/eh/risk/rules/water/ groundwater]). For example, the drinking water standard for zinc is 2 milligrams per liter (mg/L). The ...ired or recommended separation distances are shown in the table below. For example, if bedrock is within 5 feet of the land surface, the BMP depth can only be
    23 KB (3,334 words) - 17:06, 11 January 2023
  • Guidance for completing the MS4 Permit TMDL Application Form
    Example narrative: ''The TMDL study area for X TMDL encompasses the entire municipa ...right|alt=Screenshot of Compliance Schedule tab|<font size=3>Screenshot of example Compliance Schedule Tab, before filling in schedule.</font size>]]
    21 KB (3,255 words) - 14:48, 23 January 2023
  • Information for determining stormwater management impacts for solar projects
    ...age horizontal length, not the length at the average horizontal angle. For example, if the angle varies between 30 and 60 degrees, the average horizontal leng ...m, 35-year continuous simulation XP-SWMM model developed in support of the MIDS performance goal development (Barr, 2011) was modified to represent watersh
    18 KB (2,880 words) - 01:22, 7 December 2022
  • Assessing the performance of infiltration
    ...ion for using infiltration basin/underground infiltration BMPs in the MIDS calculator]]
    7 KB (996 words) - 15:32, 27 December 2022
  • Overview for wet swale (wetland channel)
    ...uirements, recommendations and information for using wet swale in the MIDS calculator] ...mendations and information for using swale side slope as a BMP in the MIDS calculator]]
    14 KB (2,128 words) - 19:42, 27 December 2022
  • Overview for dry swale (grass swale)
    ...mation for using dry swale (grass swale) without an underdrain in the MIDS calculator] ...formation for using dry swale (grass swale) with an underdrain in the MIDS calculator]
    23 KB (3,441 words) - 02:41, 15 December 2022
  • Plants for swales
    ...mation for using dry swale (grass swale) without an underdrain in the MIDS calculator] ...formation for using dry swale (grass swale) with an underdrain in the MIDS calculator]
    33 KB (4,525 words) - 17:15, 8 December 2022
  • References for permeable pavement
    ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    6 KB (734 words) - 02:44, 25 February 2023
  • Cost-benefit considerations for green roofs
    ...r the first five years. Factors that affect maintenance costs include, for example, project size, level of maintenance needed, and proximity of the maintenanc ...veloped the [https://greenroofs.org/green-roof-energy-calculator Greensave Calculator] for Green Roofs for Healthy Cities to “compare roofing alternatives over
    12 KB (1,824 words) - 02:06, 29 December 2022
  • Calculating credits for wet swale (wetland channel)
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...stormwater.pca.state.mn.us/index.php?title=Minimal_Impact_Design_Standards MIDS], the V<sub>WQ</sub> is 1.1 inches times impervious surface area.
    36 KB (5,160 words) - 22:22, 23 November 2022
  • Questions and answers, January 25, 2017 webinar
    ...ons might be considered where a very carefully designed system is used. An example could be where advanced filters are part of the treatment system that remov ...ent. There is likely some good information in the literature, however. For example [https://extension.umd.edu/sites/default/files/_docs/programs/master-garden
    11 KB (1,813 words) - 14:28, 6 December 2022
  • Calculating credits for dry swale (grass swale)
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...stormwater.pca.state.mn.us/index.php?title=Minimal_Impact_Design_Standards MIDS], the V<sub>WQ</sub> is 1.1 inches times impervious surface area.
    65 KB (9,893 words) - 13:52, 29 December 2022
  • Case studies for dry swale (grass swale)
    ...mation for using dry swale (grass swale) without an underdrain in the MIDS calculator] ...formation for using dry swale (grass swale) with an underdrain in the MIDS calculator]
    19 KB (2,874 words) - 20:16, 12 December 2022
  • Recommendations and guidance for utilizing the MPCA Simple Estimator to meet TMDL permit requirements
    ...ce_for_utilizing_the_MIDS_calculator_to_meet_TMDL_permit_requirements MIDS Calculator], the MPCA Simple Estimator is simplified in that it lacks a graphical user ...that do not meet a desired performance goal are considered undersized. For example, if the goal is to treat one inch of runoff from impervious surfaces and a
    28 KB (4,348 words) - 19:45, 14 February 2023
  • Case study for using P8 to meet TMDL permit requirements
    The following case study highlights an example <span title="the amount of a pollutant from both point and nonpoint sources ...tion provides an overview of reporting related to TMDL requirements and an example of how MS4s included in the draft Lake Riley TP TMDL could use P8 modeling
    24 KB (3,840 words) - 15:58, 12 January 2023
  • Calculating credits for stormwater ponds
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...te.mn.us/index.php/Liners_for_stormwater_management geotextile liner], for example HDPE) between the pond and the trench to minimize seepage from the pond int
    59 KB (8,449 words) - 18:13, 1 August 2022
  • Operation and maintenance of filtration
    ...e contractor’s interpretation of the plan is acceptable with the designer. Example construction phase inspection checklists exist for [[Bioretention - constru Example operation and maintenance checklists exist for [[Bioretention - operation a
    7 KB (899 words) - 13:51, 29 December 2022
  • Stormwater infiltration and setback (separation) distances
    ...ement practice'''</span> (BMP) to the particular feature being considered. Example recommended and REQUIRED separation distances for infiltration BMPs are sho ...'''infiltration basin''']</span> located in St. Paul, MN, that treats the MIDS goal of 1.1 inches must treat runoff from 5.25 acres or more of impervious
    18 KB (2,702 words) - 20:15, 18 January 2024
  • Bioretention terminology
    ...s increases, so does the number of names for each of these variants. As an example of the ongoing evolution of bioretention terminology, the terms “rain gar ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]]
    17 KB (2,555 words) - 18:50, 15 August 2022
  • Construction specifications for stormwater and rainwater harvest and use/reuse
    ...tems should be coordinated with any concurrent or related construction. An example construction sequence is shown below. ...This is often the case for stormwater pond and irrigation use systems. For example, initial pond construction and pump installation in new developments could
    6 KB (892 words) - 20:24, 17 November 2022
  • Additional considerations for permeable pavement
    ...exhibit cooler summer temperatures than their impervious counterparts. For example, a recent study showed that porous asphalt showed lower nighttime temperatu ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    7 KB (865 words) - 13:40, 6 January 2023
  • Assessing the performance of permeable pavement
    ...ommendations and information for using permeable pavement BMPs in the MIDS calculator]]
    9 KB (1,176 words) - 15:33, 27 December 2022
  • Examples for completing the TMDL reporting form
    This example set uses Maps 1 and 2, which appear on the left and right hand side of the The example covers a theoretical Twin Cities Metro Area TMDL called the ''Metro Watersh
    32 KB (5,079 words) - 15:54, 5 January 2023
  • Case study for using the MPCA Simple Estimator to meet TMDL permit requirements
    ==Version 2 example: Rochester case study== ...tudy.png|400px|thumb|alt=image of allocations for Zumbro TMDL|<font size=3>Example of TSS TMDL (Zumbro River, West Indian Cr to Mississippi River, 07040004-50
    26 KB (3,920 words) - 16:21, 12 January 2023
  • Minnesota Stormwater Manual test page 5
    ...infrastructure and green stormwater infrastructure, including definitions, example and best management practices, operatyion and maintenance, planning, multip ...tion, including examples, applications, and supporting information for the calculator]
    48 KB (6,516 words) - 21:10, 10 April 2023
  • Calculating credits for bioretention
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...ustrates other processes occurring within the bioretention system. In this example, an underdrain is located at the bottom of the practice.</font size>]]
    70 KB (10,269 words) - 20:36, 17 November 2022
  • Case studies for monitoring to meet TMDL permit requirements
    ...at discharge to the Mississippi River within the South Metro watershed. An example of how outlet monitoring can be used to evaluate compliance with an areal l [[File:BMP example.png|300px|thumb|alt=image Bassett Creek|<font size=3>Schaper Pond configura
    20 KB (2,921 words) - 01:33, 29 December 2022
  • Available stormwater models and selecting a model
    ...s, which results in more complexity in model calibration (WEF, 2012). For example, estimating peak runoff rates is a different problem than estimating the pe ...elers may select multiple models to meet the objectives of the study. For example one model may be best for hydrology and hydraulics, while another may be be
    28 KB (4,130 words) - 11:36, 2 February 2023
  • Green roofs terminology and glossary
    ...ggregate_Drainage_Layer.jpg Drainage layer]: Drainage layers, such as, for example, drainage aggregate, drainage sheets, and drainage mats, convey water acros ...recommendations and information for using green roofs as a BMP in the MIDS calculator]]</noinclude>
    8 KB (1,178 words) - 14:41, 17 January 2023
  • Green roof fact sheet
    ...es on how to design to minimize wind damage in green roofs, including, for example, how to evaluate what roofs are too windy for a green roof, and where a gre ...recommendations and information for using green roofs as a BMP in the MIDS calculator]]</noinclude>
    6 KB (867 words) - 22:40, 3 December 2022
  • Construction specifications for wet swale (wetland channel)
    ...ter.pca.state.mn.us/index.php/Example_construction_access_agreement See an example access agreement]. ...uirements, recommendations and information for using wet swale in the MIDS calculator]
    14 KB (2,049 words) - 20:44, 27 December 2022
  • Operation and maintenance of stormwater wetlands
    ...interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided at [[Stormwater pond/ w ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    7 KB (963 words) - 02:57, 15 December 2022
  • Design considerations for constructed stormwater ponds used for harvest and irrigation use/reuse
    ...euse pond design.png|300px|thumb|alt=schematic of pond design|<font size=3>Example pond design for a harvest and use/reuse system.</font size>]] ...mmendations and information for using stormwater pond as a BMP in the MIDS calculator]]
    8 KB (1,138 words) - 17:04, 29 December 2022
  • Operation and maintenance of high-gradient stormwater step-pool swale
    ...interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided below. *Tailor percent coverage requirements to project goals and vegetation. For example, percent cover required for turf after one growing season would likely be 1
    28 KB (4,150 words) - 13:38, 11 February 2023
  • 2020 MS4 General Permit Section 12 Stormwater Pollution Prevention Program (SWPPP) Document
    ....us/index.php?title=MIDS_calculator Minimal Impact Design Standards (MIDS) calculator]", "[https://stormwater.pca.state.mn.us/index.php/Guidance_and_examples_for
    18 KB (2,714 words) - 17:43, 22 November 2022
  • Operation and maintenance of tree trenches and tree boxes
    ...y increasing both evapotranspiration and infiltration, harvest runoff, for example, from adjacent impervious surfaces, and use harvested runoff to irrigate tr Wood mulch provides many benefits to the tree, including, for example, weed and turf suppression, and increased moisture retention. It also impro
    15 KB (2,288 words) - 21:43, 24 January 2023
  • Construction specifications for dry swale (grass swale)
    ...ter.pca.state.mn.us/index.php/Example_construction_access_agreement See an example access agreement]. ==Minnesota Department of Transportation example construction protocols==
    22 KB (3,332 words) - 20:46, 27 December 2022
  • Operation and maintenance of tree trenches and tree boxes - supplemental information
    ...rmwater_and_rainwater_harvest_and_use/reuse harvest]'''</span> runoff, for example, from adjacent impervious surfaces, and use harvested runoff to irrigate tr [[File:Tree guying.png|300px|thumb|alt=picture tree guying|<font size=3>Example of tree staking. Image [https://extension.umn.edu/planting-and-growing-guid
    18 KB (2,726 words) - 16:12, 9 February 2023
  • Overview for bioretention
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    19 KB (2,778 words) - 19:25, 27 December 2022
  • Minnesota Stormwater Manual email Updates
    **[[Street Sweeping Phosphorus Credit Calculator]] ..._sweeping#Street_sweeping_crediting_and_Phosphorus_Calculator the Sweeping Calculator tool]
    73 KB (10,517 words) - 17:44, 19 July 2023
  • Calculating credits for tree trenches and tree boxes
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...stormwater.pca.state.mn.us/index.php?title=Minimal_Impact_Design_Standards MIDS], V<sub>WQ</sub> is 1.1 inches times the impervious surface area.
    75 KB (11,201 words) - 18:43, 13 December 2022
  • Street sweeping for trees
    ...=Methods_for_calculating_pollutant_reductions_for_street_sweeping Planning Calculator Tool for Estimating Nutrient and Solids Load Recovery through Street Sweepi ...php?title=Methods_for_calculating_pollutant_reductions_for_street_sweeping calculator tool] “for predicting sediment and nutrient loads to street surfaces in u
    22 KB (3,194 words) - 18:47, 20 February 2023
  • Operation and maintenance of swales - supplemental information
    *Tailor percent coverage requirements to project goals and vegetation. For example, percent cover required for turf after one growing season would likely be 1 ...nt terms of the maintenance work are defined in the Agreement. Below is an example list of maintenance standards from an actual Maintenance Agreement.
    27 KB (4,015 words) - 21:34, 24 January 2023
  • Event mean concentrations of total suspended solids in stormwater runoff
    ...land use 2.jpg|300px|thumb|alt=image of residential land use|<font size=3>Example of residential land use</font size>]] ...l land use 1.jpg|300px|thumb|alt=image of commercial land use|<font size=3>Example of commercial land use</font size>]]
    42 KB (6,054 words) - 16:46, 23 March 2023
  • BMP terminology
    .... Engineered media is used in nearly all structural BMPs and includes, for example, media designed for vegetative growth (e.g. [http://stormwater.pca.state.mn ...cipitation) that is intercepted by a tree. Average values used in the MIDS calculator are 0.043 inches for deciduous trees and 0.087 inches for conifers. Units a
    10 KB (1,624 words) - 15:09, 6 January 2023
  • Guidance and examples for using the MPCA Estimator
    The MPCA Estimator spreadsheet presents a calculator approach to computing pollutant loading and the pollutant load reduction fo ...be better dealt with by treating land uses as different subwatersheds. For example, a single residential area highly impacted by emerald ash borers may be tre
    98 KB (15,156 words) - 16:40, 5 January 2023
  • Recommendations and guidance for utilizing lake monitoring to meet TMDL permit requirements
    [[File:Monitoring 3.png|300px|thumb|alt=lake monitoring image|<font size=3>Example of lake monitoring. Photo courtesy of MPCA's Flickr site.</font size>]] ...APPs. Additionally, includes documents related to the development of SOPs, example SOPs (e.g., lake monitoring SOP), and State-certified laboratory guidance a
    33 KB (4,626 words) - 13:47, 10 February 2023
  • Old Minnesota Stormwater Manual Table of Contents
    .../folder/40078/share/185-FjOXOf5K1y-ATbRCb0V--jS-Mw6M Version 4 of the MIDS Calculator] *[[MIDS calculator videos]]
    24 KB (3,277 words) - 15:12, 19 July 2023
  • Old Minnesota Stormwater Manual Main page
    .../folder/40078/share/185-FjOXOf5K1y-ATbRCb0V--jS-Mw6M Version 4 of the MIDS Calculator] *[[MIDS calculator videos]]
    24 KB (3,277 words) - 15:20, 19 July 2023
  • Operation and maintenance of stormwater ponds
    ...perform basic landscape maintenance activities (the City of Plymouth, for example, has instituted such a program). More significant maintenance such as remov ...interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided at [[Stormwater pond/ w
    9 KB (1,171 words) - 21:56, 24 January 2023
  • Table of Contents test page
    ...r application. An example would be application of a model such as the MIDS Calculator to a hypothetical situation. Some examples, however, are based on actual ap ...ains information no longer actively used. It includes information from the MIDS development process, the Stormwater Steering Committee, older maps, and old
    89 KB (12,875 words) - 13:29, 9 February 2023
  • Overview for stormwater wetlands
    ...00 px|alt=This photo shows an example of a stormwater wetland|<font size=3>Example of a stormwater wetland in a suburban area.</font size>]] ...ndations and information for using stormwater wetland as a BMP in the MIDS calculator.]]
    11 KB (1,665 words) - 19:32, 11 August 2022
  • Stormwater Manual Table of Contents
    ...r application. An example would be application of a model such as the MIDS Calculator to a hypothetical situation. Some examples, however, are based on actual ap ...ains information no longer actively used. It includes information from the MIDS development process, the Stormwater Steering Committee, older maps, and old
    89 KB (12,945 words) - 15:54, 29 August 2023
  • BMP practices construction costs maintenance costs and land requirements
    In this MIDS task, Barr was asked to summarize a typical range of low-impact development ...tory requirements,nreported soil conditions, and other site specifics. For example, variable design parameters that could affect the total construction cost i
    36 KB (5,524 words) - 14:44, 8 December 2022
  • Operation and maintenance (O&M) of tree trenches and tree boxes
    ...nt practice or device needed to meet a water quality or quantity goal. For example, stormwater BMPs may be sized to treat a volume of runoff, a flow rate, or ...s located on public land, private land, or in the public right of way. For example, plantings in the public right of way that conflict with any traffic safety
    28 KB (3,985 words) - 16:12, 9 February 2023
  • Design criteria for wet swale (wetland channel)
    *Typical dry swale profile section with check dams and draintile: [[File:MIDS Dry Swale Sections-SHEET 2.pdf]] *[[File:MIDS Dry Swale Sections-SHEET 2 (2).pdf]]
    25 KB (3,758 words) - 17:15, 29 December 2022
  • Test page 6
    ...and information for using bioretention with no underdrain BMPs in the MIDS calculator]] ...and information for using bioretention with an underdrain BMPs in the MIDS calculator]]
    18 KB (2,519 words) - 16:10, 2 February 2023
  • Types of sand (media) filters
    ...recommendations and information for using sand filter as a BMP in the MIDS calculator]]
    9 KB (1,374 words) - 18:59, 31 January 2023
  • Cost-benefit considerations for stormwater and rainwater harvest and use/reuse
    The site setting affects the cost of harvest and use systems. For example, in highly urban areas the choices for stormwater treatment may be limited ...and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator]
    11 KB (1,495 words) - 20:51, 12 December 2022
  • Types of tree BMPs
    ...Mall.jpg|300px|thumb|alt=photo of a suspended pavement system|<font size=3>Example of a structural cell (suspended pavement) at the Tyron Street Mall in Charl ...echnique to build suspended pavement is through the use of soil cells. An example is [https://www.deeproot.com/products/silva-cell.html Silva Cells], modular
    19 KB (2,801 words) - 11:38, 26 January 2023
  • Case studies for wet swale
    For the plan set for this example, link to this file - [[File:Carpenter Creek detail.pdf]]. ...plantings were placed in areas where they could establish and thrive. An example of this was an area where ponding in the swale was higher than anticipated.
    27 KB (3,916 words) - 20:08, 12 December 2022
  • Operation and maintenance (O&M) of permeable pavement - supplemental information
    ...raph.jpg|thumb|300px|alt=a photo illustrating porous concrete|<font size=3>Example of a new retrofit permeable parking lot at the University of Minnesota</fon ...maintained and continues functioning. The local authority should use this MIDS guideline to establish measurable performance criteria for enforcing mainte
    13 KB (1,791 words) - 14:02, 30 December 2022
  • Phase I MS4 Guidance for completing the TMDL Annual report form
    ...ream TMDLs will therefore be labeled by TMDL Project Name + Pollutant. For example, if the Permittee has TSS WLAs on four stream reaches in a single project, ...|alt=image of Column E BMP list|<font size=3>List of BMPs included in this example section. The BMPs are from the dropdown list in Column E of the ''BMP-activ
    50 KB (7,798 words) - 21:24, 4 January 2023
  • Recommendations and guidance for utilizing P8 to meet TMDL permit requirements
    ...upplementary information not included in model documentation, and provides example case studies showing how P8 can be used to demonstrate TMDL compliance. ...should not be used for modeling purposes. These files are provided only as example files of how the precipitation (“.pcp”) and temperature (“.tem”) fi
    32 KB (4,742 words) - 13:34, 10 February 2023
  • Calculating credits for iron enhanced sand filter
    .../Performance_goals_for_new_development,_re-development_and_linear_projects MIDS performance goal]; or ...ently provides a 60% credit for Tier 2. We do not anticipate modifying the calculator in the near future.|alert-warning}}
    24 KB (3,625 words) - 01:28, 23 December 2022
  • Case studies for stormwater treatment trains
    ...r Filters in Heritage Park.png|left|thumb|300 px|alt=This photo shows a an example of Stormwater Filters in Heritage Park|<font size=3>Stormwater filters in H *http://www.tpomag.com/editorial/2009/03/setting-an-example
    31 KB (4,434 words) - 01:47, 29 December 2022
  • Operation and maintenance of dry swale (grass swale)
    ...interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided below. *Tailor percent coverage requirements to project goals and vegetation. For example, percent cover required for turf after one growing season would likely be 1
    26 KB (3,869 words) - 22:32, 31 January 2023
  • Recommendations and guidance for utilizing stream monitoring to meet TMDL permit requirements
    ...APPs. Additionally, includes documents related to the development of SOPs, example SOPs (e.g., lake monitoring SOP), and State-certified laboratory guidance a **Module 3 – Model QAPP: provides and model example of a completed QAPP.
    40 KB (5,726 words) - 19:32, 14 February 2023
  • Operation and maintenance of green roofs - supplemental information
    Weeds that are especially common on green roofs include, for example ...erm may refer to areas as small as a few square meters or square feet (for example a garden bed or a cave) or as large as many square kilometers or square mil
    12 KB (1,839 words) - 23:38, 3 December 2022
  • Overview for sand (media) filters
    ...eable surface and typically have limited space to install surface BMPs. An example would be a downtown area."> '''highly urban and ultra-urban environments''' ...both of which will adversely impact the life and operation of the BMP. For example, a filtration device designed to treat the first 0.5 inch of runoff from a
    13 KB (1,897 words) - 13:47, 29 December 2022
  • Overview for stormwater ponds
    ...mmendations and information for using stormwater pond as a BMP in the MIDS calculator]]
    12 KB (1,884 words) - 21:46, 7 February 2023
  • Design criteria for dry swale (grass swale)
    *Typical dry swale profile section with check dams and draintile: [[File:MIDS Dry Swale Sections-SHEET 2.pdf]] *[[File:MIDS Dry Swale Sections-SHEET 2 (2).pdf]]
    43 KB (6,506 words) - 16:08, 29 December 2022
  • Events
    *Minimal Impact Design Standards (MIDS) Calculator Webinar: Wednesday, '''March 15 from 1:30-3:00'''. The webinar included i ..., the MIDS calculator, linking research to the Manual and an update on the MIDS Community Assistance Package. For more information, contact Anne Gelbmann
    42 KB (5,832 words) - 18:59, 3 December 2022
  • Assessing total suspended sediment and total phosphorus removal efficiency of permittee owned/operated constructed stormwater ponds
    ...design level (e.g., 84% TSS removal for Design Level 2). Criteria for each MIDS stormwater pond design level are summarized in the following table. {{:MIDS Calculator stormwater pond design level criteria related to pond volume}}
    85 KB (12,688 words) - 10:05, 26 January 2023
  • Operation and maintenance of green roofs
    Level of maintenance needed is influenced by many factors, such as, for example, project goals, and project location (e.g. proximity to weed sources, views ...on a green roof, as green roofs will always be exposed to weed seeds, for example, via wind and birds, weeding is particularly important during the establish
    11 KB (1,611 words) - 21:39, 7 February 2023
  • Industrial stormwater program
    ...ve language inserted into table format, one row per requirement. To see an example of a before-and-after stormwater permit, compare our Construction Stormwate ...xamples: 2. Domestic and industrial wastewater and process wastewater. For example, wash water, commercial equipment and/or vehicle cleaning.
    12 KB (1,550 words) - 16:56, 24 January 2023
  • MS4 fact sheet - Urban Forestry & Stormwater Management
    ...considering allowing credit for the interception of rainfall by trees. For example, the [http://www.capitolregionwd.org/ Capitol Region Watershed District] is ...e [https://stormwater.pca.state.mn.us/index.php?title=MIDS_calculator MIDS calculator], [https://stormwater.pca.state.mn.us/index.php?title=Calculating_credits_f
    10 KB (1,540 words) - 23:04, 23 January 2023
  • Case studies for stormwater and rainwater harvest and use/reuse
    ...olume control approximately 1.8 acre-feet (570,000 gallons) per year. MIDS calculator estimates pollutant reductions of approximately 1.5 pounds of phosphorus (0 ...and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator]
    25 KB (3,602 words) - 01:16, 29 December 2022
  • Event mean concentrations of total and dissolved phosphorus in stormwater runoff
    ...land use 2.jpg|300px|thumb|alt=image of residential land use|<font size=3>Example of residential land use</font size>]] ...l land use 1.jpg|300px|thumb|alt=image of commercial land use|<font size=3>Example of commercial land use</font size>]]
    66 KB (9,306 words) - 16:44, 23 March 2023
  • Construction guidelines for tree trenches and tree boxes
    ...techniques, sequencing, and pay items, and prepare a thorough SWPPP plan. Example techniques include compost logs ([https://www.dot.state.mn.us/pre-letting/s ...e or avoid soil compaction to the extent feasible. Techniques include, for example, using drivable mats, using tracked machinery, and machinery with long arms
    24 KB (3,593 words) - 16:11, 9 February 2023
  • Water quality considerations for stormwater and rainwater harvest and use/reuse
    ...and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator]
    13 KB (1,814 words) - 18:54, 18 July 2022
  • Stormwater wet pond fact sheet
    ...ry function, which is to capture, retain, and treat stormwater runoff. For example, it is generally not appropriate to introduce fish to wet ponds as the fish ...and_maintenance_of_stormwater_ponds#Example_maintenance_agreements link to example maintenance agreements]).
    12 KB (1,895 words) - 23:45, 30 January 2023
  • Environmental concerns for stormwater and rainwater harvest and use/reuse
    **Organic matter (measured by BOD, COD, or TOC), for example from glass clippings, that causes reduced dissolved oxygen levels through d ...and information for using Harvest and re-use/cistern as a BMP in the MIDS calculator]
    15 KB (2,078 words) - 14:35, 17 January 2023
  • Operation and maintenance of bioretention
    ...interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided here. *tailoring percent coverage requirements to project goals and vegetation. For example, percent cover required for turf after 1 growing season would likely be 100
    22 KB (3,054 words) - 14:21, 24 January 2023
  • Summary of data received from permittees on MS4 TMDL permit reporting forms
    ...Eagle Valley - Woodbury Minnesota example of narrow street|<font size=3>An example of a narrow street from Woodbury, Minnesota. Reducing street width reduces ...e included in only a handful of reporting forms. The City of Plymouth, for example, listed 206 drain inlet inserts in the report. The cities of Brooklyn Cente
    19 KB (2,793 words) - 18:14, 30 January 2023
  • Soil amendments to enhance phosphorus sorption
    ...w cost technique to improve long term dissolved P removal. Steel wool, for example, has been found to increase the material cost by 3 to 5 percent ([[Soil ame ...ents, recommendations and information for using trees as a BMP in the MIDS calculator]]
    25 KB (3,641 words) - 22:43, 28 January 2023
  • Operation and maintenance of wet swale (wetland channel)
    ...interpretation of the plan is acceptable to the professional designer. An example construction phase inspection checklist is provided below. *Tailor percent coverage requirements to project goals and vegetation. For example, percent cover required for turf after one growing season would likely be 1
    24 KB (3,567 words) - 13:21, 7 February 2023
  • Case studies for tree trenches and tree boxes
    ...ents, recommendations and information for using trees as a BMP in the MIDS calculator]] ...ns and information for using trees with an underdrain as a BMP in the MIDS calculator]]
    26 KB (3,860 words) - 16:10, 9 February 2023
  • Design criteria for high-gradient stormwater step-pool swale
    **Typical dry swale profile section with check dams and draintile: [[File:MIDS Dry Swale Sections-SHEET 2.pdf]] **[[File:MIDS Dry Swale Sections-SHEET 2 (2).pdf]]
    65 KB (10,011 words) - 17:11, 29 December 2022

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://stormwater.pca.state.mn.us/index.php?title=Special:Search"

Privacy policy